verotti ET.200X User manual
WALL FACED
INTEGRATED INTELLIGENT WC INSTALLATION
Apply to ET.200X, ET.200S, IN.200X
Important Notice
V
&
°
&
Parts List
1/2
C
Remote Control
�
& Caution Remote Control Installation
❖
Installation ols (not supplied)
I 0o2 MS @
chnical Drawing
l✓
Minimum space
0 °
E
·
o@
Electrical Requirements
MUST BE ADHERED
1. The electrical components of the Verotti Intelligent Toilet must be protected by a 10A RCD
and a 10A magnothermic switch. Both switches MUST be placed outside of the bathroom.
2. A fixed power connection must be connected by a dedicated flexible power cable consisting
of 3 wires (active, neutral and earth) of a least 1mm2. The connection must be done inside an
IPX4 or better junction box. If it is necessary to replace the power cable, this must be
completed by a qualified person.
NOTE: Any electrical work conducted on this product must be installed by a qualied person in accordance with
AS/NZ 3000 Wiring Rules.
Please consult with a qualied electrician to conrm an appropriate installation location.
No additional electrical equipment should be tted inside the WC.
This product (IPX4) shall not be exposed to water jets for cleaning purposes.
According to current legislation
THIS MUST BE INSTALLED OUTSIDE
OF BATHROOM
3 x 1mm2
L min. = 400mm
Min Ø6mm
Max Ø8.5mm
DANGER
10A
10A lDn 0.01A
Toilet Installation
Confirmation before installation
/
P
(
)
& DANGER
1-4
1-1
12
4
(L)
4
(L)
Check Valve
Check Valve
4
(L)
male
FFL
IPx4
1-12
1-9
1 11
1-15
,,
Remote Control Installation
2-2
2-1
2-3
Add. Building M, 61-65 Roberts Road
Greenacre NSW 2190 Australia
Tel: 1300 837 688
Fax: 1300 837 688
Email: [email protected]
Website: www.verotti.com
This manual suits for next models
2
Table of contents
Other verotti Toilet manuals
