Veracity VPSU-POE-1000 User manual

Installation GUIDE
1kW Power Supply | VPSU-POE-1000
Version 1.3

VERACITY 1kW POWER SUPPLY INSTALLATION GUIDE | V 1.3 | 2022 | 2
Contents
A) Quickstart Guide Legends 3
B) Safety Instructions 4
C) Product Package Contents 5
D) Hardware Overview 6
E) Installation 7
F) Troubleshooting 8
Veracity UK Ltd
Prestwick International Aerospace Park
4 Dow Road
Prestwick
UK
KA9 2TU
Veracity's Authorised Representative in the EU (as required by EU law for CE marked goods) is:
EU Authorised Representative: Comply Express Unipessoal Limitada, StartUp
Madeira, EV141, Campus da Penteada, 9020 105 Funchal, Portugal

VERACITY 1kW POWER SUPPLY INSTALLATION GUIDE | V 1.3 | 2022 | 3
A) Quickstart Guide Legends
The Information icon highlights particularly useful information or items which are very important to note when using
or configuring the product.
The Caution icon indicates possible actions or procedures which could prevent proper operation or cause a
system malfunction and the associated text will explain how to avoid this.
The Warning icon highlights important basic safety issues which if ignored may have the potential for damage to
the hardware, property damage, personal injury or even death.
Users are advised to read the safety information before connecting and using the product.
References to further product information are listed at the end of this guide or may be downloaded from the
Veracity website www.veracityglobal.com. Refer to these resources for full product information, information about
terms and conditions of use, limited warranties, returns, software licence agreements, environmental and recycling
procedures, and any other regulatory notices.
Information in this guide is subject to change without notice.
This document is copyright © 2022 Veracity UK Ltd, all rights reserved.

VERACITY 1kW POWER SUPPLY INSTALLATION GUIDE | V 1.3 | 2022 | 4
B) Safety Instructions
These safety instructions are important and are provided to help prevent equipment damage and injury to
the installers and operators of the system. Please read and understand all these instructions before
connecting and switching on the product
The product shall be installed by a trained professional.
The product shall be used in compliance with local laws and regulations.
Do not use a damaged power cable with the product. If the cable is cut, damaged, severely twisted, or if the
plug is loose, replace the power cable with a new one.
Do not place liquids (e.g., tea, coffee etc.) on top of the product. Specifically, do not spill any liquids
onto or into the product. If this happens, immediately switch off the power at the wall outlet and
disconnect all cables from the unit.
Do not handle the product or the power cable with wet hands. This could result in electric shock and even
death.
Do not insert any items into the air vents or openings anywhere on the unit. To do so may cause damage to
fans and other components, may cause the system to malfunction and may result in electric shock and even
death.
Use the correct tools when installing the product. Use of excessive force could damage the product and
expose hazardous voltages.
Use the product only with the equipment it is specified for.
Repair and service of the product shall be provided by Veracity or an authorised third party. Do not attempt
to repair the product by yourself.
Ensure that the product is securely held, at all times as dropping the product will almost certainly damage it
(possibly beyond repair) and more importantly, may cause severe personal injury, especially to hands and feet.
Extreme caution is essential.
This equipment is not suitable for use in locations where children are likely to be present.
Use the original packaging or equivalent, when transporting the product, to minimise the chance of damage.

VERACITY 1kW POWER SUPPLY INSTALLATION GUIDE | V 1.3 | 2022 | 5
C) Product Package Contents
Carefully unpack the package contents, consisting of the following:
| Power supply unit.
| 19” Rackmounting bracket.
| 19” Rackmounting screw kit.
| M4 x 8mm x 4 countersink screws for attaching power supply to mounting bracket.
| Mains Cable (IEC C13 style)
| 400mm DC power patch cables x 4
| This Installation Guide.

VERACITY 1kW POWER SUPPLY INSTALLATION GUIDE | V 1.3 | 2022 | 6
D) Hardware Overview
1. Power LED
2. >20% Power LED
3. >40% Power LED
4. >60% Power LED
5. >80% Power LED
6. Maximum Power warning LED
7. AC Power input connector
8. DC Power output connectors
LED Indicators
LED
Colour
Description
Power LED
Green
Output power on.
20, 40, 60% LEDs
Green
Display of approximate power
delivery.
80% LED
Amber
Warning LED for exceeding 80%
of capability.
Maximum Power LED
Red
Maximum power capability
exceeded.
Power Connectors
AC Connector. IEC C14 inlet. Use supplied mains cable.
DC Connector. Molex micro-fit style. Use supplied patch cables.

VERACITY 1kW POWER SUPPLY INSTALLATION GUIDE | V 1.3 | 2022 | 7
Specifications
Input Voltage
100-240 V AC
Input Frequency
50 / 60 Hz
Input Current
11A Max
Output Voltage
57V DC
Output Current Max
17.5A
Operating Temperature
0 to 40 ° C (32 °F to 104 °F)
Storage Temperature
-10 °C to 70 °C (14 °F to 104 °F)
E) Installation
Note that the 1kW Power Supply is designed for use with Veracity HIGHWIRE Base 4 (VHW-HWPS-B4)
and Base 8 (VHW-HWPS-B8) devices as well as LONGSPAN Base 8 (VLS-LS-B8), while installed in the
associated Tray Base chassis (VRM-TRAY-BASE).
The recommended installation procedure is as follows:
1. Attached PSU to rackmount bracket using 4 x M4 x 8mm countersink screws.
2. Attach patch cables to PSU as required.
3. Mount PSU and bracket to rack using supplied rackmount screw kit.
4. Install Veracity HIGHWIRE or LONGSPAN equipment into Tray Base unit.
5. Attach patch cables to Veracity equipment as required.
6. Mount Tray Base assembly into rack.
7. Attach power cable to the PSU and apply power. Ensure the power display provides an indication of
appropriate power consumption.
Note, A single rackmounting bracket is designed to hold up to 2 PSUs. In which case they should both
be assembled to the bracket before installation into the rack.

VERACITY 1kW POWER SUPPLY INSTALLATION GUIDE | V 1.3 | 2022 | 8
F) Troubleshooting
As the majority of issues for a PSU are related to connectivity or overload situations, please ensure all
cabling is connected as required and the system power consumption is not exceeded.
i. No Green Power LED.
a. Mains Cable disconnected.
b. Supply Fuse has blown.
ii. Equipment not powered.
a. Patch cables not securely attached between PSU and associated equipment.
iii. Equipment power cycling.
a. Check PSU power meter for overload situation.
b. Disconnect equipment individually to determine faulty unit.