Varian CP-4900 Micro-GC Use and care manual

Varian B.V.
Herculesweg 8
4330 EA Middelburg
The Netherlands
© 2009 Varian, Inc. All Rights Reserved Printed in the Netherlands CP501459 Rev:4 July 2009
CP-4900 Micro-GC
Firmware Update Manual
The procedures outlined in this document are to be
implemented by trained Varian Service personnel only
and are not intended for Customer use.
The information provided in this manual will help you to install firmware Updates for the
CP-4900 Micro-GC.

Varian, Inc.
Varian, Inc. CP-4900 Firmware Installation Manual Page: 2
Installation of the Micro-GC Firmware Update Tool.
1. When selecting the Firmware update tool it will install the MPU Firmware setup and the
VirtualBox Software to perform an update from V1.40 to V2.12.
2. Click next.

Varian, Inc.
Varian, Inc. CP-4900 Firmware Installation Manual Page: 3
3. Please read the license agreement carefully, if agreed select” “I agree to the terms of
this License agreement” then click next, to continue with the next step.
4. Default the program will be installed in:
C:\Program Files\CP-4900 Tools\Firmware Update\2.12 then click next.

Varian, Inc.
Varian, Inc. CP-4900 Firmware Installation Manual Page: 4
5. Shortcut will be created, click next.
6. Click Next to start installation.

Varian, Inc.
Varian, Inc. CP-4900 Firmware Installation Manual Page: 5
7. Click Finish to complete the installation.
8. After installation of the MPU Setup it will install the VirtualBox, this can take several
minutes.
9. Click next.

Varian, Inc.
Varian, Inc. CP-4900 Firmware Installation Manual Page: 6
10.Please read the license agreement carefully, if agreed select” “I agree to the terms of
this License agreement” then click next, to continue with the next step.
11.No changes necessary, click next.

Varian, Inc.
Varian, Inc. CP-4900 Firmware Installation Manual Page: 7
12.Select the way you want features to be installed.
13.Proceed with installation now, click YES.

Varian, Inc.
Varian, Inc. CP-4900 Firmware Installation Manual Page: 8
14.Click install to start installation.
15.Depending on the Windows settings, it is possible that the above message will popup
several times that the Virtual software is not passed Microsoft LOGO, click “ Continue
Anyway”.

Varian, Inc.
Varian, Inc. CP-4900 Firmware Installation Manual Page: 9
16.Uncheck the Start Sun xVM VitualBox after installation, click Finish.
17.Click yes to start the Update.

Varian, Inc.
Varian, Inc. CP-4900 Firmware Installation Manual Page: 10
18.Enter the IP address of the CP-4900 Micro-GC and select Get MPU version, this
Update can only be done with V1.40 or higher.
Click “ Update Firmware” and the update will start.
19.Hit “Enter”.