Vicoustic VicBooth R User manual

Desk
Model R/L
Installation Manual

Desk | 1 uni.
Included
Not included
Screwdriver
Material Needed
Reinforcement Bar | 1 uni.
Connection plate | 1uni.
Support bracket | 2 uni.
Hole covers Screws

1Center the largest hole of the bracket with the at head that is xed on the structure.
The bracket should rest against the rear part of the structure. Fix the screws with a screwdriver or electric
screwdriver. Repeat the step for the other bracket.
2 Fix the desk using the supplied screws. Apply the hole covers.

3 Fix the reinforcement bar under the desk by screwing it to the structure.
± 25mm
4If you have chosen to buy two desks, join them together with the help of the connection plate supplied.
Step’s Material
Screwdriver

If the desk is a right side version, the assembly will be reversed.
i

© Vicoustic, 2021 | V2
No parts of this document might be copied and/or
published without written consent of Vicoustic.
Main Oce, R&D & Logistics
Avenida do Pólo 3, Nº 159, Carvalhosa
4590-137 Paços de Ferreira, Portugal
Oce
Rua Quinta do Bom Retiro Nº 16, Armazém 9
2820-690 Charneca da Caparica, Portugal
T ([phone]
Info and Sales
E [e-mail]
www.vicoustic.com