VanGaa Lighting VG-FL650 User manual

VG-FL650 650W Fresnel Spot light User Manual VG-FL650 650W Fresnel Spot light User Manual
650W Fresnel Spot Light
VG-FL650
CE RoHS
User Manual
Please read this user manual before using this product！
Keep it for further reference!
http://www.vangaalight.com

VG-FL650 650W Fresnel Spot light User Manual VG-FL650 650W Fresnel Spot light User Manual
INDEX
ⅠPRODUCT MAIN FEATURES ............................................. 01
ⅡSTRUCTURE..................................................................... 01
ⅢSAFETY INFORMATION ................................................... 02
ⅣPOWER CONNECTION...................................................... 03
ⅤLUX CHART ..................................................................... 05
ⅥTECHNICAL SPECIFICATION ........................................... 06
Thank you for using our product! Please read this manual carefully and completely. For
technical reference in future, please keep this user manual well. This user manual contains
all installation and operation information of this Fresnel Spot Light, it’s very useful for user
to install and operate the light. Please strictly abide by the relevant instruction for the
installation and operation.
This light has very beautiful appearance. Based on the Fresnel Spot Light Technology, using
high brightness lamp beads matrix arrangement of large area, through the whole aluminum
shell to realize heat dissipation naturally, we have designed this light. This light has high
brightness, good head dissipation, ultra-quiet and other features. It can satisfy the
requirement of indoor movie filming for the lighting layout. It is a good substitute of the
traditional Fresnel spot light, which is very suitable for the studio room, TV station, Meeting
room, stage, show and other entertainment places.
This light meets the following criteria:
GB7000.1-2007/IEC60598-1:2003
GB7000.217-2008/IEC60598-2-17:1984+A2:1990
ⅠPRODUCT MAIN FEATURES
·High power, high brightness;
·Easy install, and easy replace the bulb;
·High CRI, suitable for video taking.
ⅡSTRUCTURE
01

VG-FL650 650W Fresnel Spot light User Manual VG-FL650 650W Fresnel Spot light User Manual
1. Locker
2. Hanging adaptor
3. Handle
4. Zoom rotary knob
5. Locker for barn doors
6. Locking arm knob
ⅢSAFETY INFORMATION
※Important
Every person involved with the installation, operation and maintenance of this device has to
be qualified and follow the instructions of this manual. Manufacturer will not with
responsibility for those operations which are not according to this Instruction.
Verify that the voltage matches the rated voltage.
When the voltage is 110V, Do not connect more than 10 lightings in total to AC mains
power in one interconnected daisy chain
When the voltage is 220V, Do not connect more than 20 lightings in total to AC mains
power in one interconnected daisy chain
Before using the fixture, check that all power distribution equipment and cables are in
perfect condition and rated for the current requirements of all connected devices.
Always ground (earth) the fixture electrically.
Avoiding hit the Light when you are move or install the light.
The minimum distance between light-output and the illuminated surface must be more
than 0.5 meters. Keep all combustible materials (for example fabric, wood, paper) at least
0.2 meters away from the fixture.
Do not expose the fixture to rain or moisture.
Avoid looking directly into the light source (especially those who suffer from epileptic fits)
Maximum ambient temperature (Ta) is 40°C. Do not operate fixture at temperatures higher
than this.
The Maximum surface temperature is 50°C
When suspending the fixture above ground level, verify that the structure can hold at least
10 times the weight of all installed devices.
Verify that all external covers and rigging hardware are securely fastened and use an
approved means of secondary attachment such as a safety cable.
ⅣPOWER CONNECTION
INSTALLING A NENUTRIK CONNECTOR ON A POWER CABLE
03
02

VG-FL650 650W Fresnel Spot light User Manual VG-FL650 650W Fresnel Spot light User Manual
Put bushing and chuck onto the cable.
Prepare cable as shown above. The power cable must is a three-conductor 2.5mm2 cable.
Insert the wire into the terminals and fasten the clamping device by a flat screw driver.
Push insert and chuck into housing (pay attention to the guiding keyway).
Fasten bushing.
The color-coding schemes and some possible pin identification schemes; if pins are not
clearly identified, or if you have any doubts about proper installation, consult a qualified
electrician.
RELAYING POWER TO OTHER DEVICES
The lightings can be linked in a chain by power cables which installed a blue and a
light-gray connectors on the two ends. The light-gray connector connects to the power out
socket of the first lighting, and the blue connector connects to the power in socket of the
subsequent lighting, and so on.
The power cable must is a three-conductor 2.5mm2 cable.
When the voltage is 110V, Do not connect more than 10 lightings in total to AC mains
power in one interconnected daisy chain.
When the voltage is 220V, Do not connect more than 20 lightings in total to AC mains
power in one interconnected daisy chain.
PHYSICAL INSTALLATION
This lighting can be placed on a horizontal surface such as a stage or clamped to a truss or
similar rigging structure in any orientation using a rigging clamp.
When suspending the fixture above ground level, verify that the structure can hold at least
10 times the weight of all installed devices.
Verify that all external covers and rigging hardware are securely fastened and use an
approved means of secondary attachment such as a safety cable.
ⅤLUX CHART
Wire color
Conductor
Symbol
Brown
Live
L
Blue
Neutral
N
Yellow/green
ground
05
04
05

VG-FL650 650W Fresnel Spot light User Manual VG-FL650 650W Fresnel Spot light User Manual
ⅥTECHNICAL SPECIFICATION
Light Sources
·Bulb: 1pc 650W Lamp CP89, GY9.5
·Average lifespan of lamp: 5000h
·Color: warm white
Optics
·Dimmer: 0-100% linear dimmer
·Lens: φ112mm
Light Output
·Distance: 2.5m, 3.5m, 4.5m
·Condensed light: 0.5m, 0.7m, 0.9m
·Middle light: 1.3m, 1.9m, 2.4m
·Astigmatism: 2.4m, 3.4m, 4.4m
Control
·Control mode: manual
·Control panel: switch, rotary knob
Power Supply
·Related voltage: AC110V/220V, 50/60Hz
·Related power: 700W
Construction
·Body dimension: D215*W181*H189mm
·Net weight: 3.6kg
·Shell color: sliver and blue
·Shell material: aluminium
Working Environment
·Working temperature: -25-40℃
·Cooling: Fan
·Protection rating: IP20
Innovation, Quality, Performance, Achieving Users’Value!
07
06