Ventamatic QuFresh QFAP-950 User manual

SAFETY
This safety alert symbol is used to alert you to potential
personal injury hazards. Obey all safety messages that
follow this symbol to avoid possible injury or death.
Danger indicates an imminently hazardous situation, which,
if not avoided, will result in death or serious injury.
DANGER
Warning indicates a potentially hazardous situation, which,
if not avoided, could result in death or serious injury.
WARNING
Caution indicates a potentially hazardous situation, which,
if not avoided, may result in minor or moderate injury.
CAUTION
Used to indicate an electrical shock or electrocution hazard.
ELECTRICAL
SHOCK
SAFETY INSTRUCTIONS WARNING: TO REDUCE THE RISK OF
FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE
THE FOLLOWING:
FOR HOUSEHOLD USE ONLY
QTY Printed
SKU / Document #
©2022 VENTAMATIC, LTD. 2022 MAXX AIR QFAP950 INSMAN 0122/#1249
Ventamatic, Ltd. P.O. Box 728, Mineral Wells, TX 76068-0728 1-800-433-1626 Fax: [phone] www.BVC.com
Owner’s Manual
QuFresh Air Purifier
QFAP-950
2022 MAXX AIR QFAP210 InsMan #1249

Table of Contents
1. Safety Precautions……………………………………………………………………… 1
2. Product Introduction…………………………………………………………………. 2
3. Before use……………………………………………………………………………………. 3
a. Removal and Installation of Side Cover Plate……………….. 3
b. Place of Air Purifier………………………………………………………………. 4
c. Install the Filter Assembly…………………………………………………… 5
4. Filter Purification………………………………………………………………………… 6
5. Operation Mode and Function Description………………………….. 7
a. Function Description of Control Panel…………………………….. 7
b. Turn on the Air Purifier……………………………………………………….. 7
c. Air Volume Setting………………………………………………………………. 8
d. Sleep Mode……………………………………………………………………………. 8
e. Timer Mode……………………………………………………………………………. 8
f. Child Lock Function…………………………………………………………….. 8
6. Maintenance and Cleaning..…………………………………………………….. 9
a. Clean Air Purifier………………………………………………………………….. 9
b. Replace the Filter Screen…………………………………………………… 10
7. Troubleshooting………………………………………………………………………… 11

User Manual
2. Product Introduction
Front purifier
body
I
Composite filter
Pre-filter
screen
Left cover
plate
Sensor
Rear purifier body
Right side
cover plate
Composite
filter
Air quality
digital display
Key control
panel
Air outlet
cover plate
Pre-filter
screen
2

User Manual
3 Before Use
Removal and installation of side cover plate
1. Hold the grooves of the left and right side
panel covers by hand and pull them out at
the same time.
2. When re installing the side panel cover, align and
insert the fixed groove, push the side panel cover
close to the machine, and the side panel cover will
automatically close to the machine.
3

User Manual
Place of air purifier
Do not obstruct the air inlet and outlet
to ensure adequate ventilation and
maximum efficiency of the machine.
In order to achieve good air circulation
effect in your room, make sure that the
air inlet and outlet of the machine are
not less than 20 in. away from the
obstacles.
50cm

50cm
4

User Manual
Place of air purifier
Do not obstruct the air inlet and outlet
to ensure adequate ventilation and
maximum efficiency of the machine.
In order to achieve good air circulation
effect in your room, make sure that the
air inlet and outlet of the machine are
not less than 20 in. away from the
obstacles.
50cm

50cm
4
User Manual
Install the filter assembly
All filters are attached to the air
purifier, but the packing of the
filter must be removed before
using the product. Please fol low
the instructions below to remove
the filter and its package, and then
put it back into the purifier.
1. Remove all packaging materials
and place the machine on a dry,
stable, level surface.
2. Hold the groove of the left and
right side plate cover with your
hand and pull it out at the same
time.
3. Remove all filters inside the purifier.
4. Remove all packing materials on
the filter screen and put the filter
screen back into the purifier.
5. Re install the side cover, align
and insert the fixed groove, and
then push the side cover close to
the machine, and the side cover
will pull in automatically.
5

User Manual
4 Filter purification
Step 1: Primary filtration
Step 2: H11 high efficiency filtration Step
3: Activated carbon filtration
1. Primary filtration
Remove large particles,
including hair, fiber,
dander, etc.
2. H11 high efficiency filtration
It can effectively filter PM2.5,
smoke, pollen, mites and
other particles.
3. Activated carbon filtration
High quality activated carbon,
modified by special proprietary
technology, can effectively purify
formaldehyde and other gas
pollutants.
Clean air output
Polluted
air
entering
Polluted
air
entering
6

User Manual
5 Usage method
Function description of control panel
2 4 B
. . .

 
Child lock Timer ON/OFF
 
Plug in the power supply
When the power is plugged
in, a long beep will sound
and all the lightst will be on
(except the air quality
indicator) for 1 second. After
that, the air quality indicator
will be red for 0.5 second,
green for 0.5 second, and
blue for 0.5 second. Then the
power indicator will be half
on, and the machine will
enter the standby mode.
1
.
2 3 Auto
. . .
£ "
Speed
 
1. Speed button
2. Power button
3. Timer button
4. Child lock button
Turn on the purifier
Press the on key (as shown in the
figure), the air cleaner will be turned on.
Within 10 seconds after the air quality
sensor is just opened, the air quality
sensor needs to warm up. After 10
seconds of operation, the air quality
sensor will automatically and quickly
identify the current air quality, and the
current air quality can be reflected
through the color and digital display of
different air quality indicator lights.
0 Blue
0
Green
0
Red
000-075
076-150
151-999
Excellent
Good
Poor
7

User Manual
Air volume setting
1 2 3 Auto
   
0�

Timer setting
1 2 4 8
   
er
•
Ch�o
Long press the child lock key for 3
seconds to prompt that the sound is
on, and the machine enters the child
lock mode. In the child lock mode, any
key function is invalid. Long press the
anion key again for 3 seconds to exit
the child lock mode.
Fan speed, air volume can be 1, 2,
3, or auto speed, (sleep) cycle
selection.
Speed
Timer, the machine can be
selected in 2 hours, 4 hours, 6
hours, 8 hours.
Lock Function
8

User Manual
6 Maintenance and cleaning
9

User Manual
Replacing the filter
When the indicator light on the filter reset
key flashes slowly, the user is reminded to
replace the filter.
1. Remove all filters from the
machine and remove all
packaging materials from the
new filter.
2. Install the composite
filter into the machine.
3. Replace the filter screen, re-
install the left and right side
panels, and plug in the power plug.
&
Attention
Please shut down unit before
replacing the filter.
The filter screen of this product is a
composite filter screen, which is easy
to damage. The general service cycle
is 6 months.
The above time is for reference only,
users can change it according to the
actual
use environment.
10

User Manual
Replacing the filter
When the indicator light on the filter reset
key flashes slowly, the user is reminded to
replace the filter.
1. Remove all filters from the
machine and remove all
packaging materials from the
new filter.
2. Install the composite
filter into the machine.
3. Replace the filter screen, re-
install the left and right side
panels, and plug in the power plug.
&
Attention
Please shut down unit before
replacing the filter.
The filter screen of this product is a
composite filter screen, which is easy
to damage. The general service cycle
is 6 months.
The above time is for reference only,
users can change it according to the
actual
use environment.
10
User Manual
7 Troubleshooting
This chapter lists the common problems that may be encountered when using this product. If you are unable to
solve the problem according to the information below, please contact the customer service center or the
dealer.
State
The machine
won't start
Fan not working
Poor
performance
or sub- optimal
purification
Possible causes
The power cord is not plugged in
The power
cord is damaged
The machine is not on
The motor
is damaged
Foreign particles inside the
machine
The filter was not replaced
The air inlet
or outlet of the
machine
is blocked
The plastic package of the
filter is
not removed
There is not
proper
clearance or space around
the
machine to ventilate it
There is no filter in the machine
Possible solutions
Pull out the power cord
and plug in again
Contact customer service
center or dealer
Contact customer service
center or dealer
Contact customer
service center
or dealer
Remove the plastic package
of the filter screen for reuse
Make sure that the air inlet
and outlet
of the machine
are not less than 50cm
away from
the obstacles
Make sure that the filters
are placed in the machine
in the order indicated
More than expected room
coverage
Recheck whether the area of the
used room is consistent with the
specified area of the machine
Pull out the power plug and plug
in the power again
Contact customer service
center or dealer
Replace a new set of filter
11

VENTAMATIC, Ltd.
LIMITED WARRANTY STATEMENT
This warranty is underwritten by Falco Insurance Company and is extended to the original
retail purchaser of this model or, if this unit is purchased and requires installation by a building
contractor, to the original owner of the home. No subsequent purchaser of the unit or of a home
in which it is installed is entitled to any of the benefi ts of this warranty.
This product is warranted against defects in materials and workmanship for a period of one (1)
year from the date of original retail purchase. No other parts or components are warranted.
There is no warranty for defects caused by abuse, faulty installation, or the like.
Repairs or replacement parts supplied under this warranty are warranted only for the period of
this warranty; that is, one (1) year from the date of the original retail purchase of the unit.
In the event of a defect or malfunction, we will replace or repair the defective part or component
only and return the new or repaired part to you freight prepaid.
You must bear all other expenses incurred in obtaining repairs, including labor required for fi eld
repair or replacement, and the cost of shipping the defective part to us. You must also bear the
cost of repair to or replacement of any part or component and the shipping charges incurred
for the repair or replacement and return to you of any part or component not covered by this
warranty, including parts or components damaged by you.
The company reserves the right to demand and receive written evidence of the date of purchase
before undertaking its obligations under this warranty. The right to demand and receive written
evidence of date of purchase extends to all licensed dealers of Ventamatic, Ltd. products.
You should, therefore, retain your sales slip and attach a copy of it to the warranty claim.
To start a warranty claim you must:
Contact Ventamatic, Ltd.
An RGA (Returned Goods Authorization) form is required for returns to the factory
to ensure your return can be processed effi ciently and quickly. Please contact
Ventamatic, Ltd. toll-free at 800-433-1626 or via web at www.bvc.com to obtain an
RGA and follow the instructions given.
There is no informal dispute settling mechanism available in the event of a controversy involving
this warranty.
Any and all implied warranties which may exist terminate upon the expiration of this warranty
one (1) year from the date of the original retail purchase. Some states do not allow limitations on
how long an implied warranty lasts, so this limitation may not apply to you.
Ventamatic, Ltd. is not liable to you for incidental or consequential damages arising out of defect
or malfunction of a unit or its installation or out of any alleged breach of this warranty. Some
states do not allow the exclusion or limitation of incidental or consequential damages, so this
limitation may not apply to you.
This warranty gives you specifi c legal rights and you may also have other rights which may vary
from state to state.
rev. 04/19
Ventamatic, Ltd. P.O. Box 728, Mineral Wells, TX 76068-0728 1-800-433-1626 Fax: [phone] www.BVC.com
©2022 VENTAMATIC, LTD. 2022 MAXX AIR QFAP950 INsMAN 0122/#1249