Vicoustic Mega Bass Trap VMT User manual

EN
EN
Mega Bass Trap VMT
Installation Manual

EN

EN
MATERIAL NEEDED
Included
FlatPanel VMT x2 Prole x4 Base x2 Cover x2
Cover Bracket x2 Gauge x1
PET Filling x6
Screws x16
Not Included
DrillMeasuring Tape Screwdriver Pencil Wall Plugs and Screws
Finishing Prole x4
Protection Bar x8 Screws x16
Level

EN
12
3 4
Use the gauge provided to
mark the holes for xing it,
according to the diagrams.
ABC
D
E
D
E

EN
5 6
7 8 Repeat the same steps to
make the markings on the
another wall.
D
E
FGH
I
If necessary, open the holes in
the marked places, and apply
the wall plugs. Fix the prole
indicated, with screws suitable
for the wall where you are
making the installation.
GH
I

EN
9 10
11
After installing the second
prole, x the protection
bars with the metallic screws
provided.
If necessary, open the holes in
the marked places, and apply
the wall plugs. Fix the Bass
Trap base beneath the proles,
with screws suitable for the
wall where you are making the
installation.
Fix the cover bracket, with screws suitable for the wall where you are making the
installation.

EN
12 Pet Filling

EN
13 14
15 16

EN
18
19 20
Fix the nishing proles with
the paintend screws supplied.
Install the Bass Trap cover.
17 Install the VMT Panel.

EN

EN

© Vicoustic, 2022 | V2
No parts of this document might be copied and/or published without written consent of Vicoustic.
Main Oce, R&D & Logistics
Avenida do Pólo 3, Nº 159, Carvalhosa
4590-137 Paços de Ferreira, Portugal
Oce
Rua Quinta do Bom Retiro Nº 16, Armazém 9
2820-690 Charneca da Caparica, Portugal
T ([phone]
Info and Sales
[e-mail]
www.vicoustic.com