Vents TRF-220/12-25 User manual

2013
TRF
STEP-DOWN
TRANSFORMER
www.ventilation-system.com
USER MANUAL

The present operation manual consisting of the technical details, operating instructions and technical
specification applies to the step-down transformer and covers its installation as well as the regulations and
warnings required for correct and safe operation of the product.
Disconnect the product from power mains prior to any connection, servicing and repair operations.
Mounting and maintenance are allowed for duly qualified electricians with valid electrical work permit for
electric operations at the units up to 1000 V after careful study of the present user's manual.
The single-phase power mains must comply with the acting local electrical norms and standards.
The fixed electrical wiring must be equipped with an automatic circuit breaker.
The transformer must be connected to power mains through an automatic circuit breaker QF integrated into
the fixed wiring system with the gap between the breaker contacts on all poles not less than 3 mm.
Prior to connecting the product to the power mains check for visible damage as well as for any foreign
objects in the unit casing.
RESTRICTIONS:
The product may only be used as intended. No modifications or alterations are allowed;
Do not use the product if the ambient air consists contains explosive or corrosive substances;
Avoid moisture and splashes on the transformer casing;
Do not block the ventilation holes in the casing;
Do not position the transformer close to heating appliances.
The product is not to be used by children and persons with reduced physical, mental or sensory capacities,
without proper practical experience or expertise, unless they are controlled or instructed on the product
operation by the person(s) responsible for their safety.
Do not leave children unattended and do not let them play with the product.
2
WARNING
!
Recycle at the end of the service life.
Do not dispose the product with unsorted municipal trash.

Read the present user manual carefully before proceeding with installation works.
Compliance with the manual requirements ensures reliable operation and long service life
of the product. Keep the user's manual available as long as you use the product as you may
need to re-read the information on the product servicing.
DELIVERY SET
The delivery set:
1. Transformer - 1 item;
2. Screws and dowels - 2 items;
3. Plastic screwdriver - 1 item (only for the models with a timer);
4. Spare fuse 0.25 A/250 V - 1 item;
5. User's manual;
6. Packing box.
MAIN TECHNICAL DATA
BRIEF DESCRIPTION
The TRF-220/12-25 K transformer is designed for safe ~12 V voltage power supply to domestic fans.
TRF-220/12-25 K - basic model, fig. 3;
TRF-220/12-25 KV - modification with a pull-cord switch, fig. 3;
TRF-220/12-25 KT - modification with a run-out timer adjusted from 2 to 30 minutes, fig. 4;
TRF-220/12-25 KTH - modification with a run-out timer adjusted from 2 to 30 minutes and a humidity sensor
with the set point adjusted from 60% up to 90%, fig. 4;
TRF-220/12-25 KTP - modification with a run-out timer adjusted from 2 to 30 minutes and a motion sensor
with sensitivity area 1-4 meters and viewing angle up to 100° fig. 4.
Due to constant improvements the design of some models may slightly differ from those ones described
in this manual.
Input voltage [V ~ 50/60 Hz]
Output voltage [V ~ 50/60 Hz]
Max. load power [W]
Max. load current [A]
Ingress protection
Weight [kg]
220-240
12
16
2
IP 30
0,85
3

OPERATION REQUIREMENTS
The transformer is designed for connection to 220…240 V 50/60 Hz power mains and is rated for continuous
operation always connected to power mains.
The product is rated for operation at the ambient temperature ranging from +1 °C up to +45 °C.
The product requires no grounding.
CONTROL LOGIC
TRF-220/12-25 KT - the transformer supplies voltage to the connected fan after an external switch
(i.e., light switch) supplies control signal to the input terminal LT. After control voltage is off, the transformer
continues to supply voltage to the fan within the time period set with the timer.
TRF-220/12-25 KTH - the transformer supplies voltage to the connected fan after an external switch
(i.e., light switch) supplies control signal to the input terminal LT or if indoor humidity exceeds the set point.
After control voltage is off or after humidity drops down below the set point, the transformer continues to
supply voltage to the fan within the time period set with the timer.
TRF-220/12-25 KTP - the transformer supplies voltage to the connected fan after motion detection at the
distance from 1 to 4 m with the horizontal viewing angle of 100°.
After no more motion is detected, the transformer continues to supply voltage to the fan within the time
period set with the timer.
To adjust the power voltage supply turn-off delay time from 2 to 30 minutes, turn the control knob T
clockwise to increase and counter-clockwise to decrease the turn-off delay time respectively, fig. 16.
To adjust the humidity set point from 60% up to 90%, turn the control knob H clockwise to increase and
counter-clockwise to decrease the humidity threshold respectively, fig. 16.
4

Warning! The transformer circuit is under mains voltage. Disconnect the product from power mains prior to
any adjustment operations. The delivery set includes a specially designed plastic screwdriver for the
transformer settings adjustments. Use the screwdriver to change the turn-off delay time or the humidity
set point.
Do not use a metal screwdriver, knife, etc. for adjustment operations not to damage the circuit board, fig. 16.
MOUNTING
The transformer is designed for wall surface mounting and is fixed with screws and dowels supplied with
the product. Do not install the transformer in humid environments.
The transformer and domestic fan mounting example is shown in fig. 2.
The transformer mounting sequence is shown in fig. 5-10.
The wiring diagram is shown in fig. 11-15.
The TRF 200/12-25 KV model is shown in fig. 15.
MAINTENANCE
Clean the product from any dust and dirt which may accumulate on the surfaces once in 6 months, fig. 17-19.
Disconnect the transformer from power mains prior to any maintenance operations.
To clean the transformer use a soft cloth and a brush wetted in a neutral detergent solution.
Avoid water dripping on the electric components, fig. 20. Wipe the surfaces dry after cleaning.
TRANSPORTATION AND STORAGE RULES
Transportation is allowed with any vehicle provided that the product is protected against mechanical and
weather damage.
Store the delivered product in the manufacturer's original packing box in a dry ventilated premise.
The storage environment must not contain dust, acid or alkali vapours that may cause corrosion of the
product parts.
5

MANUFACTURER'S WARRANTY
The product is manufactured at the factory of “Ventilation systems” PrJSC (hereinafter referred to
as the Manufacturer).
By purchasing this product the customer confirms to have read and agreed to the terms, rules and
requirements related to operation, storage, transportation, mounting, adjustment, connection, maintenance
and repair as well as warranty obligations with respect to this product as set forth in the manufacturer's
accompanying documentation to the product.
The manufacturing company sets forth the warranty period (service life) of the product as 12 months
following the sale date via retail network subject to the customer's ensuring compliance with the rules of
transportation, storage, mounting and operation of the product.
In case of any malfunction of the product through the fault of the Manufacturing company within the warranty
period (service life), the customer shall have the right to elimination of the manufacturing defects by means
of warranty servicing performed free of charge.
The warranty servicing implies performance of activities related to elimination of defects in the product aimed
to provide intended use of the product by the customer. The defects are eliminated either by replacing or
repairing such a product or a part (component) thereof.
NOTE: with the purpose of performing warranty servicing you please produce User Manual or other
relevant substituting document and the payment document as an evidence of the purchase with
indication of the sale date. The product model shall comply with that one specified in the User Manual
or other relevant substituting document.
With the purpose of performing warranty servicing please contact the trade company where you purchased
the product. If warranty servicing on the spot proves impossible, you will be provided with the necessary
information regarding rendering of this service.
Manufacturer's warranty shall not apply in the following cases:
in case the customer fails to provide the product in complete according to the package contents specified in
the User Manual or other relevant substituting document, including any components disassembled by the
customer;
in case of incompliance of the model or marking of the product with data specified on the product packaging
and in the User Manual or other relevant substituting document;
in case of non-timely technical maintenance of the product by the customer (dust, mud, oil condensate,
foreign particles);
in case of causing external damage to the product by the customer ('damage' shall not apply to external
changes of the product required for the product mounting);
6

in case of altering the product design or further reworking of the product;
in case of replacing and using parts, units and components of the product not prescribed by the
manufacturing company;
in case of other use of the product other than intended use;
in case of the customer's violating product operation rules;
in case of connecting the product to electric mains of voltage exceeding voltage value specified in the
user's manual;
in case of step voltage that resulted in the product failure;
in case of the customer's performing unauthorised repair of the product;
in case of performing repair of the product by third persons unauthorized by the manufacturing company;
in case of warranty period (service life) expiry;
in case of the customer's violating transportation rules assuring prevention of damaging and/or destruction
of the product;
in case of the customer's violating product storage rules;
in case of performing unlawful actions by third persons with respect to the product;
in case of force majeure (fire, flood, earthquake, war, hostilities of any kind, blockade);
in case of absent seals, provided such seals are prescribed by the User Manual or other relevant
substituting document;
in case of unavailable warranty card;
in case of unavailable payment document to confirm the purchase with indication of the sale date.
The manufacturing company shall be responsible for defects arising through its fault prior to the moment
of transferring the product to the ownership of the customer.
The manufacturing company shall not be responsible for defects arising after transferring the product to the
customer and caused by the customer's violating the rules of transportation, storage, assembly and
operation of the product, or by actions of third persons, an accident or force majeure circumstances.
The manufacturing company shall not be responsible for damage to health and property of the customer
caused by the customer's violating the User Manual or other relevant substituting document; other use
of the product by the customer other than its intended use, or by failure of the customer to comply with
warnings and other information on the product specified in the User Manual or other relevant substituting
document, or by the customer's violating the rules of transportation, storage, mounting, maintenance and
operation of the product.
7

1
2
162
80
63
8

L
N
3
4
1 - input terminal block;
2 - output terminal block;
3 - step-down transformer;
4 - fuse;
5 - wire clamp.
6 - built-in switch
(only for TRF-220/12-25 KV)
2
5
3
1
4
5
6
2
5
3
4
1
5
6
9
TRF-220/12-25 K
TRF-220/12-25 KV
TRF-220/12-25 KT
TRF-220/12-25 KTH
TRF-220/12-25 KTP
1 - input terminal block;
2 - output terminal block;
3 - step-down transformer;
4 - fuse;
5 - wire clamp.
6 - circuit diagram.

5
9
7
6
8
10
10