Vector Travelmate VEC002 User manual

VEC002
AC/DC CONVERTER
OWNER’S MANUAL
READ ALL INSTRUCTIONS AND PRECAUTIONS
CAREFULLY BEFORE USING THIS PRODUCT.
4140 SW 28TH WAY, FT. LAUDERDALE, FL 33312
TEL: [phone] • FAX: [phone]
1 YEAR LIMITED WARRANTY
This Vector Manufacturing, Ltd. product is warranted, to the original
purchaser only, to be free of defects in materials and workmanship for
One Year from the date of purchase without additional charge. In no event
will Vector Manufacturing, Ltd. be responsible for any amount of damages
beyond the retail purchase price of the product. All Vector Manufacturing,
Ltd. products must be registered within (10) days of purchase. To activate
this warranty, mail the completed registration form along with a copy of
the original sales receipt to the address shown below.
RETURN/REPAIR POLICY: Defective products, other than accessories,
may be returned postage prepaid to Vector Manufacturing. Any defective
product, other than accessories, that is returned to Vector Manufacturing
within 30 days of the date of purchase will be replaced free of charge. If
such a product is returned more than 30 days but less than one year from
the purchase date, Vector Manufacturing will repair the unit or, at its
option, replace it free of charge.
LIMITATIONS: This warranty does not cover accessories, bulbs, fuses
and batteries, defects resulting from normal wear and tear (including chips,
scratches, abrasions, discoloration or fading due to usage or exposure to
sunlight), accidents, damage during shipping to our service facility,
alterations, unauthorized use or repair, neglect, misuse, abuse, failure to
follow instructions for care and maintenance, fire, flood and Acts of God.
CONVERTS
110 /120 VOLT AC 60 Hz
TO 12 VOLT DC 4 AMP
If your problem is not covered by this warranty, call our Technical Support
Departmentat(954)584-4446forgeneralrepairinformationandcharges
if applicable.
STATE LAW RIGHTS: This warranty gives you specific legal rights. Some
states do not allow limitations on how long an implied warranty lasts or
the exclusion or limitation of incidental or consequential damages, so the
exclusions or limitations stated herein may not apply. This warranty gives
the purchaser specific legal rights; other rights, which vary from state to
state, may apply.
TO REQUEST WARRANTY SERVICE FOR THIS PRODUCT:
Contact Vector Manufacturing Technical Support by telephone, fax or mail.
We suggest that you keep the original packaging in case you need to ship
the unit. When returning a product, include your name, address, phone
number, dated sales receipt (or copy) and a description of the reason for
return and product serial number if available. After replacing the unit, we
will attempt to return it to you within four weeks.
All Vector Manufacturing, Ltd. products must be registered within (10)
days of purchase to activate this warranty. Mail the completed registration
card, along with a copy of the original sales receipt to:
ATTN.: CUSTOMER SERVICE / VECTOR MANUFACTURING, Ltd.
4140 SW 28th Way, Ft. Lauderdale, FL 33312

CAUTIONS: • Intended for indoor use only. • Do not expose to rain, moisture or sunlight. • Do not block ventilation slots. • Do not attempt to open outer casing. Electrical hazard may result. •Only use to operate 12-volt devices that are equipped with a power cord rated at a
minimum of No. 18 AWG copper.
• Do not insert fingers into the converter's 12 volt receptacle.
• Keep children away from converter while it is operating. • Do not insert cigarette lighter into converter’s socket. • The 12 volt socket is wired so the center conductor is Plus (+) and the shell conductor is Negative (-). Make sure the 12 volt appliance plug is wired correctly.
Congratulations on your selection of the Vector AC/DC adapter. It is useful for a wide variety of applications including: Operating and charging cell phones, automotive accessories that require less than 4 Amps of 12 Volt current. This includes 12 Volt operated Thermoelectric Coolers/Warmers, Spotlights to 50 wattbulbrating,PortableAirIonizers,andChargingJumpstarters. The VEC002 is UL listed and is tested to USA (UL) and Canadian Safety Standards (cUL).
TO USE: •Connect converter's power cord to 110/120 Volt AC outlet. •Insert 12 Volt appliance plug into the converter’s socket. TO DISCONNECT:
•Remove 12 Volt plug from converter. •Disconnect converter's power cord from 110/120 Volt ac outlet. •
Allow converter to cool for at least 30 minutes before storing.
TROUBLESHOOTING: NO OUTPUT FROM CONVERTER–
12 Volt plug not making good connection in socket, rotate 12 Volt plug in socket.
DIRTY CONTACTS IN 12 VOLT SOCKET–
With power disconnected, clean socket and reinsert plug.
AC POWER IS NOT AVAILABLE–
Check AC outlet by plugging in another appliance. If outlet has no power, check fuses, circuit breakers and wall switches to restore power.
FUSE IS BLOWN (OPEN)–
See fuse replacement.
TO REPLACE FUSE: • Disconnect AC and appliance from from converter. •Place your unit on a stable flat surface. •Remove screws from unit's cover, then remove cover. • Follow wiring from input plug to rubber "boot" that covers in-line fuse.
•
Carefully remove rubber boot, then remove fuse from fuse holder.
•Remove fuse. If it is discolored or if its internal wire is broken, replace
with identical type and amper age rating (2 Amp gma).
• Replace fuse and rubber "boot". • Replace cover and screws without over-tightening. •Connect AC to converter and plug in appliance. Test the appliance for
proper operation. If there is a problem with the converter, call Vector Technical Supportat 954-584-4446, Extension 119.
CLEANING INSTRUCTIONS: •Do not immerse converter in water. • Wipe outside surface of the converter with a damp cloth. Theuse of
any other material may cause permanent damage and will void the warranty.