Veto 160m User manual

2.4'' High
Definition LED
Voice Record
MP4
16GB SD Card
Professional APP
with CAD Sketch
640 x 480
Video Record
2 million Pixels
and 4 times
Zoom Camera
2017-A5
160m 200m

CONTENTS
4
5
5
5
6
6
7
7
7
7
8
8
8
9
9
9
9
10
11
12
12
13
13
14
14
15
16
16
16
17
18
19
19
19
20
21
22
23
23
25
25
25
25
26
26
26
27
27
29
29
29
30
30
31
32
32
32
34
36
37
Auxiliary Function
• Digital Horizontal Bubble
• Camera Measuring Assistant
• Delay Measurement
• Staking-out
• Angle
Record
• Digital Horizontal Bubble
Media Function
• Camera
• Video
Menu
• Music
• Video
• Taping
• Picture
• System Settings
• Time
• Bluetooth
• Light
• About Us
APP
• Professional CAD Sketch
Connect to Computer
• Connect to PC
• Docs in SD card
Technical Information
Errors
Routine Maintenance
Packing List
Display
• Main Interface
• System Settings
Keyboard
• Keyboard
Battery
• Battery Installation
• Battery Charging
Power On/Off
Basic Settings
• Unit Setting
• Reference Point Setting
Function Description
• Single Distance Measurement
• Continuous Measurement
• Area Measurement
• Volume Measurement
• Pythagoras
1. Calculate the Vertical and Horizontal Distance
2. Calculate the Vertical Distance
3. Calculate the Hypotenuse
4. Calculate the Third Side of Triangle
5. Calculate a Length of Vertical Distance
6. Calculate the Area of Triangle
7. Right Trapezoid Measurement
Calculation
• Distance Addition
• Distance Subtraction
• Area Addition & Subtraction
• Volume Addition & Subtraction

Packing List
Laser distance meter Portable bag Hand StrapAA Rechargable Battery USB Connector
Reflector
User' s manual
2.4''High
DefinitionLED
VoiceRecord
MP4
16GBSD Card
ProfessionalAPP
withCAD Sketch
640x 480
VideoRecord
2million Pixels
and4 times
ZoomCamera
2017-A5
160m 200m
>1/4 S
Please read all of the operational guide and safety regulations in this manual before operation.
Improper operations without complying with this manual guided could cause damage to the
device, influence on measurement result or bodily injury to the user.
The instrument is not allowed to disassemble or repair in any ways. It is forbidden to do any illegal
modification or performance change for laser emitter. Please keep it out of reach of children and
avoid using by any irrelevant personnel.
It is strictly prohibited to shoot eyes or other parts of body with the laser; it is not allowed take the
laser to shoot any objects' surface with strong reflecting.
Due to electromagnetic radiation interference to other equipment and devices, please don't use the
meter in the plane or around medical equipment, don't use it in inflammable, explosive
environment.
Discarded batteries or meter device shall not be processed just like household garbage, please
handle them in line with related law and regulations.
Any quality issues or any questions on the meter, please contact local distributors or manufacturer
in time, we are ready to offer solutions for you.
Please read the safety regulations and operation guide carefully before operating.
Professional casts quality and good quality
gets reputation
Safety Regulations
Please check your accessories with below list.

Display
•Power
•Measuring Mode 1
•Measuring Mode 2
•Measuring Mode 3
•Main Display Area
•Items
•Laser
•Angle
•Reference Point
•Result Display 1
•Result Display 2
•Result Display 3
•Unit
•Bluetooth
•Measuring Mode
PIC 1 Main Interface
PIC 2 System Settings
•Option Box
•Backlight Time
•Laser lasting Time
•Power Off Time
•Sound
•Length Unit
•Angle Unit
•Self-calibration
Keyboard
Main Interface
System Settings
PIC 3 Keyboard
•Power On /
Measure
•Plus
•Area/Volume/
Pythagoras
•MENU •Staking-out/
Digital Bubble
•Reference Point/
Delay Measuring
•Equal
•Minus
•Camera
•Photo/Video
•Record •Power Off/
Clear off

Short press to Menu. Enter System Settings.
Press and to reach the item . Short
press to make the selection box green. Then
press and to select the unit you need. The
default unit is 0.000m. There are 8 different units
for options.
Reference point setting
The device get 4 different reference points. System default reference point is bottom.
Press to select the reference point.
Middle(Screw Hole)
Top
Bottom Tail-Board
Long press to start the device.
Long press to turn off the device. The device can also turn off automatically in 150s
without any operation. (150s is default value, user can set the time in the System Settings.)
Unit Setting
Battery Basic Settings
Power On/Off
Battery Installation
Battery Charging
Discharge the battery door, and place battery according to correct
polarity, then cover the battery door.
1.2V 2400mAh AA Ni-mh battery is recommended. A USB cable is
included in the accessories bag.
Please remove the batteries when the device is off work in order to
protect the device from corrosion.
The device is accompany with rechargeable batteries.
Please recheck if the batteries in the battery cabinet is rechargeable
batteries before you connect it to the power supply for charging. If
the batteries are not rechargeable, the device will not start charging.
The symbol will show in greening while charging. Heating is
normal while charging. Symbol means charging completed.

Area Measurement
Continuous Measurement
The user can use this mode to find the target distance without frequent operation.
1) Long press under distance measuring mode to start continuous measuring mode.
Maximum and Minimum value will be shown on the screen. Present result displays in
major display area.
2) Short press or to quit.
Short press button twice to .
Press button for one edge (W)
Press button for the second edge (L)
Press button for the third edge (H)
Function Description
Single Distance Measurement
1) Press under distance measuring mode, laser shoots and focus the target.
2) Press again to measure. It can show 4 results in 4 lines on the display, including
the bottom line newest result and 3 history results.
3) Short press to delete the history data.
Volume Measurement
Short press once to .
Press once for length;
Press again for width.
The device calculates the area and perimeter . Short press to clear off last
result and measure again when you make a wrong operation. Long press button to
save the result.
Device calculates the volume , base area , flank area and base perimeter .
Short press to check more results.Short press to clear off the last result and
measuring again when you make a wrong operation.Long press button to save the result.

Short press three times to .
Press to get the length of Hypotenuse c and angle α ;
The device calculates the vertical distance b and horizontal distance a .
Short press four times to .
press to get length of c;
press to get length of a;
The device calculates the vertical distance b .
Calculate the Vertical and Horizontal Distance
1
Calculate the Vertical Distance
2
1. Calculate the Vertical and Horizontal Distance
2. Calculate the Vertical Distance
3. Calculate the Hypotenuse
4. Calculate the Third Side of Triangle
5. Calculate a Length of Vertical Distance
6. Calculate the Area of Triangle
7. Right Trapezoid Measurement
User can choose different modes according to the condition by press .
Pythagoras
There are 7 Pythagoras calculations.

Calculate the Area of Triangle
6
Short press six times to .
press to get length of a;
press to get length of h;
press to get length of b;
The device calculates the length of c .
The device calculates the area of the triangle,
the angle α, and the perimeter of the triangle.
Press to check more results.
Calculate the Hypotenuse
3
Short press five times to .
press to get length of a;
press to get length of b;
The device calculates the length of Hypotenuse c .
Calculate the Third Side of Triangle
4
Calculate a Length of Vertical Distance
5
Short press seven times to .
press to get length of c;
press to get length of l1;
press to get length of a;
The device calculates the distance of l2 .
Short press eight times to .
press to get length of a;
press to get length of b;
press to get length of c;
Press to save the result.
Remark: If "ERR 5" shows in the display while measuring, that means the previous
measuring results are not accompany to the rule of triangle. For example,
the hypotenuse is shorter than a leg. Please remeasure.

Right Trapezoid Measurement
7Calculation
Short press nine times to .
press to get length of L1;
press to get length of L2;
α is the angle between the diagonal L2and the line L4.
The device calculates the area of the Trapezoid S , the length of L3, length of
L4 , and angle β ;
Press to check more results.
1. Press to measure a distance;
2. Use button to do addition calculation.
3. Continuous addition is available under this mode.
Distance Addition
1. Press to measure a distance;
2. Use button to do subtraction calculation.
3. Continuous subtraction is available under this mode.
Distance Subtraction
Remark: User can short press to cancel the last addition or subtraction
movement. Short press twice to quit.

1. Get an area result;
2. Press , and "+" shows on display. Get the second area result;
3. Short press to get the sum of areas.
4. Repeat the operation of step 2 before step 3 to add more areas.
Follow the same steps for subtraction. Follow the same steps for subtraction.
1. Get an volume result;
2. Press , and "+" shows on display. Get the second volume result;
3. Short press to get the sum of volumes.
4. Repeat the operation of step 2 before step 3 to add more volumes.
Area Addition & Subtraction
PIC 4 first area
measurement
PIC 5 second area
measurement
PIC 6 sum of areas
Volume Addition & Subtraction
PIC 7 first volume
measurement
PIC 8 second volume
measurement
PIC 9 sum of volumes

Short press , screen shows:
Press button to exit.
Digital Horizontal Bubble
Remark: The device gets 1X, 2X and 4X three types of zoom. Press and to
adjust the focal length.
1. Press to open the camera;
2. Distance measurement: make the cross exactly point to the target, press to
get the distance.
Long press till the symbol shows. Short press or to adjust the time between
3s to 60s. Short press to start the delay measuring when time of delay is confirmed. If
it is laser on, long press , and start delay measuring at once.
Delay Measurement
Vertical Angle
Horizontal Angle
Auxiliary Function
Open the camera to assist the measuring under strong light when you cannot find
the laser spot by your eyes.
Camera Measuring Assistant
Zoom Times Vertical Angle
Horizontal Angle
Focus Cross
Measuring Result
3. Short press or to exit. If there is measuring result, please short press
twice to exit.
4. Area/Volume/Pythagoras measurement: short press to turn on the camera with
laser on. Press to get the distance result and short press to return, the result
will be in the line.
5. Continuous measurement: press to turn on the camera, and then long press
to start continuous measurement. When you find the target in the cross, short
press to stop measuring.

5. More details:
Check the angle value in the top line.
There are two units of angle for option “ º ” and “ % ” .
Range: -90.0º to 90.0º
Angle
Distance from target 2 to the starting point
a
b
meter move back 0.6m to target 2
Distance from target 2 to the starting point
a
b
meter move on 0.6m to target 2
1) real distance = 2.4m
starting point target 1 target 2 target 3
①a=1.000m
②b=2.000m
③User set the value of a and b.
④a and b can be any value among
the range of the meter.
2) real distance = 3.6m
User can use staking-out function to find the position which match the setting distance.
Staking-out
PIC 10
a
b
PIC 11
Sum distance
Staking-out
symbol
a
b
Distance to the
target position
1. Long press till the device shows as PIC 10;
2. Set the distance:
Press and to adjust the value of a. Press to confirm.
Press and to adjust the value of b. Press to confirm.
3. Arrows:
: Please move back;
: Please move on;
: Match the position.
4. Short press button to exit.
Vertical Angle

1. Delete the records
Delete one piece of records: Short press once when review the records. [DEL] shows on
the top of the display, short press again to delete, or short press to cancel deleting.
Remark: Please note when you clear up the records in the device, you also clear up the
records in U-disk too. The deleted records cannot be recovered. Please consider
carefully before your operation.
2. Clear up all records
Long press till hearing Bi-bi, then all records has been cleared up.
Measuring records are kept in U-disk inner the meter as TXT.
User can check and revise with the accompanied software on PC.
Digital Horizontal Bubble
Record
L: Length
S: Area
V: Volume
C: Perimeter
S1: Area of base
S2: Area of flank
L1: Length of the base of Right Trapezoid
L2: Length of the height of Right Trapezoid
A: Angle
User can recall all the records and export to excel with the software. The meter is
supplied with PC Software: DistView.exe, which is in the folder PCsoft in the U-disk
of the meter. Please DO NOT delete, remove or revise this file. All the operations of
the records will be done in the software.
Download Printing

Click to Tape function, as PIC 14:
Press to start/continue taping.
Press to pause, press to stop, and press to
exit taping.
Taping record will be saved as WAV to folder ,
and named by date. User also can recall the taping r
ecord in Music.
Taping
1. Press to start the camera;
2. Press to start the laser and then press again to make measurement.
3. Short press to take a photo. User can recall photos in MENU/Picture, and
check photos in folder DCMI by connecting PC. Photo will be saved as JPG
and named by date.
Camera
1. Press to start the camera;
2. Long press to full screen mode and start taking video;
3. Press or to exit full screen and stop videoing.
User can recall videos in MENU/Video., and watch them in folder Video by connecting
PC. Video will be saved as H264 and named by date.
Video
Menu
Media Function
Click to Music function, as PIC 12:
Press and to choose song or taping record.
Press to play / pause.
Press to stop / exit.
Long press to delete the selected song or taping record.
The volume can be turn up/down by press and .
Music
Click to Video function, as PIC 13:
Press and to choose the video.
Press to play / pause.
Press to stop / exit.
Long press to delete the selected video.
Video
Short press to the main menu. User can check items Music,
Video, Tape, Picture, System Settings, Time, Bluetooth, Light and
About Us in the main menu.
Move the selecting box by pressing , , , and ;
Short press to get into the item.
Short press to exit main menu.
PIC 12
PIC 13
PIC 14

User can make settings on the below 7 items:
Click to picture records function, as PIC 15
Press and to check the pictures;
Press to exit;
Long press to delete the selected picture.
Picture
Click to System Settings, as PIC 16:
Press and to move the selecting box to
choose the item you want set;
Press and the box turn to green, then press
and to revise the setting value;
Press again to exit revising.
Press to save all the settings and exit system
settings. If user don't save the settings, the
alterations will be only available for recent use.
And all revised settings will be turn to default
values when you start the meter next time.
System Settings
ATTN: Calibration function may affect precision of the device, so this item cannot be
adjusted under default state. User need to follow the below steps for the calibration:
Step 1 Turn off the device;
Step 2 Press and hold the button and then press to start the meter. Release
when the welcome interface shows. Then release the till the meter
shows the main interface;
Step 3 Short press , choose system settings. Now it is free for the calibration.
PIC 15
PIC 16
Item Description
Backlight
Laser Lasting
Auto Power-off
Tone
Distance Unit
Angle Unit
Calibration
Adjusting Range

Click to time setting, as PIC 17:
Press and to choose the item;
Press and to revise the value;
Press to save settings, press to exit.
Time
Click to Bluetooth setting, as PIC 18:
Press and to choose ON/OFF;
Press to save settings, press to exit.
Bluetooth
Click to About Us, as PIC 20:
User can know Model no., Version and Memory
Information here.
About Us
The meter is supplied with Bluetooth 4.0. We get standard version and professional version
on APP. Please login in our website: www.sndway.com to get the newes version of the APP.
Standard version: LDM Studio (FREE)
User can also download the APP by searching "LDM Studio" in your APP store.
Click to light setting, as PIC 19:
Press and to increase/decrease the light;
Press to exit.
Light
PIC 17
PIC 18
PIC 19
PIC 20
Model: H-DS200
Version: V1.0.0.0
SD Capacity: 16.000 GB
Disk Space Left: 7.359 GB
APP

Professional CAD Sketch (just for options)
Professional CAD drawing version
Connect to Computer
Connect the Meter to with USB cable.
Notes: 1. Please try to use original USB cable;
2. Please try to use the USB inserts at back of host.
3. Please remove the batteries and try again when it is fail to connect with the PC.
Open the U-disk and there are folders as below:
1. Data: All records are saved in this folder. Please DO NOT delete or revise the files in this folder.
Open the folder, and read data.txt. User can read, export and print the records by Distview.
2. DCMI: All pictures are saved in this folder.
Connect to PC
Docs in U-disk

4. PCsoft: Software for PC. Please DO NOT remove, delete or revise any information in this folder.
DistView.exe is a software for PC to check, export and print the records. It must be kept with
Disview.mdb and Distview.rav in the same folder, or the software cannot run normally.
5. VIDEO: All videos are saved in this folder
Videos are saved as H264 here. info is a special file, please don't delete or revise the contents in it.
3. MUSIC: All audios files are saved in this folder
User can add favorite songs into this folder. It just supports MP3 and WAV files.
Technical Information
± (2mm+Dx10-5) *
class II, < 1 mW
635 nm
1mm
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
±90°
Item 160m 200m
Working range
Smallest unit displayed
Accuracy
Laser
Laser wavelength
Continuous measurement (tracking)
MAX & MIN Value
Area / volume
Pythagoras
Skating-out
Delay measurement
Tail-board
Self-Calibration
Angle of tilt
Length/Area/Volume Addition/Subtraction

Yes
Yes
Yes
Yes
Yes
20~120 s
100 ~300s
-20 ... +60 °С
0 … +40 °С
20%-80% RH
Ni-mh 2400mAh 1.2V AAx2
144х59х30mm
Notes: Use a reflector to increase the measurement range under strong light or if the target has
poor reflection properties. Low power supply can also cause wrong measuring results.
* "d" means the real distance.
16GB
Electronic Level Bubble
Camera
Photo/Video/Tape
4 times zoom
U-Disk
USB derive
Auto laser off
Auto power off
Storage temperature range
Storage temperature range
Storage Humidity
Power supply
Dimensions
Errors
Please check accordingly when you meet the situation as below.
ERR 1
ERR 2
ERR 3
ERR 4
ERR 5
ERR 6
ERR 8
ERR 7
Info message Cause
Received signal is too weak. Chose the surface with stronger
reflectance. Use the reflector.
Received signal is too strong. Chose the surface with weaker
reflectance. Use the reflector.
Low power. Change or recharge the batteries.
Fail of memorizer. Please contact the manufacturer.
Pythagoras measuring error. Please re-measure.
Exceed the measuring range. Use the device within the range.
Can not find the camera Please contact the manufacturer.
Can not measure angle Please contact the manufacturer.
Solution

Routine Maintenance
1) The meter should not be stored in high temperature and strong humidity environment for
long time;
2) If it is not used very often, please take out the battery and place the meter in the allocated
potable bag and store in cool and dry condition.
3) Please keep the device surface clean. Wet soft cloth is applied to clean dust, but erosion
liquid is never allowed to use for the meter maintenance.
4) Laser output window and its focus lens can be maintained according to maintenance
procedures for optical device.