VEVOR DLT215F User manual

Technical Support and E-Warranty Certificate www.vevor.com/support
TELESCOPIC LADDER
MODEL:DLT215F/DLT218F
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and doses not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.

- 1 -
MODEL:DLT215F/DLT218F
Have product questions? Need technical support? Please feel free to
contact us:
[e-mail]
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
TELESCOPIC LADDER

- 2 -
CAUTION: Please read ALL instructions before using!!
Before Using
1. Ensure that you are fit enough to use the ladder. Certain medical
conditions, medication, alcohol, or drug abuse could make ladder use
unsafe. The weight capacity is 420 lbs.
2. When transporting ladders on the roof bars of a vehicle, ensure that it is
suitably placed to prevent damage.
3. Inspect the ladder after delivery and before first use to confirm the
condition and operation of all parts.
4. Visually check the ladder is not damaged and is safe to use whenever
using.
5. For professional users, regular periodic inspection is required.
6. Ensure the ladder is suitable for the task.
7. DO NOT USE A DAMAGED LADDER!
8. Remove any contamination from the ladder. Such as wet paint, mud, oil,
or snow.
9. Before using the ladder at work, a rick assessment should be carried out
respecting the legislation in the country of use.
Positioning and Erecting the Ladder
1. Incline angle should not exceed 75 degrees.
2. Ladder shall be on an even, level, and unmovable base.
3. Leaning ladder should be leaned against a flat non-fragile surface and
secured before use, e.g., tied or use a suitable stability device.
4. When positioning the ladder, consider the risk of a collision with the

- 3 -
ladder, i.e., from pedestrians, vehicles, or doors(no fire exists) and
windows in the work area.
5. Identify any electrical risk areas where the ladder is used, such as
overhead lines or exposed electrical equipment.
6. Ladder shall be on its feet, not the rungs or steps.
7. Ladders shall not be positioned on slippery surfaces (such as ice, shiny
waxed surfaces, or significantly contaminated solid surfaces)unless
additional effective safety measures are taken to prevent the ladder from
slipping or ensure contaminated surfaces are sufficiently cleaned.
Using the Ladder
1.DO NOT EXCEED THE MAXIMUM TOTAL LOAD (420 lbs).
2. DO NOT overreach. Users should keep their buckle(navel) inside the
stiles and both feet on the same step/rung while working.
3.DO NOT step off a leaning ladder at a higher level without additional
security, or use of a suitable stability device.
4.DO NOT use standing ladders of access to another level.
5.DO NOT stand on the top three steps/rungs of a leaning ladder
6. Ladders should ONLY be used for light work of short duration.
7. DO NOT use the ladders outside in adverse weather conditions, such as
strong winds.
8. TAKE PRECAUTIONS AGAINST CHILDREN PLAYING AROUND THE
LADDER.
9. Face the ladder when ascending and descending.
10. Keep a secure grip on the ladder when ascending and descending.
11. DO NOT use the ladder as a bridge.
12. Wear suitable footwear when using the ladder.
13. Avoid excessive side loading(i.e.drilling brick and concrete).

- 4 -
14. DO NOT spend long on a ladder without regular breaks(fatigue is a
safety risk).
15. Leaning ladders used for access to a higher level should be extended
at least 1m above the landing point.
16. Equipment carried while using a ladder should be light and easy to
handle.
Open the Ladder
Note:The actual number of ladder steps shall prevail in kind.
Automatic locking: Each step/rung of your ladder has 2 locking pins that
blocked. They are automatically inserted into the slots of the uprights in
place when the ladder is extended.
The condition of the lock is of the two black buttons on the side of each
rung is displayed:
Unlocked position(see Picture#1 below): There is a gap between the
buttons and the Spar.
Locked position(see Picture#2 below): The buttons are located directly
on to the leg.
1#
2#

- 5 -
Complete Extension of the Ladder:
Note:The actual number of ladder steps shall prevail in kind.
Place the ladder on firm, level ground, and put one foot on the lowest
step/rung.
The top-rung off, and check if the buttons are locked (see Picture #2
above). Then, repeat the process with the next lower rungs until the arms
are entirely extended (see Pictures #3 and #4).
Partial Extension of the Ladder:
Place the ladder on firm and flat ground, move one foot on the lowest
rung
the lowest rung off and check if the buttons are locked(see Picture#2
above) .Repeat the process with each of the next higher rung, until the
arms are completely extended.
Caution: Always check that all buttons on the exact position are "locked" ,
before you climb on the ladder.
3# 4#
Partial Extension of the Ladder:

- 6 -
Put the ladder on a firm, level ground, and move one foot on the
lowest rung.
The lowest rung off and check if the buttons are locked(see
Picture#2 above). Repeat the process with the next higher rungs
until the arms are entirely extended.
Caution: Always check that all buttons are in the " locked " position
before climbing the ladder.
Shorten the Ladder:
Put the ladder on a firm and level ground, shorten the ladder from the
lowest rung.
The two keys to unlock (see Picture #5).
#5
Troubleshooting Instructions
If there is a problem with your telescopic ladder during operation, please
check the troubleshooting table below before calling the service
department.

- 7 -
Troubleshooting Instructions
Fault Phenomenon
Cause of Issue
Solution
Open the rear ladder
to lean left and right.
The section of the
ladder does not
expand properly.
Take back the ladder
and check whether
each section is stuck,
such as normal
shrinkage. Re-open it
and make sure that
each section is in
place (There are lock
marks on both sides
of the pedal.)
Product Technical Parameters
Product Name
TELESCOPIC LADDER
Model
DLT215F
DLT218F
Extended Height
15ft
18.5ft
Number of Floors
12Layers
14Layers
Maximum Load
Capacity Each Layer
420lbs(190kg)
420lbs(190kg)
Overall Dimensions
(L*W*H)
965*480*95mm
1135*480*100mm
Cleaning Instructions
Store the ladder in the closed position.
Properly secure and support the ladder while in transit.
Keep the ladder clean and free from all other harmful materials.

- 8 -
Disposal
Disposal of all packaging, paper, cartons, and plastic, plastic bags
according to your local recycling regulations. At the end of the product’s
lifespan, please dispose of it at an authorized household waste recycling
center.

Technical Support and E-Warranty Certificate
www.vevor.com/support