VEVOR GT1606A User manual

Technical Support and E-Warranty Certificate www.vevor.com/support
SPREADER USER MANUAL
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and does not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.

1
Model: GT1606A
Have product questions? Need technical support? Please feel free to
contact us:
Technical Support and E-Warranty Certificate
www.vevor.com/support
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
SPREADER

2
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
IMPORTANT NOTE:
Do not overload the patio planters. Lightweight filters and potting
mixers are recommended.
SPECIFICATIONS
Model
GT1606A
Product Size
885×485×750mm
Color
Black
COMPONENTS

3
Installation instructions:
①Pull the handle up
②Turn the handle up
③Tighten the screw to secure the handlebar handle

4
USING YOUR SPREADER
HOW TO USE THE SPREADER TROLLEY
TO OPEN- Push the Control Level forward until it stops against button.
TO CLOSE- Pull the control Lever fully back toward Operator.
Follow the instructions provided by the manufacturer of the spreading material. NOTE:

5
Make sure that the spreading material is evenly distributed. The spreading material must
be dry.
1. Before feeding in the spreading material, set the dispensing lever to the 0FF position
(dispensing flap closed).
2. Fill the spreader trolley hopper.
3. To adjust the volume of spread, set the dispensing lever to the desired position.
4. In order to spread or scatter the material, drive the spreader trolley at an even speed (the
higher the speed, the greater the scattering distance).
5. Close the dispensing flap as soon as you stop the spreader trolley (dispensing lever in
0FF position).
Address: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai
Imported to AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122 Australia
Imported to USA: Sanven Technology Ltd.Suite 250, 9166 Anaheim Place, Rancho
Cucamonga, CA 91730
Made In China
REP
EC
SHUNSHUN GmbH
Römeräcker 9 Z2021,76351
Linkenheim-Hochstetten,Germany
REP
UK
Pooledas Group Ltd
Unit 5 Albert Edward House, The Pavilions
Preston, United Kingdom


Technique Assistance et certificat de garantie électronique
www.vevor.com/support
ÉPANDEUR MANUEL DE L'UTILISATEUR
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and does not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.

1
Modèle : GT1606A
Have product questions? Need technical support? Please feel free to
contact us:
Technical Support and E-Warranty Certificate
www.vevor.com/support
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
SPREADER

2
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
NOTE IMPORTANTE:
Ne surchargez pas les jardinières de terrasse. Des filtres légers et
des mélangeurs d’empotage sont recommandés.
CARACTÉRISTIQUES
Modèle
GT1606A
Taille du produit
885×485×750mm
Couleur
Noir
COMPOSANTS

3
Instructions d'installation:
①Tirez la poignée vers le haut
②Tournez la poignée vers le haut
③Serrez la vis pour fixer la poignée du guidon

4
UTILISER VOTRE ÉPANDEUR
COMMENT UTILISER LE CHARIOT ÉPANDEUR
POUR OUVRIR - Poussez le niveau de contrôle vers l'avant jusqu'à ce qu'il s'arrête contre
le bouton.
POUR FERMER - Tirez complètement le levier de commande vers l'arrière vers l'opérateur.

5
Suivez les instructions fournies par le fabricant du matériau d'épandage. REMARQUE :
Assurez-vous que le matériau à épandre est réparti uniformément. Le matériau à épandre
doit être sec.
6. Avant d'introduire le produit à épandre, placez le levier de distribution sur la position 0FF
(volet de distribution fermé).
7. Remplissez la trémie du chariot épandeur .
8. Pour régler le volume de pâte à tartiner, placez le levier de distribution sur la position
souhaitée .
9. Pour épandre ou disperser le matériau, conduire le chariot épandeur à une vitesse
constante (plus la vitesse est élevée, plus la distance de dispersion est grande).
10. Fermez la trappe de distribution dès l'arrêt du chariot épandeur (levier de distribution en
position 0FF).
Adresse : Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai
Importé en Australie : SIHAO PTY LTD, 1 ROKEVA STREETASTWOOD NSW 2122
Australie
Importé aux États-Unis : Sanven Technology Ltd.Suite 250, 9166 Anaheim Place, Rancho
Cucamonga, CA 91730
Fabriqué en Chine
REP
EC
SHUNSHUN GmbH
Römeräcker 9 Z2021,76351
Linkenheim-Hochstetten,Germany
REP
UK
Pooledas Group Ltd
Unit 5 Albert Edward House, The Pavilions
Preston, United Kingdom


Technisch Support- und E-Garantie-Zertifikat www.vevor.com/support
STREUER BENUTZERHANDBUCH
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and does not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.

1
Modell: GT1606A
Have product questions? Need technical support? Please feel free to
contact us:
Technical Support and E-Warranty Certificate
www.vevor.com/support
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
SPREADER

2
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
WICHTIGER HINWEIS:
Überladen Sie die Pflanzgefäße für die Terrasse nicht. Empfohlen
werden leichte Filter und Blumenerde.
SPEZIFIKATIONEN
Modell
GT1606A
Produktgröße
885×485×750mm
Farbe
Schwarz
KOMPONENTEN

3
Installationsanleitung:
①Ziehen Sie den Griff nach oben
②Drehen Sie den Griff nach oben
③ Ziehen Sie die Schraube fest, um den Lenkergriff zu
befestigen
Table of contents
Languages:
Other VEVOR Spreader manuals