Viconics VT7300F5500-2969 User manual

The Addi(on Residen(al Suite Thermostats User Manual
Viconics Thermostat VT7300F5500-2969
At THE ADDITION, the suite ven(la(on system can operate either in a HEATING or COOLING mode, not both
at the same (me. The mode is determined by the opera(on of the Building Central System.
COOLING MODE: Thermostat is automa(cally switched to cooling mode when the Building Central System is
providing CHILLED water to the suite manifolds.
On a call for COOLING
•!"#$%&&'()*$+,)&-./0#1$234$-(''$5&6#$78
•!"#$9"#:6&,9/9$-(''$,(*)/'$9"#$6/)(;&'<$=>?/5$@&)#$?/'?#$9&$&A#)B
•CD#:$/$E$6()F9#$<#'/G$+H6#$<#'/G$9&$/''&-$%"(''#<$I/9#:$9&$:#/5"$9"#$J)(91K
•!"#$L/)$234$-(''$5&6#$78
•!"#$!"#:6&,9/9$-(''$9"#)$6&<F'/9#$;/)$/55&:<()*$9&$<#6/)<M$;:&6$N2&-$OA##<$N$9&$NP(*"$OA##<N$
I"#)$9"#$QF('<()*$%#)9:/'$OG,9#6$(,$A:&?(<()*$%"(''#<$-/9#:$/)<$9"#$,F(9#$"/,$/$5/''$;&:$P#/H)*M$9"#$@&)#$?/'?#$
:#6/(),$5'&,#<$/)<$9"#$!"#:6&,9/9$does not$9F:)$9"#$;/)$&)B$C''$234R,$,9/G$&SB$
I"#)$9"#:#$(,$8&$5/''$;&:$"#/H)*$&:$5&&'()*M$/''$234R,$,9/G$&SM$@&)#$?/'?#$(,$5'&,#<$/)<$;/)$(,$&SB
!"#$9"#:6&,9/9$:#/<&F9$-(''$,5:&''$T#9-##)$:&&6$9#6A#:/9F:#$/)<$NOG,9U&<#$%&&'NB$$
HEATING MODE: Thermostat is automa(cally switched to hea(ng mode when the Building Central System is
providing HEATING water to the suite manifolds.
On a call for HEATING
•!"#$P#/H)*$+./6#1$234$-(''$5&6#$78
•!"#$9"#:6&,9/9$-(''$,(*)/'$9"#$6/)(;&'<$=>?/5$@&)#$?/'?#$9&$&A#)B
•CD#:$/$E$6()F9#$<#'/G$+H6#$<#'/G$9&$/''&-$P&9$I/9#:$9&$:#/5"$9"#$J)(91K
•!"#$L/)$234$-(''$5&6#$78
•!"#$!"#:6&,9/9$-(''$9"#)$6&<F'/9#$;/)$/55&:<()*$9&$<#6/)<M$;:&6$N2&-$OA##<N$9&$NP(*"$OA##<N$
I"#)$9"#$QF('<()*$%#)9:/'$OG,9#6$(,$A:&?(<()*$P&9$-/9#:M$/)<$9"#$,F(9#$"/,$/$5/''$;&:$%&&'()*M$9"#$@&)#$?/'?#$
:#6/(),$5'&,#<$/)<$9"#$!"#:6&,9/9$does not$9F:)$9"#$;/)$&)B$C''$234R,$,9/G$&SB$
I"#)$9"#:#$(,$8&$5/''$;&:$"#/H)*$&:$5&&'()*M$/''$234R,$,9/G$&SM$@&)#$?/'?#$(,$5'&,#<$/)<$;/)$(,$&SB

!"#$9"#:6&,9/9$:#/<&F9$,5:&'',$T#9-##)$N:&&6$9#6A#:/9F:#N$/)<$NOG,9U&<#$"#/9NB$
Adjus(ng OCCUPIED Temperature Set-points:
!&$/<VF,9$9"#$&55FA(#<$9#6A#:/9F:#M$A:#,,$9"#$JW$/)<$47I8$/::&-,$TFX&),$&)$9"#$9"#:6&,9/9$9&$*#9$9&$9"#$
<#,(:#<$9#6A#:/9F:#$;&:$G&F:$5&6;&:9B$W'#/,#$)&9#$9"/9$#?#)$9"&F*"$9"#$TFX&),$-(''$/''&-$G&F$9&$,#9$9"#$
9"#:6&,9/9$,#9YA&()9,$9&$9"#$:/)*#,$(<#)HZ#<$T#'&-$;&:$T&9"$"#/H)*$/)<$5&&'()*M$9"#$,G,9#6$&A#:/H)*$:/)*#$
-(''$:#,9:(59$9"#$/59F/'$9#6A#:/9F:#,$9&$9"#$/59F/'$:/)*#$&;$9"#$QF('<()*$%#)9:/'$OG,9#6B$
!"#$!"#:6&,9/9$A:&?(<#,$/$,()*'#$&55FA(#<$,#9YA&()9$/<VF,96#)9$$
I"#)$()$P#/H)*$U&<#$9"#$,#9YA&()9$:/)*#$(,K$>B[$9&$=>B\$]%B$$
I"#)$()$%&&'()*$U&<#$9"#$,#9YA&()9$:/)*#$(,K$^_B\$9&$E`B[$]%B$
If desired, seWng Hea(ng Set-point to 4.5 or Cooling Set-point to 37.5 will basically disable the thermostat
PIR Func(on:
!"#$TF('9Y()$W/,,(?#$a);:/Yb#<$&55FA/)5G$,#),&:$+Wab1$/F9&6/H5/''G$,#'#59,$9"#$!"#:6&,9/9$Occupied$O#9YW&()9,$
-"#)$/)G$6&H&)$(,$<#9#59#<M$a;$9"#$Wab$,##,$)&$6&H&)$;&:$c>$P&F:,$9"#)$9"#$Standby$O#9YW&()9,$-(''$T#$
/5H?/9#<B$a;$9"#$Wab$,##,$)&$6&H&)$;&:$c=>$P&F:,$9"#)$9"#$Unoccupied$O#9$W&()9,$-(''$T#$/5H?/9#<B$C,$,&&)$/,$
/)G$6&?#6#)9$(,$<#9#59#<$9"#$!"#:6&,9/9$-(''$:#9F:)$9&$Occupied$O#9YW&()9,$9"/9$-#:#$A:#?(&F,'G$,#9B$
Important:$!GA(5/'$6&H&)$<#9#5H&)$:/)*#$(,$/:&F)<$^=Y^>$;##9M$-(9"$A#:A#)<(5F'/:$)&:6/'$-/'0$,A##<B$
Default STANDBY and UNOCCUPIED Set-Points:
!"#$<#;/F'9$,#9YA&()9,$T#'&-$/:#$Zd#<$()$9"#$!"#:6&,9/9$/)<$/:#$)&9$F,#:$/<VF,9/T'#B$!"#G$-#:#$<#,(*)#<$9&$
/''&-$9"#$,G,9#6$9&$T#$/T'#$9&$:#,9&:#$&55FA(#<$,#9YA&()9,$;:&6$,9/)<TG$-(9"()$/$:#'/H?#$,"&:9$A#:(&<$&;$H6#$
/)<$/',&$9&$'(6(9$#)#:*G$F,#$-"#)$9"#$,A/5#$(,$F)&55FA(#<B$
OVERRIDE BuZon:
7?#::(<#$TFX&)$(,$87!$LJ8%!a78C2M$/)<$-(''$<(,A'/G$N2&50&F9N$-"#)$&?#::(<#$TFX&)$A:#,,#<B$a;$9"#$TFX&)$(,$
A:#,,#<$;&:$eY^\$,#5&)<,$(9$-(''$#)9#:$9"#$5&)Z*F:/H&)$6#)FB$!"#$A/,,-&:<$(,$^\\\$6()F,$f3::&:$5&<#gB$ This
menu is intended for experienced technical configura(on and altering any seWngs inside of this menu can
cause the thermostat to operate incorrectly and service calls to correct issues from these being pressed will
not be covered under warranty
HIDDEN BuZons:
On some thermostats the manufacturer has inadvertently le] the plunger for some unused switches in place
but these SHOULD NOT BE PRESSED. They are not iden(fied by a buZon symbol on the front cover of the
thermostat and are not part of the specific configura(on of these thermostats. Pressing these buZons can
Default Set-point for St-By HT
19.5 C
Default Set-point for St-By CL
25.5 C
Default Set-point for Unocc HT
17.5 C
Default Set-point for Unocc CL
27.5 C

cause the Thermostat to operate incorrectly and service calls to correct issues from these being pressed will
not be covered under warranty
DEFAULT SETTINGS FOR THERMOSTATS$
hhh$W/:/6#9#:,$()$*:##)$)##<$9&$T#$,#9$/,$<(:#59#<$;&:$9"#$,#iF#)5#$9&$-&:0$/,$#dA#59#<B$
Parameter
Default value for bedrooms
PswrdSet
0
Com Addr
---
Pan ID
---
Channel
---
GetFrom
0
BI1
None
BI2
None
UI3
COC/NC (contact open = cold water)
MenuScro
On
AutoMode
On
C or F
C
Lockout
1 (will display "Lockout" when override button pushed)
Pipe No
This parameter will be fixed to 2.0
SeqOpera
1
Fan Menu
4 (Auto)
St-By Tm
4 hrs
Unocc Tm
24 hrs
St-By HT
19.5C
St-By CL
25.5 C
Unocc HT
17.5C
Unocc CL
27.5C
heat max
24C
cool min
19C
Pband
3 F
Set Type
Perment
Spt Func
AttchStp
TOccTime
2 (Unused)
deadband
2 F
cal RS
---
aux cont
0

Auto Fan
AS AD
RA/DA
DA
Reheat
0 (Unused)
Low AO2
2 V
Med AO2
4.5 V
High AO2
7 V
UI3 dis
---