Vax MachAir UCA1GEV1 User manual

MachAir
POWERFUL AND
LIGHTWEIGHT
LET’S GET STARTED.
UCA1GEV1
UCA2GEV1
UCA3GEV1

Let’s talk safety
Basic
safety
precautions
Please keep instructions for further use and use only
as instructed in this guide. This vacuum cleaner is
intended for household use only and NOT for
commercial or industrial use.
• Only use the vacuum cleaner indoors on dry surfaces
and keep the area you’re cleaning well lit.
• Keep ngers, hair and loose clothing away from moving
parts and openings whilst using the vacuum cleaner.
Don’ts
• Don’t use this vacuum cleaner if it has been dropped,
damaged or left outdoors.
• Don’t run over the power cord or use vacuum cleaner
if the power cord or plug is damaged.
• Don’t handle the plug or use the vacuum cleaner with wet hands.
• Don’t pull or carry this vacuum cleaner by the power cord.
Don’t use the power cord as a handle, pull the power cord
around corners, sharp edges or close a door over the power
cord. Don’t unplug vacuum cleaner by pulling on the power cord.
• Don’t vacuum up hard or sharp objects such as glass, nails,
screws or coins etc.
Do’s
• Turn o all controls on the vacuum cleaner before disconnecting
or connecting the power cord.
• Always keep the power cord away from the brushes whilst
using your vacuum cleaner. After use always wrap the power
cord around the cord clips provided.
• Always make sure both the pre-motor/post-motor lters
are in place before use.
• Always make sure the brushbar is set to hard oor when using
your vacuum on the stairs and take extra care when positioning
the vacuum cleaner on the stairs.
• Always check the oorhead and accessories are free from
damage, dirt and debris before use.

• This appliance can be used by children aged from 8 years and above and
persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the hazards
involved. Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervision.
• Only Vax recommended tools should be used with this vacuum cleaner.
• Don’t vacuum up any ammable or combustible materials (lighter uid,
petrol, kerosene etc.) or use the vacuum cleaner in an area with explosive
vapours or liquid.
• Don’t vacuum up hot coals, cigarette butts, matches or smoking hot burning
items or use in an area where there may be harmful uids (chlorine, bleach,
and ammonia drain cleaner).
• Don’t attempt to remove blockages with sharp objects as this may cause
damage to your vacuum cleaner.
• Don’t use the vacuum cleaner with incorrect voltage as this may result in
damage or injury to the user. The correct voltage is listed on the ratings label.
• Don’t wash the post-motor lter.
• Always switch o the vacuum cleaner before disconnecting
or connecting the hose and accessories.
• Keep all openings clear and free from debris as this may aect
the airow/suction.
• Always replace the fuse in the plug with a British 13amp fuse.
• Always protect the power cable from heated surfaces and open ames.
• Use only CE approved 13amp extension cords, non-approved extension cords
may overheat. Care should be taken to arrange the extension cord as it could
be a trip hazard.
• Store the vacuum cleaner in a cool, dry area. If lters have been cleaned
as per user the guide instructions ensure they are thoroughly dry before
storing away.

Thank you for buying this Mach Air
vacuum cleaner.
Taking care of your carpets and hard oors
The Mach Air is designed to make vacuuming carpets and hard oors regularly, as eective and
ecient as possible and this user guide will help you get the most out of your machine.
Maintaining your carpets and hard oors will ensure they keep their appearance for longer.
You’ve chosen the carpets and hard oors for your home for a reason and Vax will help you
take good care of them.
Taking care of your Mach Air
Also inside this guide are instructions on maintaining your new machine, so that it’s always ready
when you are to tackle your carpets and hard oors.
We’re here if you need us
Instead of taking me back to the shop,
simply visit our online support:
vax.co.uk/support
Still need to get in touch?
Our UK based Customer Care Team are here to support you.
For help with assembly, operational or performance problems, or buying and tting new accessories,
you can nd all our contact details at vax.co.uk/contact
This user guide can be found online at: vax.co.uk/support

Contents
Let’s talk safety
Getting to know your machine
Getting started
Using your machine
Taking care of your machine
Accessories
What to do if it goes wrong
Getting in touch
Initial setup for normal operation
1. Use the base accessories.
– Shortest hose
– Extension tube set to shortest practicable length.
2. Clean lters installed.
3. Dust receptacle empty.
4. All air vents must be closed.
5. Floor heads/tools set to Carpet Mode for carpet cleaning.
6. Mechanical Agitation turned ON for carpet cleaning.
7. Floor heads/tools set to Hard Floor Mode for hard oor cleaning.
8. Mechanical Agitation turned OFF for hard oor cleaning. Some parts may vary according to model.
Please check inside the box for more details.
Included with
your machine
Mach Air
2-in-1 Tool
(Crevice Tool,
Dusting Brush)
Mach Air Revive
3-in-1 Tool
(Crevice Tool, Dusting
and Upholstery Tool)
2-in-1 Tool
(Crevice Tool,
Dusting Brush)
Mach Air Energise
Fur ‘n’ Flu Tool

Subject to technical change without notice. *To purchase consumables and accessories, please visit vax.co.uk
Upper handle release button
Hose to extension tube connector
Power on/o button
Power cord
Quick release
cord hook
Brushbar on/o button
Wheels
Hose to
machine connector
Hose
Accessories & Consumables
Technical Specication
Filter Kit (Type 90)*
1-1-134227
Belt
1-7-139141
3-in-1 tool
1-1-129167
Fur ‘n’ Flu tool
1-1-131392
Flexi Crevice tool
1-1-131393
Flat Upholstery tool
1-1-131394
Name Mach Air Series
Voltage 220-240V
Wattage 820W
Capacity 1.5L
Cord length 7m
Weight 5kg
Extension tube
Getting to know your machine
Handle
Post-motor lter cover
Air vent
Rotating brushbar
Separator
Dirt container
Dirt container
release button
Carry handle

Getting started
*To purchase consumables and accessories, please visit vax.co.uk
Assembling your upright
Insert the handle.
Twist the quick release cord
hook to release the power cord.
Place the tool onto
the on-board storage area.
Plug in your machine and push
the ON/OFF button to switch on.
Brushbar on — carpets
Brushbar o — hard oors
PLEASE READ ‘LET’S TALK SAFETY’ AT THE BEGINNING BEFORE USE.
How to use
Recline the vacuum.
IMPORTANT: Switching the brushbar on whilst cleaning hard oors may damage ooring.
NOTE: The brushbar will not spin until the machine is reclined.

Using your machine
Before you begin cleaning
• Always switch o and unplug the vacuum cleaner before connecting or disconnecting the hose/attachments, or removing
and emptying the dirt container.
• The vacuum cleaner is equipped with a thermal cut-out. If for any reason the vacuum cleaner does overheat, the
thermostat will automatically turn the vacuum cleaner o. If this happens, switch the vacuum cleaner o and unplug from
the electrical socket. Remove and empty the dirt container and also check the vacuum cleaner for blockages. Allow the
vacuum cleaner to cool for approximately 1 hour (if you have cleaned the lters please wait 24 hours for the lters to fully
dry before putting back into the vacuum).
• Pre-motor lters require cleaning at least every 3 months.
• If the vacuum cleaner is blocked, switch o and unplug before removing the blockage.
• When using the accessories always make sure the machine is stood in the upright position.
Extension tube
Remove the hose end
from the oorhead.
Remove the
extension tube.
Choose an accessory.
2-in-1 tool converts into:
A = Crevice Tool
B = Dusting Brush
Attach the accessory
to the hose end.
3-in-1 Tool converts into:
A = Crevice Tool
B = Upholstery Tool
C = Dusting Brush
A
B
C
Attach the accessory to the
extension tube.
Attaching the hose
Attach the hose to the
extension tube.
Using accessories
NOTE: The Turbotool, 2-in-1 Tool and 3-in-1 Tool can all be attached to the tube or directly to the hose.
NOTE: The brushbar will not spin until the machine is reclined.

Taking care of your machine
Emptying and cleaning the dirt container
How to use the air vent
Cleaning the HEPA pre-motor lter
Press the dirt container release button and pull
to remove the dirt container.
Slide the vent cover open to decrease suction,
if required on high piled carpets.
Turn the dirt container lid
anti-clockwise…
Tap the lter over a bin
to release any dirt.
Hold the dirt container over a bin and press the dirt
container release button allowing dirt to fall out.
Close the vent cover to increase suction,
for maximum cleaning on hard oors.
…and lift to remove.
Wash the lter under
running water (40°C max).
Grasp the tab on the lter
and pull to remove.
Leave to fully dry for at least
24 hours before putting back
into the vacuum cleaner.
40°C max
tap
!
!
!
!
24hr
MAX
40˚C
!
MAX
40˚C
NOTE: For most ecient results the air vent should be closed.

Taking care of your machine
Cleaning the shroud
Lift to remove the separator
from the dirt container
Press the button on the post-motor
lter cover and remove.
Tap over a bin to remove
dirt and debris.
Brush dirt from the shroud.
Remove the post-motor lter
from the lter cover.
Check the post-motor lter
for discolouration.
tap
HEPA post-motor lter maintenance
IMPORTANT: The exhaust lter is designed to oer long life with no maintenance.
The lter should be checked periodically and when heavily discoloured it should be replaced.
Please do not wash, scrub or brush the lter as this will damage the delicate lter media.
Turn the dirt container lid
anti-clockwise…
…and lift to remove.