Vicoustic VicBooth C User manual

Desk
Model C
Installation Manual

1Center the largest hole of the bracket with the at head that is xed on the structure.
The bracket should rest against the rear part of the structure. Fix the screws with a screwdriver or electric
screwdriver. Repeat the step for the remaining bracket.
Material Needed
Reinforcement Bar | 1 uni.Desk | 1 uni.
Included
Not included
Screwdriver
Connection plate | 1uni.
Support bracket | 2 uni.
Hole covers Screws

2 Fix the desk top using the supplied screws. Apply the hole covers.
Step’s Material
6mm Phillips Screwdriver
± 25mm
3 Fix the reinforcement bar under the desk top by screwing it to the structure.
4If you have chosen to buy two desktops, join them together with the help of the connection plate supplied.

© Vicoustic, 2021 | V2
No parts of this document might be copied and/or
published without written consent of Vicoustic.
Main Oce, R&D & Logistics
Avenida do Pólo 3, Nº 159, Carvalhosa
4590-137 Paços de Ferreira, Portugal
Oce
Rua Quinta do Bom Retiro Nº 16, Armazém 9
2820-690 Charneca da Caparica, Portugal
T ([phone]
Info and Sales
E [e-mail]
www.vicoustic.com