Vantec NexStar-DX User manual

USER’S MANUAL
RoHS
eSATA Bracket Included

Package Contents:
15.25” NexStar®DX Enclosure
2Power Cable
3eSATA Cable
5SATA to eSATA Bracket
4USB Cable
6CD Driver
7Installation Screws
8User’s Manual
TRADEMARKS
MS-DOS, Microsoft, Windows NT/2000/ME/XP/Vista are trademarks of Microsoft Corporation.
Apple, Macintosh and Mac are trademarks of Apple Computer
*All other third-party brands and names are the property of their respective owners.
SATA
SATA
3
7
1
4
NexStar DX EXTERNAL 5.25” SATA ENCLOSURE
USB 2.0/eSATA INTERFACE
®
2
USER’SMANUAL
8
6
5

1. Introduction ................................................................................................................02
2. Specifications / Features
NexStar® DX EXTERNAL 5.25”SATA ENCLOSURE USB 2.0/eSATA INTERFACE .............................03
3. System Requirements ......................................................................................04
4. Parts Layout
NexStar® DX EXTERNAL 5.25”SATA ENCLOSURE USB 2.0/eSATA INTERFACE...............................05
5. Installation
NexStar® DX EXTERNAL 5.25” SATA ENCLOSURE USB 2.0/eSATA INTERFACE
5.1. Hardware Installation................................................................................................06
5.2 Driver Installation......................................................................................................09
7. Warranty .........................................................................................................................10
8. Contact .............................................................................................................................10
Table of Contents
1
Table of Contents:

Introduction
2
NST-530SU
1. Introduction:
With the Vantec NexStar®DX External 5.25" Enclosure,
you can easily add any 5.25" optical drive to your
existing system. The NexStar®DX connects to your
computer through USB 2.0 & eSATA, offering speeds
up to 480Mbps-1.5Gbps and even supports Blu-Ray
drives! The NexStar® DX is perfect for anyone looking
to add any 5.25" device, such as a DVD burner, to any
notebook or desktop computer. Because you don't
have to open your computer, you will not have to
worry about voiding your existing warranty or dealing
with messy wires. The integrated fan and aluminum
case keeps your device cool and operating at optimum
conditions. The NexStar®DX External 5.25" Enclosure
is the smart way to upgrade any computer.

NexStar DX EXTERNAL 5.25” SATA ENCLOSURE
USB 2.0/eSATA INTERFACE
®
Specifications/Features
3
2. Specifications/Features:
Specifications:
• Model: NST-530SU
• Device Support: CD-ROM/R/RW, DVD-ROM/R/RW, Blu-Ray
• Device Size: 5.25”
• Internal Interface: Serial ATA
• External Interface: USB 2.0 / eSATA
• Power Supply: AC Adapter
• Transfer Rate: USB 2.0 (Up to 480Mbps)
eSATA (Up to 1.5Gbps)
• Material: Aluminum
• Dimensions: 252 x 172 x 49 mm
• Transfer Rates Up to 480Mbps w/USB 2.0
• Transfer Rates Up to 1.5Gbps w/eSATA
• Easily Add a 5.25” SATA Device to Any System with USB or eSATA
• Blu-Ray Drive Compatible
• Hot-Swappable: Plug & Play Without Rebooting
• Integrated Cooling Fan
• Easy Installation Without Opening Your Computer
• Aluminum Casing
Features:
Power Switch
Fan
SATA
Power Connection
USB 2.0 Port
eSATA Port
Audio Port

3. System Requirements:
System Requirements
4
Intel Pentium II 266 MHz-compatible
Microsoft Windows 2000/XP/Vista.
1. 64MB RAM or higher
2. USB-equipped system with available
USB port
3. eSATA-equipped system with available
eSATA port
4. For USB 2.0 speeds, the system must
support USB 2.0 specifications.
5. For SATA, the system must support SATA
specifications.
Mac G3 processor & greater
Mac OS 9.x & greater
1. 64MB RAM or higher
2. USB-equipped system with available
USB port
3. eSATA-equipped system with available
eSATA port
4. For USB 2.0 speeds, the system must
support USB 2.0 specifications.
5. For SATA, the system must support SATA
specifications.

NexStar DX EXTERNAL 5.25” SATA ENCLOSURE
USB 2.0/eSATA INTERFACE
®
4. Parts Layout:
Parts Layout
5
Audio Cable
Aluminum Housing SATA Cable
Power Cable

NexStar DX EXTERNAL 5.25” SATA ENCLOSURE
USB 2.0/eSATA INTERFACE
®
5. Installation:
Installation
6
(1) Remove the back plate from the enclosure.
( Figure 5.1-A )
( Figure 5.1-A )
( Figure 5.1-B )
( Figure 5.1-C )
(2) Slide the tray out from the housing.
( Figure 5.1-B )
(3) Insert the 5.25" device into the enclosure.
( Figure 5.1-C )
5.25” Device
5.1. Hardware Installation:

Installation
7
(6) Align the device so that the front of the device
is flushed with the front of the NexStar® DX.
( Figure 5.1-F )
( Figure 5.1-E )
( Figure 5.1-F )
(5) Tighten the 4 screws on both sides of 5.25” device.
( Figure 5.1-E )
Audio Cable
SATA Cable
Audio PortSATA Port
( Figure 5.1-D )
(4) Connect the SATA and power cable to the device
as shown. ( Figure 5.1-D )

Installation
8
Using the Audio Jack:
1) If you have connected the audio cable to your 5.25"
device, you can access the audio through the Audio
Jack, labeled "AUDIO" as pictured on the right. Using
a standard 3.5mm plug, youcan connect the
Nexstar® DX to a pair of headphones or to a speaker
setup. ( Figure 5.1-H )
( Figure 5.1-H )
(7) Slide the housing back onto the tray and attach
with the screws provided. ( Figure 5.1-G )
( Figure 5.1-G )

Mac OS 9.0 or later :
(1) No drivers are necessary when using Mac
9.0 or later. If the hard drive does not appear
on the desktop, be sure to partition your
hard drive.
Windows XP/2000/VISTA:
(1)No drivers are necessary when using Windows
XP/2000/VISTA. If the device does not
appear under My Computer, you may need
to install drivers for the 5.25” device
(not Nexstar®DX). Please refer to the 5.25” device’s
instructions on how th install its drivers.
Disconnecting the Nexstar® DX
9
Mac OS 8.6 :
(1) Unplug the Nexstar® DX if you currently
have it connected.
(2) USB Mass Storage Support 1.3.5 must be
installed on your system. If it is not, you may
download the USB Mass Storage Support 1.3.5
update from the Apple software website :
http:// www.apple.com/support
(3) Follow the direction associated with the USB
Mass Storage Support driver to install.
(4) Repeat the steps listed under “Connecting
the Nexstar® DX to your computer.”
5.2 Driver Installation:

Warranty/Contact
10
6. Warranty:
7. Contact :
Vantec Thermal Technologies
43951 Boscell Rd.
Fremont, CA 94538
tel: [phone]
fax: [phone]
website: www.vantecusa.com
The NexStar® DX comes with a 1 year limited
warranty ( 90 day parts ) . If your unit should
become defective within that time frame, please
goto http://www.vantecusa.com for information
on how to receivewarranty exchange or repair.
Cosmetic defects and missing parts are not
covered under this warranty. Please check
the contents of the unit to make sure you received
all parts. Also, check for any cosmetic flaws.
If any parts are missing or if there are cosmetic
defects, please contact the retailer from which
you purchased the unit immediately and ask for
a replacement.
Copyright © 2009 Vantec Thermal Technologies. All Right Reserved.
All Registered Trademarks Belong To Their Respective Companies.