Have product questions? Need technical suppo?
Please feel free to contact us:
NEED HELP? CONTACTUS!
SOLAR LIGHTS
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR resees clear interpretation of
our user manual. The appearance of the product shall be subject to
the product you received. Please forgive us that we won't inform
you again if there is any technology or software updates on our
product.
01 02 03 04
Model JY5152
Solar Panel 5V 80mA
Batte 3.7V 500mAh
LED Quantity 1 LED
Rated Power 0.3W
Dimensions 120x120x410 mm
NetWeight 147g
IP Rating IP44
This is a solar energy product, please choose a location that
receives adequate sunshine to ensure eective charging during
the day. The longer it gets sunshine the longer it can illuminate.
SPECIFICATIONS
TWO LIGHTING MODES
PRODUCT FEATURES
Easy to install and uses energy saving solar technology.Widely
used for illumination in garden, sand, other places exposed to
sunlight. Fully automated operation. Automatically turns o during
the day and automatically lights up at the dusk.
REMARKS
1.OFF
2.Lighting Mode:
Automatically turns o during the day and automatically lights up
at the dusk.
1. Take the main body of the product and rotate counterclockwise
to take out the transparent lampshade.
2. Switch the light body from OFF to ON, cover the solar panel on
the top of the light body with the palm, and the LED light will light
up. When the palm is released, the led light will turn o.
3. Tighten the transparent lampshade clockwise to the lamp body.
4. Take the stainless steel pipe and pull out the black plastic
connector from the stainless steel pipe.
5. Inse the plastic pa of the black pointed plug into the
stainless steel tube.
6. Inse the stainless steel tube into the transparent lampshade.
7. Inse the black pointed pa of the overall lamp into the land
about 15cm.
1.Built-in solar photovoltaic cells, photovoltaic cells generate
electricity during the day, LED lights will not be lit, and at night by
internal lithium batteries to power on, light up LED lights.
2.The product has a built-in lithium batte, and it is strictly
forbidden to replace the batte by yourself. Please do not go near
high temperature environment, do not mix with household garbage,
and should take it to the local batte treatment center.
3. In case of full sunlight, it takes 8 hours to ll the point. Weather
conditions, placement locations can aect the actual usage time.
INSTALLATION
NOTE
Impoer: WAITCHX
Address: 250 bis boulevard Saint-Germain 75007 Paris
Impoer: FREE MOOD LTD
Address: 2 Holywell Lane, London, England, EC2A 3ET
EUREP UK LTD
UNIT 2264, 100 OCK STREET, ABINGDON
OXFORDSHIRE ENGLAND OX14 5DH
UK REP
EUREP GmbH
Unterlettenweg 1a, 85051 Ingolstadt,
Germany
EC REP
Manufacturer: Ningbo Liangying Electronic Technology Co., Ltd
Address: Meiqiao Industrial Area, Qiaotouhu Town, Ninghai
County, Ningbo, 315611 Zhejiang P.R. China.
This product is subject to the provision of european Directive
2012/19/EC. The symbol showing a wheelie bin crossed through
indicates that the product requires separate refuse collection in the
European Union. This applies to the product and all accessories
marked with this symbol. Products marked as such may not be
discarded with normal domestic waste, but must be taken to
acollection point for recycling electrical and electronic devices.
This device complies with Pa 15 of the FCC Rules.Operation is
subject to the following two conditions:(1)This device may not
cause harmful inteerence, and (2)this device must accept any
inteerence received,including inteerence that may cause
undesired operation.
