Verilux HappyLite Mini Plus VT01 User manual

VT01
=VeenA^iZB^c^
Hjch]^cZHjeeaZbZciA^\]iHnhiZb
0,5
3

1
Dear Customer,
Thank you for purchasing the Verilux®HappyLite®Mini Plus
Sunshine Supplement Light System. You have received an
innovative and quality manufactured product, backed by a one-
year limited warranty. As a Verilux®customer, your satisfaction
means everything to us. We look forward to serving you now and
in the future.
This product brings healthful Natural Spectrum®Daylight into
your home or office. Many other healthy lighting products are
available through our catalog and online. To request a free copy
of our catalog, call our toll-free number 1-888-544-4865. You
may also visit us on the web at www.Verilux.com to learn more
about all our quality Verilux®products.
Have a Bright Day!
Nicholas Harmon
President and CEO

2
CAUTION:
• TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
DISMANTLE. THERE ARE NO SERVICEABLE PARTS INSIDE.
• TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS UNIT TO RAIN OR MOISTURE.
The exclamation point within an equilateral triangle alerts
the user to the presence of important operating and
maintenance instructions in this owner’s guide.
WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR
PERSONAL INJURY:
• Turn off/unplug and allow to cool before replacing bulb or cleaning.
• Do not look directly at the lighted bulb without the diffuser being in
place.
• Do not operate the lamp in close proximity to flammable or
combustible vapors, such as aerosol (spray) products or where
oxygen is being administered.
• Use only the type of bulb and maximum wattage indicated by
Verilux®.
• Never cover the lamp when it is in operation.
IMPORTANT SAFETY INSTRUCTIONS

3
1. Read these instructions – before using this lamp.
2. Keep these instructions – for future reference.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this lamp in damp/humid or wet locations.
6. For indoor use only.
7. Clean only with dry cloth.
8. Do not block any ventilation openings.
9. Do not place near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
10. Do not defeat the safety purpose of the polarized plug. A polarized
plug has two blades with one wider than the other. The wider blade
is provided for your safety. If the provided plug does not fit in your
outlet, consult an electrician for replacement of the obsolete outlet.
11. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where it exits the lamp.
12. Only use attachments/accessories specified by the manufacturer.
13. Unplug this lamp during lightning storms or when unused for long
periods of time.
14. If the lamp has been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled or objects have
fallen onto the lamp, the lamp has been exposed to rain or moisture,
does not operate normally, or has been dropped, it should not be
operated. There are no user serviceable parts within this lamp.
SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS

4
GENERAL PRECAUTIONS
• Do not use with power supply voltage other than 120V AC
• Avoid placing the lamp in areas that are dusty, humid/moist, lack
ventilation, or are subject to constant vibration.
• Not for use with light dimmers, timers, motion detectors, voltage
transformers, or extension cords.
• Do NOT use lubricating agent in bulb assembly.
• Close supervision is recommended when this lamp is used by or
near children, or others who may not understand the need for these
precautions. Do not leave the lamp unattended during use.
This lamp has been tested and found to comply with Part 18 of the
FCC Rules. These limits are designed to provide reasonable protection
against interference in a residential installation. This lamp generates,
uses, and can radiate radio frequency energy and, if not used in
accordance with the instructions, may cause interference to radio
communications. If interference occurs try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the lamp and receiver.
• Connect the lamp into an outlet on a circuit different from that to
which the receiver is connected.
• Move the lamp out of the line of sight of the remote control receiver.
• Consult the dealer or an experienced radio/TV technician for help.
Verilux, Inc. does not make any medical claims.
Please consult a qualified physician before using
any bright light system.

5
SET-UP INSTRUCTIONS
Unpacking
Please remove all packaging material. Check the carton for the items
pictured below:
Selecting a location
• Place your Verilux®HappyLite®Mini Plus Sunshine Supplement
Light System on a table or other flat surface.
Note: Avoid placing this lamp in areas that are exposed to direct
sunlight or close to heat-radiating products, such as heaters. Do not
place the lamp on the top of appliances that radiate heat.
WARNING: DO NOT BLOCK VENTS
Vents are necessary for proper function of the electronic
ballast; blocking them may cause overheating of the
electronics and increase risk of fire.
Bulb
Diffuser
Lamp

HappyLite
6
SET-UP INSTRUCTIONS
Bulb & Diffuser installation
1. Insert bulb into lamp by firmly holding bulb base and pushing down
and rotating slightly in a clockwise direction to seat properly
(See below)
Note: Make sure bulb is fully inserted into the socket. The bottom of
the bulb base should touch the plastic housing of the lamp.
2. Attach the plastic diffuser to the lamp body by first inserting the tab
located at the bottom of the diffuser (A) into the opening of the lamp
base (B).
3. Rotate the plastic diffuser and align the side snap tabs (C) into
position – press firmly to snap parts together.
Note: When first illuminated, bulb will need to “age” for about 10
minutes in order to attain its proper brightness and color
A
B
C

7
BULB REPLACEMENT
Bulb removal and replacement
1. Unplug lamp from power source.
2. To access the bulb, remove the plastic diffuser by depressing the
tabs (D) and lifting it out.
3. Firmly hold the bulb base (B) (Do not hold the glass portion of the
bulb) and turn bulb in a slight counter-clockwise direction until it
releases from the socket.
4. To re-install bulb and plastic diffuser, see instructions on page 6
D
B

8
TROUBLESHOOTING
Before requesting service on your Verilux®lamp please read the
following:
• Make sure all power connectors, cords, and plugs are inserted fully
and securely.
• Be sure the bulb is securely seated in the socket. (See page 6)
• Make sure there is power to the wall outlet or try another outlet – not
connected to a dimmer.
CARE & CLEANING
Your Verilux®lamp is made from high quality materials that will last for
many years with a minimum of care.
Clean only with a soft dry cloth – DO NOT USE SOLVENTS OR
CLEANERS CONTAINING ABRASIVES OR AMMONIA
WARNING: To prevent risk of shock or personal injury
when cleaning lamp, make sure you have turned off and
unplugged the lamp, and allow sufficient time for the bulb
to cool.

Please visit our web site at:
www.Verilux.com
Call our Customer
Service Department at
1-888-544-4865
(Representatives are available
8 a.m. – 10 p.m. M – S
9 a.m. – 8 p.m. Sunday Eastern)
340 Mad River Park
Waitsfield, VT 05673
VT01-MAN-Rev3
Printed in China for: Verilux, Inc.
© Copyright 2008 Verilux, Inc. All rights reserved.