VEVOR TM24 User manual

Technical Support and E-Warranty Certificate www.vevor.com/support
LEAF TRIMMER
MODEL:TM24
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and doses not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.

- 1 -
MODEL:TM24
Have product questions? Need technical support? Please feel free to
contact us:
[e-mail]
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
LEAF TRIMMER

- 2 -
Warning-To reduce the risk of injury, the user must read the
instructions manual carefully.
IMPORTANT SAFETY INSTRUCTIONS
WARNING：
Read all safety warnings, instructions, illustrations and specifications
provided with this product. Failure to follow all instructions listed below may
result in product damage or serious injury.
Basic Safety Information:
1. This product is for trimming leaves only.
2. The blade is very sharp. Beware of injury when using the trimmer to
work or replace the blade.
3. Put on the sheath for the blade if you are ready not to use the trimmer
for a long time.
4. Make sure the lid is on before use.
5. Be gentle with the trimmer when using it. Violent use can result in
accidental injury and damage to the trimmer.
6. Never place your fingers, gloves or any other body part in contact with
the grill or the blade.
7. Do not use scissors, knives or any instrument above the grill.
8. This product is not a toy. Do not allow children to play with or near this
item.
Please Note:
The manufacturer does not accept any responsibility for damages caused
to or by the trimmers resulting from inadequate use or assembly. Please
use the trimmers in accordance with existing laws and regulations.

- 3 -
SAVE THESE INSTRUCTIONS
Basic parameters
Package size（mm）
670×670×315
Size（inch）
24
N.W（kg）
8.9
G.W（kg）
11.13
Operating mode
manual
Blade
420 Stainless steel/straight edge
Container
201 Stainless steel
Transmission ratio
1:24
Service life
1-year warranty
OPERATION
1. Remove the top from the flower trimmer's base.
Remove the top from the flower
trimmer's base. The inside of the top
contains the high-density rubber tong
used to push the plant leaves into the
blade grill. The cutting blades or
wires are located below the grill.

- 4 -
2. Place the untrimmed plants on the grill.
3. Place the top and handle back on the base.
4. Turn the handle clockwise for about 15-30 rounds.
Using the handle, make 15-30 complete
turns. While spinning the handle, the inside
rubber twist tongues multiply the rate of the
spinning plants and blades by over 30
times. A combination of the rubber tongues
presses and rolls the plants into the
spinning blades can improve the cutting
efficiency. Only 30 seconds can yield one
hour's work.
Place the untrimmed plants on top
of the grill. The plans should be
enough to make sure the grill
surface is covered(approximately
40 dry grams)

- 5 -
5. Remove the top and collect the plants.
Open the top and the trimmed plants and
their frag mental bud/leaves can be found
individually on the middle grill and in the
trimmer basin. Depending on the type of
plants, the trimming can be used for the
preparation of plants' essential oils.
6. Repeat the process for more harvest.
If you think the leave pieces are not small
enough, keep repeating the above process
as many times as you want, or until you
have completed your harvest. When
finished, easily clean every part of the
trimmer and store it.
Sanven Technology Ltd.
Address: Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

Technical Support and E-Warranty Certificate
www.vevor.com/support