Velleman CAMTVI2 User manual

CAMTVI2
HD TVI BULLET CAMERA WITH 12 IR LEDS
HD DOME TVI CAMERA MET 12 IR LEDS
CAMÉRA DÔME TVI HD À 12 LED IR
CÁMARA TVI DOMO HD CON 12 LEDS IR
DOME-TVI-HD-KAMERA MIT 12 IR-LEDS
USER MANUAL 2
GEBRUIKERSHANDLEIDING 10
MODE D'EMPLOI 18
MANUAL DEL USUARIO 26
BEDIENUNGSANLEITUNG 34

CAMTVI2
V. 01 –12/02/2015 2 ©Velleman nv
USER MANUAL
1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of
the device after its lifecycle could harm the environment. Do not
dispose of the unit (or batteries) as unsorted municipal waste; it
should be taken to a specialized company for recycling. This device
should be returned to your distributor or to a local recycling
service. Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Velleman! Please read the manual thoroughly before
bringing this device into service. If the device was damaged in transit, do
not install or use it and contact your dealer.
2. Safety Instructions
Keep this device away from children and unauthorized users.
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a
person responsible for their safety.
Children shall be supervised to ensure that they do not play with
the appliance.
Risk of electroshock when opening the cover. Touching live wires
can cause life-threatening electroshocks. Do not disassemble or open
the housing yourself. Have the device repaired by qualified
personnel.
Do not disassemble or open the cover. There are no user-serviceable
parts inside the device. Refer to an authorized dealer for service
and/or spare parts.
3. General Guidelines
Refer to the Velleman® Service and Quality Warranty on the last pages
of this manual.
Keep this device away from dust and extreme temperatures.

CAMTVI2
V. 01 –12/02/2015 3 ©Velleman nv
Protect this device from shocks and abuse. Avoid brute force
when operating the device.
Familiarise yourself with the functions of the device before actually
using it.
All modifications of the device are forbidden for safety reasons. Damage
caused by user modifications to the device is not covered by the
warranty.
Only use the device for its intended purpose. Using the device in an
unauthorised way will void the warranty.
Damage caused by disregard of certain guidelines in this manual is not
covered by the warranty and the dealer will not accept responsibility for
any ensuing defects or problems.
Due to constant product improvements, the actual product appearance
might differ from the shown images.
Product images are for illustrative purposes only.
Do not use this product to violate privacy laws or perform other illegal
activities.
Do not switch the device on immediately after it has been exposed to
changes in temperature. Protect the device against damage by leaving
it switched off until it has reached room temperature.
Keep this manual for future reference.
4. Features
This HDCCTV or TVI (High-Definition Transport Video Interface) camera is
equipped with a Sony CMOS image sensor. The video image quality is
1080P. The IR-cut filter will filter the IR light, so it cannot distort the
colour image. When it gets dark, the camera automatically switches to night
mode. In night mode, the camera enables the IR LEDs and disables the IR-
cut filter.
weatherproof
B/W night vision (IR LEDs)
1080P video signal
vandal resistant bracket
special functions via on-screen display (OSD) set-up menu:
oprivacy zone
owhite balance
omirror and flip function
oday/night mode

CAMTVI2
V. 01 –12/02/2015 4 ©Velleman nv
5. Installation
1. Remove the camera base. Loosen the hex screw on the outer ring.
Hold the outer ring and turn the base in an anti-clockwise direction to
unscrew it.
2. Choose your mounting spot. Take the base as a template and drill the
necessary mounting holes. If necessary, drill a hole for routing the
cables. Insert a nylon plug in each hole.
3. Pass the camera cable through the base and fix the bracket using the
included screws. If applicable, pass the cable through the routing hole.
4. Slightly adjust the camera lens and aim it toward the surveillance
area.
5. Replace the inner ring over the camera and hold in place.

CAMTVI2
V. 01 –12/02/2015 5 ©Velleman nv
6. Replace the outer ring over the inner ring and turn in a clockwise
direction to fix.
7. Connect and power your camera (see below). Check the viewing angle
on your PC.
8. Adjust the position and viewing angle if necessary.
6. Connection
1. Connect the power terminal of the camera to a 12 VDC regulated
power supply.
2. Connect the video output of the camera to the video input of your DVR
using a 75 Ωcoaxial cable.
Remarks:
Only use a regulated 12 VDC power adapter. Using any other type will
damage this camera.
Protect the connectors against moisture by applying some insulating
tape over the connectors.
7. Camera Configuration
This camera has its own configuration menu. Either of the two methods
below allows access the menu.

CAMTVI2
V. 01 –12/02/2015 6 ©Velleman nv
7.1 Method 1
1. On the DVR live view, click the camera’s channel to display it in full
screen.
2. Open the control panel by clicking the camera and the panel icons.
3. The control panel appears.
7.2 Method 2
1. On the DVR live view, right-click in the screen to display the DVR
menu.
2. Select ADVANCED CONFIG and then DCCS.
ADVANCED CONFIG
CAMERA
CH1
CH2
CH3
CH4
DETECTION
MENU
SETUP
ALERT
NETWORK
DISPLAY
RECORD
DEVICES
DCCS
DEVICE
XXXXX
NOTIFY
CONNECTION
OK
EXIT

CAMTVI2
V. 01 –12/02/2015 7 ©Velleman nv
3. Select the camera’s channel and click SETUP to enter the camera’s
menu.
DAY/NIGHT
MODE
EXT / COLOR
/ B&W /
AUTO
day or night mode
D TO N
1 ~ 63
sensitivity level for
day-to-night transition
N TO D
1 ~ 63
sensitivity level for
night-to-day transition
DELAY TIME
1 ~ 63
delay time for
day/night transition
AWB
MODE
AUTO / USER
/ PUSH /
8000K /
6000K /
4200K /
3200K
white balance
R G GAIN
1 ~ 255
red/green ratio
B G GAIN
1 ~ 255
blue/green ratio
AE
MODE
ESC / HOLD
exposure mode
BRIGHT
0 ~ 255
brightness level
SHUTTER
AUTO /
shutter speed
FLICKER
OFF / 50HZ /
60HZ
flicker mode
BLC
0 ~ 16
backlight compensation
AGC
1 ~ 5
auto gain control
LSC
ON / OFF
lens shading correction
SPECIAL
PRIVACY
ZONE
AREA SEL /
MASK PAT /
SX / EX / SY
/ EY
mask area
MOTION
MATION /
SENSITI /
ALARM /
HOLD TIME
motion detection area
HLC
HLC / MASK
VALUE /
TRESHOLD
strong backlight
suppression
EFFECT
COLOR GAIN
0 ~ 255
gain level
COLOR HUE
0 ~ 71
hue level
SHARPNESS
0 ~ 255
sharpness level
CONTRAST
0 ~ 255
contrast level
BRIGHT OFF
-128 ~ 127
brightness level

CAMTVI2
V. 01 –12/02/2015 8 ©Velleman nv
MIRROR
OFF / ON
rotate image
FLIP
OFF / ON
flip image
SYSTEM
CAMERA ID
0 ~ 255
camera ID
ID DISP
OFF / ON
camera ID display
NAME DISP
OFF / ON
camera name display
LANGUAGE
ENG / CHI
English / Chinese
FACTORY
INIT
OFF / ON
restore factory settings
Remark:
This camera will only work with TVI-compatible DVRs (Velleman
DVRxTx series). Velleman nv does not guarantee this camera will work
with other types of DVRs and can therefore not be held responsible in
this event.
8. Cleaning and Maintenance
The camera does not need any particular maintenance. However, it is
advisable to clean it occasionally to keep it looking like new.
9. Technical Specifications
IP rating
IP66
pick-up element
1/2.7" CMOS image sensor
number of pixels
1930 (H) x 1088 (V)
resolution
1080P
digital signal processor
Techpoint chip
min. illumination
0.1 lux / F1.8
IR LEDs
12
IR-cut filter
yes
max. IR projection distance
15 m
S/N ratio
> 48 dB (AGC off)
lens
f3.6mm / F1.8
lens angle
horizontal
96°
vertical
50°
diagonal
116°
BLC
yes
AGC
yes
white balance
automatic / user / push / 8000K / 6000K /
4200K / 3200K
video output
BNC connection - TVI signal
audio
no
power supply
12 VDC

CAMTVI2
V. 01 –12/02/2015 9 ©Velleman nv
current consumption
max. 200 mA
operating temperature
-20° C to 40° C - RH max. 95 %
dimensions
198 x 65 x 68 mm
weight
315 g
Use this device with original accessories only. Velleman nv cannot
be held responsible in the event of damage or injury resulting from
(incorrect) use of this device. For more info concerning this product
and the latest version of this manual, please visit our website
www.velleman.eu. The information in this manual is subject to
change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All
worldwide rights reserved. No part of this manual may be copied,
reproduced, translated or reduced to any electronic medium or otherwise
without the prior written consent of the copyright holder.

CAMTVI2
V. 01 –12/02/2015 10 ©Velleman nv
GEBRUIKERSHANDLEIDING
1. Inleiding
Aan alle burgers van de Europese Unie
Belangrijke milieu-informatie betreffende dit product
Dit symbool op het toestel of de verpakking geeft aan dat, als het
na zijn levenscyclus wordt weggeworpen, dit toestel schade kan
toebrengen aan het milieu. Gooi dit toestel (en eventuele
batterijen) niet bij het gewone huishoudelijke afval; het moet bij
een gespecialiseerd bedrijf terechtkomen voor recyclage. U moet
dit toestel naar uw dealer of naar een lokaal recyclagepunt
brengen. Respecteer de plaatselijke milieuwetgeving.
Hebt u vragen, contacteer dan de plaatselijke autoriteiten
betreffende de verwijdering.
Dank u voor uw aankoop! Lees deze handleiding grondig voor u het toestel
in gebruik neemt. Werd het toestel beschadigd tijdens het transport,
installeer het dan niet en raadpleeg uw dealer.
2. Veiligheidsinstructies
Houd dit toestel buiten het bereik van kinderen en onbevoegden.
Dit toestel is niet geschikt voor gebruik door personen (kinderen
inbegrepen) met verminderde fysieke, zintuiglijke of geestelijke
capaciteiten of gebrek aan ervaring en kennis, tenzij zij onder
toezicht staan of instructie hebben gekregen over het gebruik van
het toestel van een persoon die verantwoordelijk is voor hun
veiligheid.
Houd toezicht op kinderen om te voorkomen dat ze met het
toestel spelen.
Elektrocutiegevaar bij het openen van het toestel. Raak geen
kabels aan die onder stroom staan om dodelijke elektrische
schokken te vermijden. Open de behuizing niet zelf. Laat het
onderhoud van het toestel over aan een geschoolde vakman.
Demonteer of open dit toestel NOOIT. Er zijn geen onderdelen in het
toestel die door de gebruiker gerepareerd kunnen worden. Voor
onderhoud of reserveonderdelen, contacteer uw dealer.