14 15
Filter configuration Adjusting settings
Adjusting settings1st Filter(Carbon Filter) / 2nd Filter(Carbon Filter)
The filter life indicator consists of 5 sections of light for each filter. When the filter is ready to
change, all the sections of light will go off. An audio message will give a warning 10 days in
advance of filter replacement. When the filter indicator blinks, the filter must be replaced.
There are instances in which sediment and carbon filters should be changed separately
depending on the places of use or region.
Filter life will change depending on the region's water quality. If water flavor worsens or if the flow
rate slows down considerably, it is highly recommended to change the filter.
1
2
3
4
5
6
7
8
UF Filter (Optional) Sediment Filter (Optional)
Filter Replacement Notification
1. Felt
Filters large particulate matter out of the water.
2. Calcium
Slightly increases the alkaline mineral content in your water and
improves the taste of water and removes odors. It also eliminates chlorine.
3. Felt
Filters out rust and other large particles.
4. Activated Carbon
Coconut tree based activated carbon used to make water taste better
by eliminating organic compounds, bad smells and flavors as well as
foreign substances at the 18-50 mesh size.
5. Felt
Filters out rust and other large particles
6. Activated Carbon
Coconut tree based activated carbon used to make water taste better
by eliminating organic compounds, bad smells and flavors as well as
foreign substances at the 18-50 mesh size.
7. Felt
Filters out rust and other large particles.
8. Tourmaline
Tourmaline emits Far Infra Red(FIR) energy naturally. FIR produces well documented
health benefits and it also has an amazing effect on water. The Biostone contains the
semi-precious gemstone tourmaline in ceramic form, so you get FIR on tap!
To access the setting adjustment mode on your
ionizer, press and hold the Menu button for more
than 3 seconds, “AL1” appears on the ORP display
window and “0” appears on the pH display window.
1
2
3
Display and operation Instructions
1. UF(Ultra Fine) Filter
Hollow heavy duty fiber with pores
that will effectively filter down to
0.01M in size, removing bacteria and
other micro-organisms.
2. Felt
Filters out rust and other large
particulate matter from water.
3. Activated Carbon
Coconut tree based activated
carbon used to make water taste
better by eliminating organic
compounds, bad smells and
flavors as well as foreign
substances at the 18-50 mesh size.
4. Calcium
Slightly increases the alkaline
mineral content of your water and
improves the taste of water.
Helps also to eliminate chlorine.
5. Tourmaline
1
2
3
1Sediment Filter
The Sediment Filter reduces infusible
particles from feed water and protects
the membrane and pre-carbon filters
from being clogged with the largest
particles extending the life of the rest
of the filters.
4
5
Press the Alkaline button to cycle forward through
the different functions and press the Purifier button
to cycle backwards through the functions.
To adjust a specific function, cycle through the function
list until the specific function number you wish to change
appears in the ORP display window. To cycle forward
through the function settings, press the acidic button.
To cycle backwards through the function settings, press
the Filter Reset button. The function setting values will
appear in the pH display window.
Once all settings are made, select the MENU button to save
your settings. When changes are saved the ionizer will reset
to Acidic Level 3 indicating the changes were saved to
memory. Please be sure to reset to your preferred Alkaline
Water Level for drinking.
Note: There is no need to change any settings if
ionizer is working well.
Example of Language Function setting change (F09)
1. Press and hold the MENU button for more than 3 seconds.
2. “AL1” will appear on the display.
3. Press the ”Alkaline” button to cycle forward until F09 appears
in the ORP display window.
4. Press either the “Filter Reset” button to make the display number
go down and or the “Acidic” button to make the number go up
until you arrive at the language you want.
5. After the language is selected, press the “MENU” button to save
the selection."
