Versteel TOD TABLE User manual

2332 Cathy Lane
Jasper, Indiana
47546
800.876.2120
812.482.9318 Fax
www.versteel.com
Thank you for your purchase. Versteel®
hopes that you have many great years
of use from this table and from all of our
products. If you have quesons that
these instrucons don’t answer, please
call customer service at 800.876.2120.
TABLE TOP AND LEGS ASSEMBLY (1 QTY)
MODESTY PANEL (1 QTY)
UPRIGHT SUPPORT PLATE (2 QTY)
3/8” BOLT (2 QTY)
10-24 SCREW (6 QTY)
ASSEMBLY : STEP 2
FIND LOCATION A (SHOWN IN DIAGRAM 2)
ON YOUR TOP/LEG ASSEMBLY.
NOTE: DO NOT PULL HANDLE UNTIL ALL PARTS ARE INSTALLED AND TABLE IS UPRIGHT!
A
1
2
CONT’D
E
C
B
D
COMPONENTS:
A S S E M B L Y I N S T R U C T I O N S
:
T O D T A B L E
DOCUMENT CONTAINS 1 PAGE
ASSEMBLY : STEP 1
PLACE THE TOP/LEG ASSEMBLY FACE DOWN
ON THE FLOOR. (MAKE SURE THE FLOOR IS
CLEAN AND FREE OF ANY DEBRIS.) UNFOLD
THE LEGS, ONE AT A TIME, AS SHOWN IN
DIAGRAM 1.
NOTE: USE CAUTION WHEN UNFOLDING
LEGS! LEG IS NOT STABLE AND CAN FALL
UNTIL ALL PARTS ARE INSTALLED AND
TIGHTENED!
A
TOOLS REQUIRED:
7/32” ALLEN WRENCH
1/8” ALLEN WRENCH

B
3
5
4
ASSEMBLY : STEP 6
SHIFT MODESTY INTO SLOTS AND PUSH
TOWARDS TABLE TOP. TIGHTEN SCREWS
WITH 1/8” ALLEN WRENCH. (DIAGRAM 5)
ASSEMBLY : STEP 7
INSERT SCREWS INTO THE REMAINING
HOLE ON EACH SIDE OF MODESTY PANEL
AND TIGHTEN.
TURN TABLE UPRIGHT AND TEST HANDLE
TO ENSURE PROPER OPERATION.
ENJOY YOUR NEW VERSTEEL TABLE!
270.INS.TD 111
A S S E M B L Y I N S T R U C T I O N S
:
T O D T A B L E
B
ASSEMBLY : STEP 4
PLACE MODESTY PANEL BETWEEN TABLE
LEGS.
ASSEMBLY : STEP 5
INSERT TOP AND BOTTOM SCREWS INTO
INSIDE OF LEGS. ALIGN SLOTTED HOLES ON
ENDS OF MODESTY PANEL WITH SCREWS.
(LOCATION B IN DIAGRAM 4)
3/8” BOLT
UPRIGHT SUPPORT PLATE
DETAIL A
DETAIL B
10-24 SCREW
ASSEMBLY : STEP 3
STACK THE UPRIGHT SUPPORT PLATE AND
3/8” BOLT AS SHOWN IN DIAGRAM 3.
INSERT AND TIGHTEN WITH A 7/32“ ALLEN
WRENCH. DO NOT OVERTIGHTEN!
NOTE: TABLES 48” AND SMALLER HAVE
1 LARGE PLATE AND 1 SMALLER PLATE. THE
LARGER IS INSTALLED ON THE RIGHT LEG
(FROM THE USER SIDE).