VEVOR LPK877-1 User manual

Technical Support and E-Warranty Certificate www.vevor.com/support
ADJUSTABLE BABY HIGH CHAIR
USER MANUAL
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the
major top brands and does not necessarily mean to cover all categories of tools offered by
us. You are kindly reminded to verify carefully when you are placing an order with us if you
are actually saving half in comparison with the top major brands.

- 1 -
Model: LPK877-1
Have product questions? Need technical support? Please feel free to
contact us:
Technical Support and E-Warranty Certificate
www.vevor.com/support
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
ADJUSTABLE BABY HIGH CHAIR

- 2 -
PRODUCT PARAMETERS
Model
Product Size(WxDxH）
Loading
Capacity
material
Color
LPK877
-1
W15.4" xD18"xH30.9"
(390x458x785 mm)
250 lbs (Max)
(about 113KG)
Beechwood
primary
color
ASSEMBLYPRECAUTIONS
1. Assemble needs to follow these instructions. Incorrect assembly can be
a hazard.
2. Wear safety goggles and heavy-duty work gloves during assembly.
3. Do not assemble when tired or when under the influence of alcohol,
drugs or medication.
4. Weight and other product properties are only applicable to correctly and
completely assembled products.
5. Keep the assembly area clean and well-lit.
6. Keep bystanders out of the area during assembly.
USE PRECAUTIONS
WARNING: TO PREVENT SERIOUS INJURY AND DEATH FROM TIPPING:
1. This product is not a toy.Please keep theproduct away from children while
assembling.
2. Use as intended only. Do not let children play or jump on the product.Do not
stand on the item or use as a step ladder.
3. Inspect before every use. Do not use it if parts are loose or damaged.
4. Tighten the lower screws every three months to prevent loosening of the legs.
5. Do not exceed the listed weight capacity.
Prevent serious injury or death from falls or sliding out:Always keep child in
view while in high chair.-Always secure child in the restraint.
It is recommended that the high chair be used only bychildren capable of
sitting upright unassisted.

- 3 -
This product is suitable for children age: 6 months and older.
SAVE THESE INSTRUCTIONS
PARTS LIST
No.
A
B
C
D
E
Name
Side shelf
Back panel
Sitting
board
Bar
safety
belt
Parts
Quantiy
2 PCS
1 PCS
1PCS
3 PCS
1 PCS
No.
F
G
Name
Cushioned
M6 screw
Hex wrench
Parts
Quantiy
1 PCS
20 PCS
1 PCS

- 4 -
ASSEMBLY STEPS
STEP1
Install the corresponding parts according to the connecting lines in the
drawing. When installing, pay attention to the screws on one side not to
tighten, reserve a gap to facilitate the next step of installation

- 5 -
STEP2
After installing all the parts according to the illustration, tighten the
screws

- 6 -
COMPLETION
Place the Cushion on the chair as shown, and tie the Cushion strapping
rope to the side frame. And fasten your seat belt. Finish
(Note: Please refer to the video on the page for the installation of seat
belts)
Cleaning and Maintenance
-Use a soft, clean cloth that will not scratch the surface when dusting. 󳮂
- Periodically tighten screws and bolts,as needed.󳮂
- Do not store wood products outdoors or in a humid environment when not in use
Sanven Technology Ltd.
Address: Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730
Made in China

Support and E-Warranty Certificate
www.vevor.com/support