VersaTables Edison User manual

VersaTables.com
14105 Avalon Blvd.
Los Angeles, CA 90061
Sales:
Customer Service:
Call: 800-416-3961 Call: 424-244-2155
[email protected]
Proudly Made in the USA
Call: 310-353-7100
Fax: [phone]
delete and insert product glam shot
VersaTables.com
American Made & Guaranteed for Life
How can we improve our assembly instructions?
Your comments and suggestions are important to us.
Please e-mail us at: [e-mail].
Revised: 05-02-14
Edison Electric Table - ELE-TB Assembly Instructions

VersaTables.com
14105 Avalon Blvd.
Los Angeles, CA 90061
Sales:
Customer Service:
Call: 800-416-3961 Call: 424-244-2155
[email protected]
Proudly Made in the USA
Call: 310-353-7100
Fax: [phone]
ELE-TB
Main Surface
Qty:1
Cross Support
Qty:1
Cable Management Clip
Qty:8
Power Cord
Qty:1
Kick Panel
Qty:1
Wire Clip
Qty:1
Patch Cord
Qty:2
Control Box A
Qty:1
Leg
Qty:2
4mm Allen Wrench
Qty:1
Actuator
Qty:2
Caster
Qty:4
M6 Screw
Qty:16
3/4 Phillips Pan Head
Screw
Qty:20
20mm Furniture Bolt
Qty:8
1/4”- 20 Phillips Head
Bolt
Qty:10
Edison Electric Table Hardware List
Under Frame
Qty:1
Cross End Cap
Qty:2
Controller
Qty:1
Control Box B

VersaTables.com
14105 Avalon Blvd.
Los Angeles, CA 90061
Sales:
Customer Service:
Call: 800-416-3961 Call: 424-244-2155
[email protected]
Proudly Made in the USA
Call: 310-353-7100
Fax: [phone]
ELE-TB
Caster
Kick Panel
Leg
Cross Support Actuator
Control Box
Under Frame
Cross End
Cap
Control
Button
Additional
Tools Required
Main Surface
Edison Electric Table Exploded View
Phillips Screw Driver

VersaTables.com
14105 Avalon Blvd.
Los Angeles, CA 90061
Sales:
Customer Service:
Call: 800-416-3961 Call: 424-244-2155
[email protected]
Proudly Made in the USA
Call: 310-353-7100
Fax: [phone]
ELE-TB
Edison Electric Table Assembly Step-by-Step
Step
1a
Control Box A
3/4 Phillips Pan
Head Screw
Fasten Control Box to the Main Surface using (4) Phillips Pan Head Screws.
Sockets should face towards the front of the table.
Qty:4 3/4 Phillips Pan
Head Screw
Step
1b
3/4 Phillips Pan
Head Screw
Control Box B
Fasten Control Box B diagonally to the Main Surface using (2) Phillips Pan Head Screws.
The power socket should face towards the front of the table.
Qty:2
3/4 Phillips Pan
Head Screw
Control Box A
Control Box B

VersaTables.com
14105 Avalon Blvd.
Los Angeles, CA 90061
Sales:
Customer Service:
Call: 800-416-3961 Call: 424-244-2155
[email protected]
Proudly Made in the USA
Call: 310-353-7100
Fax: [phone]
ELE-TB
Step
4Control Button Cable
Run Control Button Cable through Under Frame.
Edison Electric Table Assembly Step-by-Step
Step 3Controler
Attach the Controllerto Main Surface using (2) Phillips Pan Head Screws.
3/4 Phillips Pan
Head Screw
3/4 Phillips Pan
Qty:2

VersaTables.com
14105 Avalon Blvd.
Los Angeles, CA 90061
Sales:
Customer Service:
Call: 800-416-3961 Call: 424-244-2155
[email protected]
Proudly Made in the USA
Call: 310-353-7100
Fax: [phone]
4
Fasten Under Frame to Main Surface using (8) 1/4-20 Phillips Head Bolts.
Step ELE-TB
Under Frame
Step
5
Patch Cord
Patch Cord
Connect a Patch Cord to each Actuator.
Qty:2
Patch Cord
1/4-20 Phillips
Head Bolt
Qty:8
1/4 - 20 Phillips
Head Bolts
1/4 - 20 Phillips
Head Bolts
Edison Electric Table Assembly Step-by-Step

VersaTables.com
14105 Avalon Blvd.
Los Angeles, CA 90061
Sales:
Customer Service:
Call: 800-416-3961 Call: 424-244-2155
[email protected]
Proudly Made in the USA
Call: 310-353-7100
Fax: [phone]
Step
ELE-TB
Actuators
Block
Step Actuators
M6 Screw
M6 Screw
Qty:4
Edison Electric Table Assembly Step-by-Step
If Actuators have a block on the
tube, make sure the block facing
the back on both of them.
6
Insert Actuators into sides of Under Frame.
NOTE:
7
Secure Actuators to Under Frame using (2) M6 Screws on each Actuator.

VersaTables.com
14105 Avalon Blvd.
Los Angeles, CA 90061
Sales:
Customer Service:
Call: 800-416-3961 Call: 424-244-2155
[email protected]
Proudly Made in the USA
Call: 310-353-7100
Fax: [phone]
8
Make sure Actuators and Control Button are connected to Control Box.
Step ELE-TB
Plugging in
3/4 Phillips Pan
Head Screw
Main Power Plug
Control
Button
Qty:1
Patch Cord
Actuator Actuator
Patch Cord
Control
Button Power
Cord
Left
Actuator Plug
Step Wire Clip
3/4 Phillips
Pan Head
Screw
Right
Actuator Plug
Actuators
on each Actuator.
Snap Cross End Cap into Under
Frame and then fasten.
M6 Screw
Edison Electric Table Assembly Step-by-Step
9
Secure Actuators by attaching the Cross End Caps and using (2) M6 Screws
M6 Screw
Qty:4
3/4 Phillips Pan
Head Screw
3/4 Phillips Pan
Head Screw
Qty:8

VersaTables.com
14105 Avalon Blvd.
Los Angeles, CA 90061
Sales:
Customer Service:
Call: 800-416-3961 Call: 424-244-2155
[email protected]
Proudly Made in the USA
Call: 310-353-7100
Fax: [phone]
10
Attach Legs to Actuators using (4) M6 Screws on each Leg.
11
Attach Kick Panel to Actuators using
Step ELE-TB
Legs
Step Kick Panel
20mm
Furniture Bolt
Qty:4
(2) 20mm Furniture Bolts on each side.
Screw Bolts Half way on one side first to hold up Kick
Panel, then screw in the other side and tighten.
20mm
Furniture Bolts
M6 Screw
Qty:8
M6 Screw
Edison Electric Table Assembly Step-by-Step

VersaTables.com
14105 Avalon Blvd.
Los Angeles, CA 90061
Sales:
Customer Service:
Call: 800-416-3961 Call: 424-244-2155
[email protected]
Proudly Made in the USA
Call: 310-353-7100
Fax: [phone]
ep 12
Casters
Attach Casters to Legs.
Caster
Qty:4
ELE-TB
St
Step Cross Support
20mm
Furniture Bolts
20mm
Furniture Bolt
Qty:4
Edison Electric Table Assembly Step-by-Step
13
Attach Cross Support using (4) 20mm Furniture Bolts.

VersaTables.com
14105 Avalon Blvd.
Los Angeles, CA 90061
Sales:
Customer Service:
Call: 800-416-3961 Call: 424-244-2155
[email protected]
Proudly Made in the USA
Call: 310-353-7100
Fax: [phone]
ELE-TB
Step 14 Test and Flip Over Table
Once assembled, the table needs to be plugged in and run all the way up and
down three times while upside down to calibrate the Actuators. Make sure all of
the Screws/Bolts are fully tightened and then flip the table over.
Table can be flipped over
and assembly is complete.
Plug it into a power
source
Edison Electric Table Assembly Step-by-Step

VersaTables.com
14105 Avalon Blvd.
Los Angeles, CA 90061
Sales:
Customer Service:
Call: 800-416-3961 Call: 424-244-2155
[email protected]
Proudly Made in the USA
Call: 310-353-7100
Fax: [phone]
ELE-TB
Instructions For Programming Controller With The Presets
How To Store a Memory Position
Favorite positions e.g. for sitting and/or standing can be stored. Follow the described
procedure.
How to store a position:
1. Drive Table’s surface to the height you wish to store.
2. Press ‘S’ and then the memory button you wish to store that height.
Your position has now been stored.
To recall your memory position, press the memory button until you reach the stored
position.
Images show 4 different height parameters stored on buttons. You can set your own.
Table Will Not Go Up Only Down.
The desk cannot drive up if it has not been initialized.
If display: error code E01
How to Reset:
1. Press down key and drive to the lowest position.
Hold the key until the desk stops completely.
2. Reactivate the down key and hold the key until the desk stops completely.
Now the desk can drive up. How can we improve our assembly instructions?
Your comments and suggestions are important to us.
Please e-mail us at: [e-mail].
Edison Electric Table Assembly Step-by-Step
How to reset your desk