Velocap HDR X User manual

Instruction Manual

3.5mm audio plug
audio mix 3.5mm
Microphone plug
3.5mm audio plug
speaker,earphone
H.264 / H.265 Switch button
Interface:
Snapshot button
Rec/Stop button
On/Off button Power HDMI OUT(up to 4k30hz) HDMI IN(up to:4k30hz)
Supports USB pen drive( up to 256g FAT32 ,NTFS or exFat);
Hard Disk(up to 8T FAT32 ,NTFS or exFat)
FAT32 format: 4G/file
NTFS & exFAT format :16G/file
Power
5V/2A OUT IN
5V/2A
Mic
Line Out
Line In H.264
H.265
Snapshot Stop
Rec
USB Storage

Specifications:
Video input/output resolution up to : 4k30 ( can capture any resolution input ).
Input devices: Play Station 4pro, Xbox One & Xbox 360, Nintendo Switch & Wii U
Output : HDMI (pass-through) up to 4k30
Capture resolution : UHD: 4K30hz
Capture format : H.264 /H.265 / AAC/MP4 (hardware encoding)
Sampling rate : 48kHz PCM
Button mode:H.264/H.265, screenshot, record / stop
LED (logo): 4K record LED is Green/ below 4k is Blue LED
LED (side ring): H.264 is blue/ H.265 is green
H264 is compressed, the video bit rate is set to UHD 16Mbps, FHD 12Mbps, HD 8Mpbs, SD 4Mbps.
H265 is compressed, the video bit rate is set to UHD 12Mbps, FHD,HD 8Mbps, SD 4Mbps.
Screenshot format: JPG
USB Storage
MAX
FHD: 1080p60, 1080p501080p30, 1080p25, 1080p24 etc.
HD: 720p60, 720p50 etc.

Product function and more tips:
LED (top cover): blue for FHD and below/ green for 4k recording
LED (side ring): H.264 is blue/ H.265 is green
USB DISK USB DISK
Supports USB Disk( up to 256g FAT32 ,NTFS or exFat;Hard Disk(up to 8T FAT32 ,NTFS or exFat)

Device is recording
1. Screenshot during recording
2. Screenshot in preview

No storage device found
1. When no USB disk or Hard disk is inserted.
2. There is a problem with the USB disk or hard
disk.
Not enough space available
When there is not enough space for the storage.
Unsupported resolution
The input resolution is incorrect.
please check the input resolution of the device

1. Only supports stereo input (HDMI INPUT)
2. Not support 5.1, 7.1 channels
HDCP video is not supported
No signal detected
The input resolution is incorrect.
please check the input resolution
of the device