VersaTables PowerLift PLCPUH User manual

Lifetime
Warranty
Quantity
Discounts
Assembled
in USA
Fast
Shipping
Local: 310-353-7100
Toll Free: 888-929-0322
Fax: [phone]
[e-mail]
Assembly InstructionsPowerLift® CPU Holder
PLCPUH
Contact us

Lifetime
Warranty
Quantity
Discounts
Assembled
in USA
Fast
Shipping
Local: 310-353-7100
Toll Free: 888-929-0322
Fax: [phone]
[e-mail]
Contact us
Tools Parts
Assembly
Phillips head driver
and/or hand drill 1/4-20 Phillips BoltCPU Holder Brackets
x8
x2
Lock Pin
x2
1/4-20 Phillips Bolt
x4
1/4-20 Phillips Bolt
x4
Using four (4) 1/4-20 Phillips Bolts, attach
the slide bracket onto the two brackets
from the previous step.
Attach the two (2) brackets to underside of
the desktop with four (4) 1/4-20 Phillips
Bolts, on the side of the desk you would
like the CPU holder to be on.
Step 1
Step 2
Slide Bracket
Assembly Instructions

Lifetime
Warranty
Quantity
Discounts
Assembled
in USA
Fast
Shipping
Local: 310-353-7100
Toll Free: 888-929-0322
Fax: [phone]
[e-mail]
Contact us
Slide the CPU holder into the Slide Bracket.
Be sure that the Carriage Screws are facing
the Inside of the CPU Holder and the Thumb
Nuts and Washers are facing Outside.
Use the Thumb Nuts to adjust the CPU
Holder to the desired size.
Step 3
Step 4
Pass the lock pins through
the Slide Bracket holes.
Step 5
Carriage Screw
Washer
Thumb Nut
Assembly Instructions