Vanguard W202B User manual

Assembly Instructions
Two Person Assembly Required
W202B Dining Table
Thank you for your purchase of Vanguard Furniture.
A
A
A
A6
NO. DESCRIPTION Q'TY
HARDWARE PACKAGE
Wood Screw #8x1 1/4"
1 Flip top upside down and lay on a carpet surface or blanket.
2 Remove the bridge as shown in Detail View A and throw away. It is not needed for this assembly.
3 Flip pedestal base upside down and align it on the center of the top (note the grain direction of the top .
4 Using the provided screws, screw through the holes into the bridge.
Repeat for the other 5 screws
5 Flip the assembled base and top back to the upright position.
Detail
View A
Throw Away
Not needed
for this assembly B6
Rubber Glass Bumpers
(used instead of screws
for glass tops only)
A
A
A

Assembly Instructions
Two Person Assembly Required
1) Flip top upside down and lay on a carpet surface or blanket.
2) Remove t e bridges as s own in Detail View A and t row away. T ey are not needed for t is assembly.
3) Flip pedestal base upside down and align it on t e center of t e bridge.
4) Using t e provided screws, screw t roug t e oles into t e bridge.
Repeat for t e ot er 11 screws
5) Repeat steps 3 and 4 for t e second base.
6) Flip t e assembled base and top back to t e uprig t position.
T ank you for your purc ase of Vanguard Furniture.
Detail
View A
Throw Away -
Not needed
for this assembly
A12
NO. DESCRI TION Q'TY
Wood Screw #8x1-1/4"
B12
Rubber Glass Bumpers
(used instead of screws
for glass tops only)
HARDWARE ACKAGE
W202B Dining Table
A
A
A
Throw Away -
Not needed
for this assembly
A
A
A
A
A
A
A
A
A