Vanderbilt DT930 User manual
DT930 IP Touch Panel Phone Start Guide
Make a Call with a Headset
1. Lift the handset or press the Speaker
key.
2. Dial the required number (For external
calls, dial the Trunk access Code 9 first).
Transfer a call
1. Press the Transfer Key while
speaking to someone.
2. Enter the number of the person
you wish to transfer.
3. Press the Conf window on the
touch screen to talk to both
parties at same time OR
4. Hang-up to transfer the call.
*You can hang-up before the second
person answers to transfer the call
without announcing to the second
person.
Make a Call with the Speaker phone
1. Press the Speaker key
2. Dial the required number (For external
calls, dial the Trunk access Code 9 first).
Access Your Voicemail Service
1. Dial 8999 to access your
voicemail.
2. When prompted entered your
password.
Mute your Audio
1. Press Mic
2. Press Mic again to turn mute off
https://www.vumc.org/it/voice-vanderbilt-bedford-county-hospital
DT930 IP Touch Panel Phone Start Guide (cont.)
Setting up your voice mail
1. Press Feature.
2. Press Enter.
3. Dial desired “Voicemail System” access
code.
4. Press Feature again.
Answer a call
1. Press the Answer key.
2. Lift the handset or press the
Speaker key and talk hands free.
*If you are talking hands free, you will
need to turn on your microphone to be
heard. To do this, simply press the Mic
key on your handset.
Originate your voice mail
1. Press one-touch key registered
voicemail access.
2. Hear ring back tone.
3. Next, follow the voicemail
guidance. For more details, refer
to the voicemail user guide
Access Your Voicemail Service
1. Dial 8999 to access your
voicemail.
2. When prompted entered your
password.
Mute your Audio
1. Press Mic
2. Press Mic again to turn mute
off
https://www.vumc.org/it/voice-vanderbilt-bedford-county-hospital
Transfer a call
While you are already talking to someone, regardless if they called you or you called them,
press the Transfer key.
You will hear a broken dial tone. Enter the number of the person you wish to transfer the
call to, during this time the other person is placed on hold.
When the second person answers you can:
•Press the Transfer key again to alternate between the parties
•Press the CONF window on the touch screen to talk to both parties.
•Hang up to transfer the call.
Note: You can hang up before the second person answers to transfer the call without
announcing it to the second person.
https://www.vumc.org/it/voice-vanderbilt-bedford-county-hospital
Transfer with two other people (Conference)
While you are already talking to someone, regardless if they called you or you called them,
Press the Transfer key.
•You will hear a broken dial tone. Enter the number of the person to whom you wish to
transfer the call.
•When the second person answers you press the CONF window on the touch screen.
You can hang up at any time to exit the conference. The other two parties will remain
connected.
https://www.vumc.org/it/voice-vanderbilt-bedford-county-hospital
•If you are having an issue or need help setting
up a phone, contact the VUMC IT Help Desk at
615-343-4357 (HELP) or submit a Pegasus
ticketing using the following link:
https://pegasus.vumc.org/ViewCI.aspx?id=143
135.
•Information on how to submit a Pegasus
Ticket is here.
Assistance and Support
https://www.vumc.org/it/voice-vanderbilt-bedford-county-hospital
Table of contents
