VAULT PRO-EDBT User manual

PRO eDynamo bracket
Assembly Instructions PRO-EDBT

1
Parts Included
(2)
10-32x3/8
Flat Head
(1)
eDynamo bracket
With the Micro USB cable connected, insert the card
reader into the bracket.
With the MSR inserted, install the L-bracket to secure
(2)
6-32x1/8
Pan Head
(1)
MSR L-bracket
1
2
the reader in place. Use the 6-32x1/8 screws.
USB/iOS Y-Cable
(1)

2
Next connect the iOS cable to the iPad. Ensure your iPad
is already installed to your enclosure.
With your enclosure laying face down, align the bracket
3
4
to the corresponding holes on the enclosure. Install
using the 10-32x3/8 FH screws.

Warranty
This product comes with VAULT’s Lifetime Warranty (cables are under 90 day warranty). All items are covered under this warranty with the
following exceptions.
• Damage caused from misuse, abuse, neglect, acts of God.
• Lost parts or surface scratches from use or other actions.
• Stripped or broken screws, warped parts from misuse or
improper installation.
All warranty claims should be submitted through the company that you originally purchased the product
from. A receipt or other documentation showing date and location purchased will be required. Shipping
to VAULT and return shipping to the end user are the responsibility of the end user. VAULT reserves the
right to substitute a newer product or one of equal or higher value. If you should have any questions
concerning this policy or other items, please contact VAULT at the address contained in this document.
Assembly is now complete.
5