VEVOR GT1504B User manual

Technical Support and E-Warranty Certificate www.vevor.com/support
SPREADER USER MANUAL
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and does not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.

1
Model: GT1504B
Have product questions? Need technical support? Please feel free to
contact us:
Technical Support and E-Warranty Certificate
www.vevor.com/support
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
SPREADER

2
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
IMPORTANT NOTE:
Do not overload the hopper. Lightweight filters and potting mixers
are recommended.
SPECIFICATIONS
Model
GT1504B
Product Size
770×530×820mm
Color
Black

3
COMPONENTS
A×1
Hopper & control cable
B×1
Hopper screen
C×1
Impeller
C1×1
Gear & axle
assembly
D×2
Wheel
E×1
Control switch
F×1
Holder
G×2
Wheel assembly
frame
H×1
Support leg
I×1
Handle
J×1
Fixing rod
K×1
R pin
L×5 L×2
Bolt
M×1
Bolt
N×4
Bolt
O×1
Bolt
P×2
Out
bushing
M6×35
M6×35
M5×45
M6×50
M4×20
Q×2
Inner
bushing
R×4
Washer
S×2
Flat washer
T×2
Alex end
cap
U×2
Pin
V×1
Rain Cover

4
Installation instructions:
①Install the wheels and gear and axle and impeller assembly
②Install the support leg

5
③Install the hopper and handle
④Install the control switch and hopper and rain cover

6
USING YOUR SPREADER
HOW TO USE THE SPREADER TROLLEY
TO OPEN- Push the Control Level forward until it stops against button.
TO CLOSE- Pull the control Lever fully back toward Operator.
Follow the instructions provided by the manufacturer of the spreading material.
NOTE: Make sure that the spreading material is evenly distributed. The spreading
material must be dry.
1. Before feeding in the spreading material, set the dispensing lever to the 0FF position
(dispensing flap closed).
2. Fill the spreader trolley hopper.
3. To adjust the volume of spread, set the dispensing lever to the desired position.
4. In order to spread or scatter the material, drive the spreader trolley at an even speed (the
higher the speed, the greater the scattering distance).
5. Close the dispensing flap as soon as you stop the spreader trolley (dispensing lever in
0FF position).
Address: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai
Imported to AUS: SIHAO PTY LTD.1 ROKEVA STREETEASTWOOD NSW 2122 Australia
Imported to USA: Sanven Technology Ltd.Suite 250, 9166 Anaheim Place, Rancho
Cucamonga, CA 91730
Made In China

Technical Support and E-Warranty Certificate
www.vevor.com/support

Technique Assistance et certificat de garantie électronique
www.vevor.com/support
ÉPANDEUR MANUEL DE L'UTILISATEUR
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and does not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.

1
Modèle : GT1504B
Have product questions? Need technical support? Please feel free to
contact us:
Technical Support and E-Warranty Certificate
www.vevor.com/support
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
SPREADER