Vera Control VeraSecure User manual

VeraSecure
Advanced Smart Home Security Controller

Congratulations!
Welcome to Vera Smarter Home Control. The VeraSecure
Advanced Smart Home Security Controller provides security you can
count on, plus safety and convenience.

What’s In The Box
VeraSecure Controller
AC Power Adapter Ethernet Cable
LED Names
Power
Internet
Wi-Fi
Z-Wave
Service
ZigBee
Bluetooth
VeraLink*
Cellular
* VeraLink Protocol is either 345MHz (US) or 433MHz (EU) .
2-Way Audio Button
Press to activate 2-way audio intercom to speak with emergency
dispatch (requires optional monitoring service.)
Siren
Automatically emits a piercing alarm if there’s a security breach.
Microphone
Enables hearing what’s going on in your home from anywhere,
via the Vera app.
Battery Backup
If AC power goes out, this built-in Backup Battery will continue to
power VeraSecure for up to 8 hours to keep your home protected.
3G Cellular
If Internet goes out, the cellular data backup connection enables
VeraSecure to continue sending emergency alerts, notifications,
and also change home modes.
Antenna
External antenna extends the range of 345 (US)
or 433 (EU) MHz protocol.
Controller Features
1
2
4
7
3
6
5
8
9
For more information on these controller features go to:
www.getvera.com/controllers/verasecure
VeraLink Protocol is either 345MHz (US) or 433MHz (EU) .
Mic
Select
Sync
Reset
2-Way Audio
LED NamesLED Names

Installation
Firmly connect the provided Ethernet Cable from your
VeraSecure to your Wi-Fi router (or other Internet source).
To setup your controller, go to http://home.getvera.com
If you are a new user, click the “I have a new controller”
button on the screen. Agree to the terms and conditions.
Then select your Controller.
If you already have an account, please login.
Click the “Add another controller” button.
Then select your Controller.
Follow the Setup Instructions.
Firmly connect the AC Power Adapter to VeraSecure
and plug it into an AC outlet. VeraSecure has no on/off
switch. It will power up as soon as you plug in
the AC adapter.
13
2
USBAntenna Ethernet Power

Overview
There are over two thousand devices that can work with VeraSecure.
VeraSecure Home Controller is the central hub for creating security or
smart home scenes. Scenes give you the power to simply and easily customize
your Vera controller to work with devices exactly the way you want.
Combine devices such as cameras, lighting and sensors
to personalize your system’s scenes.

SECURITY DEVICES
They are always on and monitoring your home. However, your VeraSecure
system will only report a breach if the sensor is in the “Armed” status. Normally,
these sensors are “Armed” in Night, Away and Vacation modes as default
settings. (You may change these defaults in the Settings section of the
Vera dashboard app.)
Wi-Fi Cameras (Indoor & Outdoor)
Door / Window Sensors
Motion Detectors
Glass Break Sensors
Outdoor Alarm
Help Scare Away Intruders
Go to www.getvera.com/scenes for more ideas
Vera Controller Wi-Fi Camera with
Motion Detection
Automatic light and alarm
sounds with recording
=+
| Device Types

SAFETY DEVICES
Use these for home protection and peace of mind even when away from home.
Safety devices are always active and “Armed” regardless of which mode your
VeraSecure system is in. If a problem arises, you need to know about it,
regardless of whether you’re home, away, asleep or on vacation.
Smoke Detectors
Carbon Monoxide Detectors
Flood Sensor
Temperature & Humidity Sensors
Find Out Instantly When
Problems Occur
Go to www.getvera.com/scenes for more ideas
Vera Controller Flood Sensor You’re notified when a
water leak is detected
=+

CONVENIENCE & LIFESTYLE DEVICES
Use these devices to save energy and money. Eliminate the repetitive tasks in
your life like turning lights off, adjusting the thermostat, double checking to make
sure the garage door is closed or the daily adjustments of window coverings.
Thermostats
Door Locks
Light Dimmers & Switches
Garage Door Openers
Temperature & Humidity Sensors
Warm Or Cool Your House
While You’re Driving Home
Go to www.getvera.com/scenes for more ideas
Vera Controller Z-WaveThermostat Always the perfect
temperature when
you arrive!
=+
Light Sensors
Lawn Sprinklers
Window Curtains
HVAC Vents
Room Air Conditioners
72°

Vera App
The Vera App controls your entire VeraSecure system, including
all the devices working individually or together. Even if a device has its own app,
you won’t need it—use the Vera app instead.
The free Vera app runs on smartphones (iOS and Android), tablets, or in
a browser on any Windows, Mac, Chromebook or Linux computer. You don’t
have to choose between them—use your computer when home and your
smartphone when away. VeraSecure will continue running 24/7 to monitor
your home, regardless of whether you have the app open.

| Modes | Users
KEY FEATURES OF VERA APP
| Cards | Notifications
Modes are a powerful feature that lets you control all
your devices at once. There are 4 Modes—Home, Away,
Night and Vacation. You can customize how
each Mode works.
Your Vera system can have as many users as you like.
Everyone in your family, or everyone who works in your
small business can have a different username and
password. The Vera app lets you set permissions
and notifications for each user.
The Current Status Card displays at the top of the
Dashboard and offers a quick check of overall
Vera system status. You don’t have to check each
window sensor to know that all windows are closed
and the alarm system is “Armed”, for example.
Your Vera system can send you a text or email alert to
notify you (and other users) of just about anything that
happens in the system, such as when a door or window
opens, a motion detector trips, someone unlocks the
door, a smoke detector trips, and much more!
For more information on setting up notifications, go to:
http://support.getvera.com