Victorwood T-220 User manual

Neon Phone User Manual
P.1out of 4
T-220 Desktop Feature Phone with Neon light User Manual
I. FEATURES
1. Tone/Pulse Switch
2. Dialing Keypad
3. Mute Button
4. Pause Button
5. Flash Button
6. Redial Button
7. Light On/Off Switch
8. Ringer Hi/Lo/Off Switch
9. DC 9V jack
7
3
24
1
98
0 # 6
4
65
R
P
5
32
On Off
DC 9V Light
9
Hi Lo Off
Ringer
P T
7 18
II. Installation
1. Plug one end of the supplied line cord into the jack on the back of base, and plug
the cord’s other end into a modular phone line jack.
Insert the supplied AC adapter’s barrel plug into the DC 9V jack on the back of
the phone. Then plug the other end of the adapter into a standard AC outlet.
2. Set Light “On/ Off ”to “On”to turn on the neon light or “Off ”to turn off the
light Note: If you set the switch to “On”, the phone lights when the handset is on
the base and in between each ring. If you set the switch to “Off ”, the phone only

Neon Phone User Manual
P.2out of 4
lights during each ring.
3. Set Ringer to “Hi/ Lo/ Off ”for a high-or low- volume ring, or to turn off the
ringer. You can make calls with the ringer off, and you can receive calls if you
hear another phone on the same line ringing.
III. Operation
1. Making a phone call
Picking up the handset and listen for a dial tone, enter the phone number you wish
to dial on the keypad.
2. Receiving a call
Whenever the phone rings, pick it up and use it as your would with a standard
telephone.
3. Ending a call
When you finish your conversation, return the handset to the cradle, or press the
Hook Switch button.
4. Mute Operation
During your phone call, if you want a private conversation not to be heard by the
other party on the line.
a) Press and hold the mute button.
b) To continue your phone call, release the mute button.
5. Flash Function
The line you dialing is busy, you may push the flash button to cut off the line for
dialing other number.
6. Pause Function
In some cases such as PABX or long distance service, PAUSE should be inserted
in dialing sequence. The “PAUSE ”key can be inserted about 4 sounds interval
with no dial output.
7. Setting Tone or Pulse Dialing
Set to “T (Tone) ”or “P (Pulse) ”to match the type of services you have. If you
have pulse (rotary) service, you can switch to “T ”during a call to use the tone
service.

Neon Phone User Manual
P.3out of 4
Important – Please note
This telephone is supplied with power supply type OH-35040DB. To ensure
continued safe operation do not power the telephone from any other type of power
supply.

Neon Phone User Manual
P.4out of 4