Verizon Jetpack 7730I Mifi User manual

Choose 2Rent
Phone [phone]
Fax [phone]
[e-mail]
www.choose2rent.com
version C2R-1 2018
page 1 of 2
Verizon Jetpack 7730I Mifi
Setup Guide
Power on your Jetpack by pressing and holding the power button until the
display lights and Home scren displays
Connection Option 1:
Manual SSID Wifi Connection
1. Connect your device to the SSID/Password provided on the back label
2. You can also view SSID/Password information by
3. Tap Menu to display a list of Menu options
4. Select Wi-Fi
5. You can also view this information on the label located in back of the
MiFi

page 2 of 2
Connection Option 2:
WPS Connection
1. Tap Menu to display a list of Menu options
2. Select Wi-Fi
3. Select Wi-Fi Protected Setup (WPS)
4. Select Join Primary Network
5. Select Push Button to begin pairing
6. Go to desired device and select WPS to pair both devices
7. A message will appear stating Device connected as soon as the device
pairs
You can confirm a device has been connected by navigating to the
Connected Devices Menu
Charging Your Verizon Jetpack
Use the QuickCharge power adapter and plug the small USB (Type-C) end
into the bottom of the Jetpack. Plug the large USB into the provided USB
adapter and plug into the wall socket.
Please note: If you are charging the Jetpack while using the network data, you must enable
on the screen Internet access via USB and Wi-Fi to continue to use data. If this is not
enabled, your Wi-Fi connection will drop.
Please call our support team if you need assistance
setting up your rental devices
1(800) 622-6484