Vari Lite VL2000 User manual

VARI❋LITE® - VL2000™ S POT L UMINAIRE S ERVICE M ANUAL
ii 24-March-2004 02.9673.0010 D
VARI❋LITE®, Artisan®, mini-Artisan®, mini-Artisan®2, Artisan®Plus, mini-Artisan®Plus, VL2®, and VLD®are
trademarks owned by Genlyte Thomas Group LLC. and are registered in the United States and other countries.
VL1000™, VL2000™, VL2201™, VL2202™, VL2400™ (and the individual product designations), VL3000™, Virtuoso™,
Virtuoso™ DX, VARI❋LITE Visionary™, VL1™, VL2B™, VL2C™, VL3™, VL4™, VL5™, VL5Arc™, VL5B™, VL6™,
VL6B™, VL6C™, VL7™, VL7B™, VLM™, APS6™, C3™, ArtisanVLQ™, SPC-36™, UDM™, AutoTruss™, SmartDMX™,
Smart Repeater™, Series 100™, Series 200™, Series 300™, Series 2000™, Series 3000™, DICHRO❋WHEEL™,
DICHRO❋TUNE™, VACU❋DEP™, VARI❋IMAGE™, VARI❋BEAM™, and the Vari-Lite Asterisk are also trademarks
owned by Vari-Lite, Inc.
VARI❋LITE® products are protected by one or more of the following patents, and other pending patent applications worldwide:
U. S. Patents No. 6,123,436; 6,113,252; 6,046,861; 6,031,749; 6,011,640; 5,969,868; 5,959,768; 5,934,794; 5,882,107; 5,829,868;
5,825,548; 5,798,619; 5,774,273; 5,769,527; 5,758,956; 5,728,994; 5,640,061; 5,590,954; 5,454,477; 5,432,691; 5,367,444;
5,329,431; 5,307,295; 5,282,121; 5,278,742; 5,209,560; 5,186,536; 5,073,847; 5,010,459; 4,980,806; 4,972,306; 4,800,474;
4,779,176; 4,701,833; 4,602,321;
U. S. Design Patents No. 439,356; 420,332; 417,300; 415,301; 413,995; 377,338; 366,712; 359,574; 350,408; 347,113;
Australia Patents No. 693,691; 683,695; 667,109; 649,264; 646,588; 586,095; 576,400; 546,433;
Australia Design Patents No. 128,796; 128,795;
Canada Patents No. 2,070,670; 2,050,375; 1,270,675; 1,259,058; 1,181,795;
Canada Design Patents No. 81,234; 81,233; 76,046;
European (UK) Patents No. 0 652 400; 0 586 049; 0 565 218; 0 547 732; 0 534 710; 0 495 305; 0 474 202; 0 379 970; 0 253 082;
0 253 081; 0 248 974; 0 192 882; 0 140 994; 0 060 068;
Germany Patents No. 694 25 943.8; 693 14 122.0; 692 08 615.3; 692 07 692.1; 691 31 478.0; 691 21 029.2; 690 33 385.4; 37 89
166.9; 37 68 727.1; 37 51 804.6; 37 50 201.8; 35 87 270.5; 32 79 888.1; 32 74 291.6;
Germany Design Patents No. M 98 01 745.4; M 96 04 515.9; M 96 04 514.0; M 94 07 689.8; M 94 02 951.2; M 499 03 583.6; M
498 11 203.9; G 93 12 884.3;
Spain Patents No. 2 090 191; 2 084 289; 2 020 960; 0 548 328;
Spain Utility Model Patent No. 2.031.748;
Spain Design Patents No. 0.137.502; 0.137.501; 0.133.573;
Greece Patent No. 910.400.544;
Hong Kong Patents No. 965/1990; 285/1987;
Japan Patents No. 2,843,696; 2,059,669; 2,055,324; 2,002,168; 1,966,525; 1,889,481; 1,792,721; 1,770,241; 1,723,825;
1,683,007; 1,533,011;
Japan Design Patents No. 985,985-1; 985,985; 947,552; 945,436-1; 945,436; 1,106,089; 1,077,598; 1,072,598; 1,060,414;
1,002,123;
Korea Patents No. 76,310; 42,639; 283,770; 181,180;
Korea Design Patents No. 209,896; 209,895;
Mexico Patent No. 180,148;
Singapore Patents No. 663/90; 134/87;
Taiwan Patents No. 78,726; 66,975; 65,380; 28,275;
United Kingdom Design Registrations No. 2082526; 2072562; 2056387; 2056386; 2042174; 2038212; 2033108; 2029499.
Apple®, Macintosh®, and FireWire® are registered trademarks of Apple Computer, Inc.
Zip® is a registered trademark of Iomega® Corporation.
All other brand or product names which may be mentioned in this manual are trademarks or registered trademarks of their
respective companies or organizations.
VL2000™ Spot Luminaire Service Manual
The information furnished in this manual is for informational use only and is subject to change without notice. Vari-Lite, Inc.
assumes no responsibility or liability for any errors or inaccuracies that may appear in this manual. All information and graphic
representations are propertyofVari-Lite10911PetalStreet,Dallas, Texas 75238 USA.
Version as of: 24-March-2004
Part number: 02.9673.0010 D
VL2000™ Spot Luminaire Service Manual
©2001-2004 Genlyte Thmoas Group LLC. All Rights Reserved.

F OREWORD
02.9673.0010 D 24-March-2004 iii
How To Obtain Warranty Service
A copy of the Vari-Lite, Inc. Limited Warranty was included in the shipping package
for this VARI❋LITE® product.
To obtain warranty service, please contact customer service at 1-877-VARI-LITE
(1-877-827-4548) or [e-mail] and request a Return Material
Authorization (RMA) for warranty service. You need to provide the model and serial
number of the item being returned, a description of the problem or failure and the
name of the registered user or organization. If available, you should have your sales
invoice to establish the date of sale as the beginning of the warranty period.
Once you obtain the RMA, pack the product in its original packing material along with
a copy of your invoice (if available) and write the RMA number legibly on or near the
shipping address label. Return the unit, freight prepaid to:
Vari-Lite
10911 Petal Street
Dallas, Texas 75238
Attention: Warranty Service
As stated in the warranty, it is required that the shipment be insured and FOB our
service center.
Confidential Property Disclosure
This technical manual is confidential property of Vari-Lite. All information contained
herein is the sole and exclusive property of Vari-Lite. and may not be used, disclosed,
or reproduced in any manner without the prior written consent of Vari-Lite. The infor-
mation furnished in this manual is for informational use only and is subject to change
without notice. Vari-Lite. assumes no responsibility or liability for any errors or inac-
curacies that may appear in this manual.

VARI❋LITE® - VL2000™ S POT L UMINAIRE S ERVICE M ANUAL
iv 24-March-2004 02.9673.0010 D
Compliance Notice
This equipment has been tested and found to comply with the limits for a Class A
digital device pursuant to Part 15 of FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when this equipment is operated in
a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with Vari-Lite system,
service, and safety guidelines, may cause harmful interference to radio communica-
tions. Operation of this equipment in a residential area is likely to cause harmful inter-
ference, in which case the user will be required to correct the interference at his/her
own expense.
Declaration of Conformity
We declare, under our sole responsibility, that this product complies with the relevant
clauses of the following standards and harmonized documents:
Safety
EN 60950: 1999 Safety Standard for Information Technology Equipment
EMC
EN55022A: 1998 Radiated and Conducted Emissions
EN50082-1: 1997 Generic Immunity Standard
We certify that VARI❋LITE products conform to the protection requirements of
European council directives: 73/23/EEC (LVD) and 89/336/EEC (EMC)
Manual Revision History
FCC
PAGE NUMBER CHANGE NUMBER
Title Page - xiv D
1 - 186 D
VERSION DATE
BASIC 23-Feb-01
Rev A 09-Oct-01
Rev B 23-May-02
Rev C 07-Oct-02
Rev D 24-Mar-04

F OREWORD
02.9673.0010 D 24-March-2004 v
Safety Notice
It is extremely important to read ALL safety information and instructions provided in
this manual and any accompanying documentation before installing and operating the
products described herein. Heed all cautions and warnings during installation and use
of this product.
Safety symbols used throughout this manual are as follows:
GENERAL INFORMATION PERTAINING TO PROTECTION AGAINST ELEC-
TRICAL SHOCK, FIRE, EXPOSURE TO EXCESSIVE UV RADIATION, AND
INJURY TO PERSONS CAN BE FOUND BELOW.
WARNING:
INSTRUCTIONS FOR CONTINUED PROTECTION AGAINST FIRE
1. VARI❋LITE® luminaires have been designed for use only with certain Philips and Osram
HID lamps. Note lamp type (MSR400, MSR575HR etc.) before replacing lamps.
Installing another type of lamp may be hazardous.
2. Luminaires may be mounted on any type of surface as long as mounting instructions are
followed. See instructions detailed in this manual.
3. Replace fuses with same type and rating only.
4. Note distance requirement from combustible materials or illuminated objects for
VARI❋LITE® luminaires.
WARNING:
INSTRUCTIONS FOR CONTINUED PROTECTION AGAINST ELECTRICAL
SHOCK
1. VARI❋LITE® luminaires are designed for dry locations only. Exposure to rain or
moisture may damage luminaire.
2. Disconnect power before servicing any VARI❋LITE® equipment.
3. Servicing to be performed by qualified personnel only.
CAUTION advising of potential damage to product.
WARNING advising of potential injury or death to persons.

VARI❋LITE® - VL2000™ S POT L UMINAIRE S ERVICE M ANUAL
vi 24-March-2004 02.9673.0010 D
WARNING:
INSTRUCTIONS FOR CONTINUED PROTECTION AGAINST EXCESSIVE
EXPOSURE TO UV RADIATION
1. Many VARI❋LITE® luminaires use an HID type lamp that produces UV radiation. DO
NOT look directly at lamp.
2. It is hazardous to operate luminaires without lens or shield. Shields, lenses, or ultraviolet
screens shall be changed if they have become visibly damaged to such an extent that their
effectiveness is impaired. For example, by cracks or deep scratches.
WARNING:
INSTRUCTIONS FOR PROTECTION AGAINST INJURY TO PERSONS
1. Exterior surfaces of the luminaire will be hot during operation. Use appropriate safety
equipment (gloves, eye protection, etc.) when handling and adjusting hot equipment and
components.
2. Luminaires will have a hot lamp when operating. Disconnect power and allow lamp to
cool before replacing.
3. Arc lamps emit ultraviolet radiation which can cause serious skin burn and eye
inflammation. Additionally, arc lamps operate under high pressure at very high
temperatures. Should the lamp break, there can exist a danger of personal injury and/or
fire from broken lamp particles being discharged.
4. Wear eye protection when relamping.
5. Appropriate safety equipment (gloves, eye protection) should be used when handling
damaged lamps.
6. If lamp is touched with bare hands, clean lamp with denatured alcohol and wipe with
lint-free cloth before installing or powering up the luminaire.
7. The lamp shall be changed if it has become damaged or thermally deformed.
WARNING:
RF INTERFERENCE
1. This is a Class A product. In a domestic environment this product may cause radio
interference, in which case, the user may be required to take adequate measures.
ARC LAMP CHARACTERISTIC CONSIDERATIONS
1. Arc lamps require a period of time to relight after a power interruption or a severe voltage
dip. In some cases, lamp will automatically relight after it has cooled depending on Lamp
Power-Up State (L ON/ LOFF) system configuration setting.
2. Burning position is Universal.

F OREWORD
02.9673.0010 D 24-March-2004 vii
Sicherheitshinweise
Es ist äußerst wichtig, ALLE Sicherheitsinformationen und -hinweise in diesem
Handbuch und dem beiliegenden Informationsmaterial zu lesen, bevor Sie die hierin
beschriebenen Produkte installieren bzw. bedienen. Halten Sie bei der Installation und
dem Einsatz dieses Produkts alle Warnhinweise und Vorsichtsmaßnahmen ein.
Folgende Sicherheitssymbole werden in diesem Handbuch verwendet:
NACHSTEHEND FINDEN SIE ALLGEMEINE HINWEISE ÜBER SICHER-
HEITSVORKEHRUNGEN GEGEN ELEKTROSCHOCK, FEUER, ÜBERHÖHTE
UV-STRAHLUNG UND KÖRPERVERLETZUNGEN.
WARNUNG:
HINWEISE ZUM FEUERSCHUTZ
1. VARI❋LITE®-Scheinwerfer sind ausschließlich für den Einsatz mit bestimmten Philips
und Osram HID-Lampen geeignet. Achten Sie auf den Lampentyp (MSR400,
MSR575HR etc.), bevor Sie die jeweiligen Lampen ersetzen. Die Installation eines
anderen Lampentyps kann gefährlich sein.
2. Scheinwerfer können auf jeder beliebigen Oberfläche montiert werden, solange Sie die
Montageanweisungen befolgen. Detaillierte Hinweise finden Sie in diesem Handbuch.
3. Ersetzen Sie Sicherungen nur mit Sicherungen vom gleichen Typ und gleicher Stärke.
4. Beachten Sie die Einhaltung des erforderlichen Sicherheitsabstandes der
VARI❋LITE®-Scheinwerfer von brennbarem Material oder beleuchteten Objekten.
WARNUNG:
HINWEISE ZUM SCHUTZ GEGEN ELEKTROSCHOCK
1. VARI❋LITE®-Scheinwerfer eignen sich ausschließlich für trockene Standorte. Regen
oder Feuchtigkeit können die Scheinwerfer beschädigen.
2. Unterbrechen Sie die Stromzufuhr, bevor Sie mit der Arbeit an VARI❋LITE®-Geräten
beginnen.
3. Die Geräte sollten nur von qualifiziertem Personal gewartet werden.
WARNUNG:
HINWEISE ZUM SCHUTZ GEGEN ÜBERHÖHTE UV-STRAHLUNG
1. Viele VARI❋LITE®-Scheinwerfer verwenden einen HID-Lampentyp, der UV-Strahlen
abgibt. SCHAUEN SIE NICHT direkt in die Lampe.
VORSICHT - weist auf möglichen Produktschaden hin.
WARNUNG - weist auf mögliche Körperverletzung und
Lebensbedrohung hin.

VARI❋LITE® - VL2000™ S POT L UMINAIRE S ERVICE M ANUAL
viii 24-March-2004 02.9673.0010 D
2. Es ist gefährlich, Leuchten ohne Linsen oder Blenden zu bedienen. Blenden, Linsen oder
Ultraviolettschirme müssen ausgetauscht werden, sofern deren Schutzwirkung durch
sichtbare Beschädigung (z. B. Sprünge oder Schrammen) eingeschränkt ist.
WARNUNG:
HINWEISE ZUM SCHUTZ GEGEN KÖRPERVERLETZUNGEN
1. Bei Betrieb sind die Außenflächen der Scheinwerfer heiß. Verwenden Sie bei der
Bedienung von aufgeheizter Apparatur die jeweils geeignete Sicherheitsausrüstung
(Handschuhe, Augenschutz etc.).
2. Bei Betrieb der Scheinwerfer ist die Lampe heiß. Unterbrechen Sie die Stromzufuhr und
lassen Sie die Lampe abkühlen, wenn Sie diese austauschen.
3. Bogenlampen senden ultraviolette Strahlen aus, die Hautverbrennungen und
Augenentzündungen verursachen können. Der Betrieb von Bogenlampen erfolgt unter
Hochdruck und bei hohen Temperaturen. Sollte die Lampe zerbrechen, besteht die Gefahr
von Körperverletzung bzw. von Feuer, das von Lampenteilen ausgelöst werden kann.
4. Tragen Sie beim Austausch der Lampen einen Augenschutz.
5. Die geeignete Sicherheitsausrüstung (Handschuhe, Augenschutz) sollte beim Umgang mit
beschädigten Lampen verwendet werden.
6. Wenn die Lampe mit bloßen Händen berührt wird, reinigen Sie sie mit denaturiertem
Alkohol und einem flusenfreien Tuch, bevor Sie die Scheinwerfer installieren oder in
Betrieb nehmen.
7. Wenn die Lampe beschädigt oder durch Hitzeeinwirkung deformiert ist, muß diese
ausgetauscht werden.
WARNUNG:
HF-INTERFERENZ
1. Es handelt sich um ein Produkt der Klasse A. In einer Wohnumgebung kann das Produkt
Hochfrequenzstörungen verursachen. In diesem Fall müssen eventuell geeignete
Maßnahmen getroffen werden.
BESONDERHEITEN VON BOGENLAMPEN
1. Bogenlampen benötigen eine gewisse Zeitdauer, um nach einem Stromausfall oder einem
Spannungsgefälle wieder aufzuleuchten. In einigen Fällen wird die Lampe nach
Abkühlung automatisch wieder aufleuchten, je nach der Systemkonfigurationseinstellung
des Lampeneinschaltungsstatus (L ON/ LOFF).
2. Die Brennposition ist Universal.

F OREWORD
02.9673.0010 D 24-March-2004 ix
Notes de sécurité
Avant de procéder à l’installation des produits décrits dans ce guide et de les mettre en
marche, il est extrêmement important de lire TOUS les renseignements et TOUTES
les directives de sécurité contenues dans ce guide ainsi que toute documentation jointe.
Tenir compte de tous les avertissements et suivre toutes les précautions pendant
l’installation et l’utilisation de cet appareil.
Les symboles de sécurité utilisés dans ce guide sont les suivants :
CETTE SECTION CONTIENT DES INFORMATIONS GÉNÉRALES POUR SE
PROTÉGER CONTRE LES DÉCHARGES ÉLECTRIQUES , LES INCENDIES,
L’EXPOSITION EXCESSIVE AUX RAYONS UV ET TOUT AUTRE ACCIDENT
POUVANT ENTRAÎNER DES BLESSURES.
AVERTISSEMENT:
DIRECTIVES POUR SE PROTÉGER CONTRE LES INCENDIES
1. Les luminaires VARI❋LITE® ont été conçus pour être utilisés uniquement avec certaines
lampes Philips et Osram HID. Vérifier le type de lampe (MSR400, MSR575HR etc.)
avant de remplacer les lampes. L’installation d’un autre type de lampe peut poser un
danger.
2. Les luminaires peuvent être fixés sur tout type de surface tant que les directives de
montage sont respectées. Voir les explications détaillées dans ce guide.
3. Ne remplacer les fusibles qu’avec ceux du même type, ayant les mêmes caractéristiques.
4. Vérifier la distance à respecter entre les matériaux combustibles ou les objets illuminés et
les luminaires VARI❋LITE®.
AVERTISSEMENT:
DIRECTIVES POUR SE PROTÉGER CONTRE LES DÉCHARGES ÉLECTRIQUES
1. Les luminaires VARI❋LITE® sont conçus pour une utilisation au sec uniquement. Une
exposition à la pluie et à l’humidité risque d’endommager le luminaire.
2. Débrancher l’appareil avant de procéder à la révision de tout matériel VARI❋LITE®.
3. Les révisions doivent être effectuées uniquement par des personnes qualifiées.
ATTENTION Ce symbole annonce que l’appareil risque
d’être endommagé.
AVERTISSEMENT Ce symbole annonce qu’il y a risque
d’accident grave ou même fatal.

VARI❋LITE® - VL2000™ S POT L UMINAIRE S ERVICE M ANUAL
x 24-March-2004 02.9673.0010 D
AVERTISSEMENT:
DIRECTIVES POUR SE PROTÉGER CONTRE UNE EXPOSITION EXCESSIVE
AUX RAYONS UV
1. Plusieurs luminaires VARI❋LITE® utilisent une lampe de type HID qui produit des
rayons UV. NE PAS fixer son regard sur la lampe.
2. L’utilisation des luminaires sans lentille ou blindage pose des risques. Tous blindages,
lentilles ou écrans ultraviolet visiblement endommagés au point que leur efficacité en est
affectée doivent être remplacés, par exemple s’il y a des fissures ou de profondes rayures.
AVERTISSEMENT:
DIRECTIVES POUR SE PROTÉGER CONTRE LES ACCIDENTS POUVANT
ENTRAÎNER DES BLESSURES
1. Les surfaces externes du luminaire deviennent brûlantes quand l’appareil est en marche.
Pour manœuvrer ou ajuster des appareils brûlants et leurs composants, se protéger
suffisamment (gants, protection pour les yeux, etc.).
2. La lampe du luminaire est brûlante lorqu’il est en marche. Débrancher le courant et
attendre que la lampe ait refroidi avant de la remplacer.
3. Les lampes à arc émettent des rayons ultraviolets pouvant causer de graves brûlures sur la
peau et une inflammation des yeux. De plus, les lampes à arc fonctionnent sous haute
tension à de très hautes températures. Si la lampe se casse, les particules de la lampe
cassée peuvent causer blessures et/ou incendie en s’éparpillant.
4. Se protéger les yeux pour remplacer la lampe.
5. Utiliser des appareils de protection appropriés (gants, protection des yeux) pour manier
des lampes endommagées.
6. Si la lampe a été touchée avec des mains nues, la nettoyer avec de l’alcool dénaturé et
l’essuyer avec un chiffon non-pelucheux avant d’installer ou de brancher le luminaire.
7. Si la lampe a été endommagée ou a reçu une déformation thermique, elle doit être
remplacée.
AVERTISSEMENT:
INTERFÉRENCE RF
1. Cet appareil est de Classe A. Dans un environnement domestique, cet appareil peut causer
des interférences radio, et si c’est le cas, l’utilisateur peut avoir à prendre des mesures
adéquates.
CONSIDÉRATIONS DES CARACTÉRISTIQUES DE LAMPES À ARC
1. Après une interruption de courant ou une baisse importante de voltage, les lampes à arc
mettent du temps avant de se rallumer. Dans certains cas, la lampe se rallumera
automatiquemet après s’être refroidie. Cela dépend de la manière dont le système est réglé
pour le statut de mise en marche de la lampe (L ON/ LOFF).
2. La position Brûler est Universelle.

F OREWORD
02.9673.0010 D 24-March-2004 xi
Aviso sobre Seguridad
Es muy importante leer TODA la información e instrucciones sobre seguridad que se
indica en este manual así como en los documentos adjuntos antes de instalar y operar
los productos descritos. Se debe prestar atención a todos los avisos y advertencias
durante la instalación y uso de este producto.
Los símbolos de seguridad usados en este manual son los siguientes:
LA INFORMACIÓN GENERAL RELACIONADA A LA PROTECCIÓN CON-
TRAGOLPES DE CORRIENTE ELÉCTRICA, INCENDIO, EXPOSICIÓN
EXCESIVA A RADIACIÓN ULTRA VIOLETA Y LESIONES A LAS PERSONAS
SE PUEDE ENCONTRAR SEGUIDAMENTE:
ADVERTENCIA:
INSTRUCCIONES PARA PROTECCIÓN CONTINUA CONTRA INCENDIO
1. Las luminarias VARI❋LITE® han sido diseñadas para ser usadas solamente con algunas
lámparas HID Philips y Osram. Tome nota del tipo de lámpara (MSR400, MSR575HR
etc.) antes de reemplazarla. Instalación de otro tipo de lámpara puede ser peligroso.
2. Las luminarias se pueden instalar en cualquier tipo de superficie siempre que se sigan las
instrucciones de instalación. Vea las instrucciones detalladas en este manual.
3. Reemplaze los fusibles solamente con los del mismo tipo y especificación.
4. Tome nota de los requerimientos de distancia de materiales combustibles u objetos
iluminados para las luminarias VARI❋LITE®.
ADVERTENCIA:
INSTRUCCIONES PARA PROTECCIÓN CONTINUA CONTRA CHOQUE
ELÉCTRICO
1. Las luminarias VARI❋LITE® están diseñadas solamente para lugares secos. La
exposición a la lluvia o humedad pueden dañar la luminaria.
2. Desconecte la energía antes de dar servicio a cualquier equipo de VARI❋LITE®.
3. El servicio debe ser realizado solamente por personal calificado.
CUIDADO,indica posibles daños al producto.
ADVERTENCIA, indica posibles lesiones o muerte a las
personas.

VARI❋LITE® - VL2000™ S POT L UMINAIRE S ERVICE M ANUAL
xii 24-March-2004 02.9673.0010 D
ADVERTENCIA:
INSTRUCCIONES PARA PROTECCIÓN CONTINUA CONTRA LA EXPOSICIÓN
EXCESIVA DE RADIACIÓN ULTRA VIOLETA
1. Muchas luminarias VARI❋LITE® usan un tipo de lámpara HID que produce radiación
UV. NO mire directamente a la lámpara.
2. Es peligroso operar luminarias sin lentes o protectores. Debe cambiar los protectores,
lentes o pantallas ultravioletas si se aprecia que han sido dañadas, y que su efectividad
pudiera estar deteriorada. Por ejemplo, si tuvieran rajaduras o raspaduras profundas.
ADVERTENCIA:
INSTRUCCIONES PARA PROTECCIÓN CONTRA LESIONES DE PERSONAS
1. Las superficies exteriores de las luminarias están calientes durante su operación. Use un
equipo de seguridad apropiado (guantes, protección para los ojos, etc.) cuando haga
ajustes en el equipo y componentes que están calientes.
2. Cuando las luminarias están en operación la lámpara estará muy caliente. Desconecte la
energía y deje que la lámpara se enfríe antes de reemplazarla.
3. Las lámparas de arco emiten radiaciones ultravioletas que pueden ocasionar serias
quemaduras a la piel e inflamación a los ojos. Además, las lámparas de arco operan a alta
presión y muy alta temperatura. Si la lámpara se rompe, puede existir el peligro de
lesiones al personal o un incendio ocasionado por las partículas de la lámpara rota que se
caen.
4. Use protección para los ojos cuando vuelve a colocar una lámpara nueva.
5. Use un equipo de seguridad apropiado (guantes, protección para los ojos, etc.) cuando
trabaje con lámparas dañadas.
6. Si toca la lámpara con las manos, limpie la lámpara con alcohol desnaturalizado y con tela
sin pelusas antes de instalar o volver a conectar la luminaria.
7. Cambie la lámpara si está dañada o deformada termicamente.
ADVERTENCIA:
INTERFERENCIA RF
1. Este es un producto de Clase A. En el ambiente de la casa este producto puede ocasionar
radiointerferencia, en cuyo caso, el usuario debe tomar las medidas adecuadas.
CONSIDERACIONES SOBRE LAS CARACTERÍSTICAS DE LA LÁMPARA DE
ARCO
1. Las lámparas de arco requieren un período de tiempo para volver a iluminarse después de
una interrupción de energía o de una severa caída de voltaje. En algunos casos, la lámpara
se volverá a iluminar en forma automática después que se ha enfriado dependiendo de la
configuración del sistema de energía de la lámpara (L ON / L OFF) (L encendida / L
apagada).
2. La posición de encendido es universal.

S AFETY N OTICE (J APANESE )
02.9673.0010 D 24-March-2004 xiii
_ K H æ 2 Ô  0 ç 2 Ä
ÎÎæ  ¿ Ð  á¿  ~     Ò Á  ' êùÕ Ä Q>X^ Å  î 
û é Q>X^ é _ K H æ P Ô  ±  ã [ ÿ  ÔôáÅ \ úÊÛпù
Ú s Ù æ Ä ~      ÌÚ  ö ª Ô  Ù æêÔôáé 0 ç P Ä Å 
î  T æ Ð ç Òá Þ : ÒáÊÛп
Ä Q>X^ âê  é _ K Qo" ö ª Òá¿ùÔ
õ   +4  UV | ¿ æ » Ô   é : ´ Å  î q  P    ËÚüé
û N  å ±  æß¿áê  é [ ÿ  Å \ úÊÛп

6
:
+4 é \ ¢  Z ËÚüé Ef;
1. VARI❋LITE®
 ÿ z U ê
Philips
Å  î
Osram
é
HID
\fJ ö ª Ô  Áæ
3 Ð  á¿ùÔ \fJ d µ Ô  Ù ê \fJ é ³  Ô
MSR400

MSR575HR
åä Õ  Õ z Ô  ÁæÒáÊÛп  é ³  é \fJ  
 Ì  ã Â ¾ âÔ
  ÿ z U ê Ä Q>X^ é 0  æ å Þá 2 Þ Ô  ÆÉ  äé  Áå 2
J é + Y æâý    Ì  ÎãÇâÈùÔ f ¦ æß¿áê Ä Q>X^
 ó  ÒáÊÛп
 EXo- d µ Ô   ' ê + Ó EXo- Ô + Ó ³   + Ó "\, Õ  ö ª
ÒáÊÛп
4. VARI❋LITE®
 ÿ z U ê  » 0  ° ùÚê  é 6 . Æ   Ð å   ÛÌ 
Òá 
Î
ÒáÊÛп

6
:
õ   Z ËÚüé Ef;
1. VARI❋LITE®
 ÿ z U ê G Î ÒÚ c º â ö ª Ô  Áæ 3 Ð  á¿ù
Ô  â è   ² ÿ ( Ç é  ¿  ² æ    Ì  ã  ÿ z U Ç Í Îã
ǽ  ùÔ
2. VARI❋LITE®
 ÿ z U  C  P  Ô   ' ê  Õ 5 æ  .  ¾ ÞáÊÛÐ
¿
  ÿ z U é C  P  ê  F  , ß Û ç éúÇ  Á  ÁæÒáÊÛп
0 ç  ~  æ Ê Í   à   ¾ H ǽ  ùÔ
 6  q  P  æßåÇ   ¾ H ǽ  ùÔ

VARI❋LITE® - VL2000™ S POT L UMINAIRE S ERVICE M ANUAL
xiv 24-March-2004 02.9673.0010 D

6
:
 é
UV
| ¿ æÐ  Ð  å¿Úüé Ef;
1. VARI❋LITE®
 ÿ z U é  Êê
UV
| ¿  ¢ Õ 
HID
2J é \fJ ö ª
Òá¿ùÔ \fJ å Þ Ô  Îãê ± ÌáÊÛп
 _f- ùÚê *o^< ö  Õæ  ÿ z U  P. Ô  ã Â ¾ âÔ _f- 
*o^<  ¡  " ¹ Y êíî   ÿ Ó ¿  ÞÆÈ Í åäæ  Øé 2
Ç Ê å  ÁæåÞÚ    § Ã  ÁæÒùÔ

6
:
G  2   Z ËÚüé Ef;
  ÿ z U Ç P. Òá¿  ãÈêØé  ¥ Ç ² Êå  ùÔ ² ÊåÞÚ z U
ÿ &fPo@f;   Ò Á Ù æê ¡ ¾ å  U Ô » < ÿ ;  ª  Ü Õ  ö
ª ÒáÊÛп
  ÿ z U Ç P. Òá¿  ãÈêØé \fJ Ç ² Êå  ùÔ \fJ d µ
Ô   ' ê  ÿ z U é  .  ¾   \fJ é ÷ 2 Ç  Ç  ùâ Ù ÞáÊÛ
п \fJ é
c
ñÚ  Ì  ã ¤ ¿ ,64 Ç Û ¿á \fJ é  . Ç
¾   ' Ç  ùÔ
 o" . ê ¡  "  | ¿ ÒùÔÎé ¡  " æ  Þáíä¿ + Í  v ÞÚ
  á é ;   à ÎÔÎãÇ  ùÔÐ  æ o" . ê  ö  ÷ é )
 â 6   ÒùÔØéÚü  û o" . Ç _ Ê Ô  ã  î  ÞÚ _ 
â q  P  ÿ +4 Ç  ¢ Ô  Â ¾ 0 Ç  ùÔ
 c P. Ô  ãÈæê ;  ª  Ü   ª ÒáÊÛп
 Ê Í ÒÚ \fJ   Ò Á  ' ê ¡ ¾ å  U Ô » < ÿ ;  ª  Ü Õ   ª
ÒáÊÛп
 » <   ª ÖÕæ å  » â \fJ  ÞÚ  ' ê  0 ^&o^ ö Þá
\fJ È  ¿æÒ { ÊÕé ´ å¿ Ó â  ¿áÆ   ÿ z U     Ì
 .  I  ÁæÒùÔ
 Í Çß¿Ú \fJ ÿ ² æ  Þá  » ÒÚ \fJ ê   § ÃáÊÛп

6
:
RF
 ä
1.
Ä
~
 ê
Class A
æ ½  Ð  ùÔ Ä
~
 ê  8 c º æÅ¿á u "  ä  à
ÎÔ  » 0 Ç  ùÔØé  '  ö ª * ê ¡ ¾ å £
Î
   åÌ  ëå 
å¿ÎãÇ  ùÔ
o" . é  0
1.
  ß ùÚê " Èå  ö :6J ß æ o" .  c P. Ô   ' êÒë 
Ê ( F  ÅÊ  ÁæÒáÊÛп
Lamp Power-Up State
Ô
L ON/ L OFF
Õ *
,9S ! o æ  Þáê ÷ 2 Ç  ÇÞÚãÈæ , G  æ c P. Ð   ' ý
 ùÔ
 o" . ê P 6 . âÔ

T ABLE OF C ONTENTS
02.9673.0010 D 24-March-2004 xv
Table of Contents
About This Manual...................................................................................................... 1
Additional Documentation........................................................................................... 1
Customer Service......................................................................................................... 2
Technical Bulletins and Notices............................................................................ 2
Chapter 1. Description
Features
Overview...................................................................................................................... 4
Standard Features.................................................................................................. 4
Specific Features ................................................................................................... 4
Major Components
External Components................................................................................................... 5
Menu Display........................................................................................................ 6
LED Indicators...................................................................................................... 6
Head Components........................................................................................................ 7
Yoke Components........................................................................................................ 8
Enclosure Components ................................................................................................ 9
Principles of Operation
Power and Data Flow Diagram.................................................................................. 10
Chapter 2. Maintenance
Testing
Testing Software ........................................................................................................ 12
Special Considerations
Configuring Main Controller Board .......................................................................... 13
Jumper Configuration.......................................................................................... 14
Maintenance Procedures
Head Assembly.......................................................................................................... 15
Lamp Replacement.............................................................................................. 15
Align Lamp for Peaked or Flat Field................................................................... 16
Color/Gobo/Link Iris Bulkhead Replacement..................................................... 18
Standard Gobo/Color Filter Replacement........................................................... 19
Dimmer Bulkhead Replacement ......................................................................... 21
Front Assembly Removal.................................................................................... 22
Rotating Gobo Sensor PCB Replacement........................................................... 23
Edge Motor Assembly Replacement................................................................... 25
Lens Barrel Assembly Replacement ................................................................... 28
Yoke Assembly .......................................................................................................... 30
Tilt Motor Assembly Replacement ..................................................................... 30
Auxiliary Controller PCB Replacement.............................................................. 31
Ignitor PCB Replacement.................................................................................... 33
Enclosure Assembly................................................................................................... 35
Removing Enclosure Covers............................................................................... 35

VARI❋LITE® - VL2000™ S POT L UMINAIRE S ERVICE M ANUAL
xvi 24-March-2004 02.9673.0010 D
Power Supply Replacement - Old Style............................................................... 37
Power Supply Replacement - New Style............................................................. 38
Ballast Module Assembly Replacement.............................................................. 39
Pan Motor Assembly Removal............................................................................ 41
Main Controller PCB Replacement..................................................................... 42
DMX Input PCB Replacement ............................................................................ 43
Chapter 3. Illustrated Parts Breakdown
Drawing Tree
VL2000 Series Spot Luminaire.................................................................................. 46
Top Assembly
Included Items Kit...................................................................................................... 48
Top Assembly
VL2000 Series Spot Luminaires ................................................................................ 49
Head
Head Assembly........................................................................................................... 51
Front Assembly .......................................................................................................... 53
Lens Barrel Assembly ................................................................................................ 56
Sub-Barrel Group 1 Assembly ................................................................................... 58
Sub-Barrel Group 2 Assembly ................................................................................... 59
Sub-Barrel Group 3 Assembly ................................................................................... 60
Motor Zoom Optics Assembly................................................................................... 61
Rotating Gobo Wheel Assembly................................................................................ 62
Sensor Rotating Gobo PCB Assembly....................................................................... 64
Rear Assembly............................................................................................................ 65
Tilt Pulley/Bearing Assembly .................................................................................... 67
Tilt Bearing Housing Assembly................................................................................. 68
Reflector Assembly.................................................................................................... 69
Back Cap Assembly ................................................................................................... 70
Fan Cover Assembly - VL2201.................................................................................. 72
Fan Cover Assembly - VL2000 Spot......................................................................... 74
Color/Gobo/Link Iris Bulkhead Assembly................................................................. 76
Iris/Gobo Motor Assembly......................................................................................... 78
Sensor PCB Assembly................................................................................................ 79
Color Motor Assembly............................................................................................... 80
Gobo Wheel Assembly............................................................................................... 81
Filter Wheel Assembly............................................................................................... 82
Dimmer Bulkhead Assembly ..................................................................................... 83
Dimmer Bulkhead Assembly ..................................................................................... 85
UV Dimmer Heatshield Assembly............................................................................. 87
Optical Sensor Assembly ........................................................................................... 88
Yoke
Yoke Assembly........................................................................................................... 89
Counterweight Assembly ........................................................................................... 91
Ignitor PCB Assembly................................................................................................ 92
Aux Controller PCB Assembly.................................................................................. 93
Tilt Motor Assembly .................................................................................................. 96

T ABLE OF C ONTENTS
02.9673.0010 D 24-March-2004 xvii
Pan/Tilt Encoder PCB Assembly............................................................................... 98
Enclosure
Top Upper Enclosure Assembly ................................................................................ 99
Connector Panel Assembly...................................................................................... 104
Main Controller 3-Phase PCB Assembly ................................................................ 105
DMX Input PCB Assembly..................................................................................... 108
Pan Tube Assembly ................................................................................................. 109
Pan Motor Assembly................................................................................................ 111
Ballast Module (Arc Power Supply) Assy............................................................... 113
400/625W Ballast Board PCB Assembly................................................................ 117
700W Ballast Board PCB Assembly....................................................................... 121
400/625W Ballast Rider Board PCB Assembly ...................................................... 125
700W Ballast Rider Board PCB Assembly ............................................................. 128
Cables
Ground Strap Cable Assembly................................................................................. 131
AC Input Pigtail (Euro) Cable Assembly ................................................................ 132
AC Input Link Cable Assembly............................................................................... 133
AC Input Splitter Cable Assembly .......................................................................... 134
LVS Chassis Ground Cable Assembly..................................................................... 135
Main To Aux/Data & Power Cable Assembly......................................................... 136
Pan/Tilt Control Cable Assembly............................................................................ 137
Lamp Supply Control Cable Assembly 139
Chassis To Yoke Ground Cable Assembly .............................................................. 140
Lamp Supply OT/NOT On Cable Assembly 141
Data I/O Link Cable Assembly................................................................................ 142
DC Output Cable Assembly 143
Lamp Supply Harness Cable Assembly................................................................... 144
Motor Harness Cable Assembly .............................................................................. 145
Yoke To Head Ground Cable Assembly.................................................................. 147
Lamp Supply To Relay Cable Assembly................................................................. 148
Ignitor To Relay Cable Assembly............................................................................ 149
Head OT Switch #2 Cable Assembly ...................................................................... 150
DC Output XPiQ Cable Assembly .......................................................................... 151
Appendix A. Technical Bulletins 153
VL2000 Spot Luminaire Technical Bulletins.......................................................... 153
VL2000 Luminaire Wire Diagram (Sheet 1)........................................................... 155
VL2000 Luminaire Wire Diagram (Sheet 2)........................................................... 156
400W/625W/700W Ballast Schematic.................................................................... 157
Ballast Rider Schematic........................................................................................... 159
Auxiliary Controller Schematic............................................................................... 160
Main Controller Schematic...................................................................................... 163
DMX Input Schematic............................................................................................. 167
Ignitor Schematic..................................................................................................... 168

VARI❋LITE® - VL2000™ S POT L UMINAIRE S ERVICE M ANUAL
xviii 24-March-2004 02.9673.0010 D

I NTRODUCTION
02.9673.0010 D 24-March-2004 1
Introduction
About This Manual
This manual provides descriptions, repair procedures, and illustrated parts breakdowns
for all configurations of the VL2000™ Spot Luminaire. The manual is intended for
use by Vari-Lite personnel and by Vari-Lite’s customers/clients.
WARNING: It is important to read ALL accompanying safety and installation
instructions to avoid damage to the product and potential injury to yourself or others.
This manual covers the following models:
* Formerly known as the VL2202™ spot luminaire.
Note: Performing maintenance procedures contained in this manual may void the
product warranty. Refer to the Vari-Lite, Inc. Limited Warranty card included in the
shipping package for this VARI❋LITE® product.
Additional Documentation
A support webpage for VL2000 series luminaires is available at www.vari-lite.com
(follow the Support link).
A users manual is available for installation and operation of the VL2000 wash
luminaire. This manual is available in both printed and electronic (PDF) formats.
■VL2000™ Spot Luminaire Users Manual (02.9673.0001).
Model Part Number Source
VL2000 Spot Luminaire* 20.9673.0001 700W Arc
VL2201 Spot Luminaire 20.9667.0001 400W Arc

VARI❋LITE® - VL2000™ S POT L UMINAIRE S ERVICE M ANUAL
2 24-March-2004 02.9673.0010 D
Customer Service
Our Goal
At Vari-Lite, we are committed to providing you the highest quality in customer
service. Our comprehensive resources are available to help your business succeed and
ensure you get the full benefit of being a Vari-Lite customer. Whether your needs are
telephone/troubleshooting assistance, product training or technical service, our full-
time staff of experienced professionals are on-hand to provide support.
How to Reach Us
For assistance in your area, call the dealer from which your product(s) were
purchased.
or
Contact an Authorized Service Center.
or
Contact the Vari-Lite Customer Service Department, 9am - 6pm CST Monday through
Friday, at the following:
phone: 1-877-VARI-LITE (1-877-827-4548)
fax: [phone]
email: [e-mail]
Additional Resources
For additional resources and documentation, please visit our website at:
www.vari-lite.com and follow the Support link.
Technical Bulletins and Notices
Technical bulletins concerning the latest changes to VARI❋LITE equipment are issued
from the Dallas, Texas USA office. They are documentation supplements that contain
procedures for equipment upgrades, retrofits, and repairs not found in the existing
manuals. Operator technical bulletins are also issued to document changes in control
software. Technical bulletins are integrated into the appropriate equipment manuals as
those manuals are revised. Bulletins are categorized by assembly or subassembly, and
identified by a number such as S2K-001 (VL2000 series luminaire Technical Bulletin
number 1).
Technical notices are also issued from the Dallas, Texas USA office. They are non-
procedural documents that contain information regarding product support issues,
current equipment problems, software bugs, and documentation corrections. All
technical notices begin with the prefix TN and are numbered sequentially, such as TN-
138 (Tech Notice number 138).