Victory GRS-1-S7 User manual

Remote Models Available (Two and Three Section Models Only)
Griddle Stand Refrigerators
Cabinet:
The cabinet front and drawers are
constructed of heavy gauge polished
stainless steel to maintain an attractive
appearance after years of heavy use.
Foamed-in-place polyurethane insulation
throughout the cabinet and drawers
ensures the ultimate in energy efficiency.
Drawers:
Easy glide drawers are mounted on heavy-
duty 250 pound test tracks and have self-
adjusting magnetic gaskets for positive
sealing action. Humidity control wires
located around the drawer opening prevent
condensation from forming on the cabinet
front and are concealed by a high impact,
non-conductive thermal breaker strip. The
drawer and liner are constructed of
stainless steel, which resists denting and
scratching and is easy to clean.
Refrigeration System:
All components of the self-contained
refrigeration system are contained within a
side mounted housing and concealed behind
a louvered grille. All condensate water is
disposed of automatically by the energy
efficient condensate evaporator, no plumbing
is required.
Standard Features
• Dial Thermometer
• Stainless Steel Case Front, Drawers and
Sides
• Heavy-Duty Drawer Track - 250 lb. Test
• Adjustable Stainless Steel Legs
• Safety Grip Handles
• One Piece Self-Adjusting Magnetic Gaskets
• Condensate Automatically Evaporated
• Energy Efficient Refrigeration System
• Environmentally Friendly R-134a Refrigerant
• Stainless Steel Sub Top
Optional Features and Accessories
• Stainless Steel Top and Back
• 3” or 5" Diameter Heavy-Duty Swivel Casters
• Remote Models (Two and Three Section
Models Only)
Note: Drawer pans by others (Each drawer
frame will accept two 12 x 10”pans up to 4”
deep.)
GRS MODELS —
Stainless steel
exterior and
interior.
GRS-1-S7
GRS-2-S7
GRS-3-S7
GRS-2-S7
Stainless Steel Tops are Optional
Victory Refrigeration, Inc. I 110 Woodcrest Road I Cherry Hill, NJ 08003 USA I Phone: [phone] I Fax: [phone] I E-mail: [e-mail]
Victory Refrigeration specification sheets
are available online at www.victory-refrig.com.
Approvals:
Project:
Location:
Item #:
Quantity:

Victory participates in the KCL CADalog, the most current source of CAD symbols for foodservice designers worldwide. Symbols include
standard equipment in plan, side, front and 3-D views, layered for FEDA/FCSI recommended guidelines.
Continuous product development may necessitate specification changes and design without notice.
Victory Refrigeration, Inc. Griddle Stand Refrigerators
FOR REMOTE MODELS– Substitute an “R” for the “S” in suffix. For
example: Model GRS-1D-S7 (self-contained) would be GRS-1D-R7
remote cabinet. Air circulating fans, expansion valve and plasticized
coil are provided. Condensing units not supplied. The following units
are recommended with
1/2
” O.D. Suction line,
1/4
” O.D. Liquid line.
Dimensional tolerance ± 1/4” Metric dimensions (MM)
REMOTE REFRIGERATION
Cond. Unit BTUH Cabinet Amps
Two Section
1/4
H.P. 2030 115/60/1 4.3
Three Section
1/4
H.P. 2030 115/60/1 4.5
Copyright June 2009
Printed in U.S.A. 063009
SELF CONTAINED
LEFT END SIDE VIEW
REMOTE
LEFT END SIDE VIEW
50.12
(1273)
19.50
(495)
6.00 (152)
30.87
(784)
2.00
(51)
19.81
(503)
30.87
(784)
15.75
(400)
MACHINE
COMPARTMENT
3.00
(76)
5.00 (127) 6.00 (152)
7.75
(197)
6.00 (152)
8.12
(206)
3.62
(92)
3.62
(92)
ELEC.
CONN.
CONDENSATE
VAPORIZER
REFRIGERATION
LINE CONN.
ELEC.
CONN.
DRAIN
CONN.
77.25
(1962)
19.81
(503)
6.00 (152)
19.50
(495)
19.81
(503)
105.00
(2667)
19.81
(503)
19.81
(503)
19.50
(495)
6.00 (152)
19.81
(503)
8.12
(206)
44.38
(1127)
8.12
(206)
TWO THREE
ONE TWO THREE SECTION SECTION
CHARACTERISTICS SECTION SECTION SECTION REMOTE REMOTE
Width, Overall 50 1/877 1/4105 60 1/287 5/8
Depth, Overall (incl. drawers) 32 7/832 7/832 7/832 7/832 7/8
Height, Case (incl. adj. legs) 25 1/225 1/225 1/225 1/225 1/2
Height, Case with
Stainless Steel Top incl. adj. legs) 26 1/426 1/426 1/426 1/426 1/4
Capacity Net (cubic feet) 6.0 12.0 18.0 12.0 18.0
No. of Drawers 2 4 6 4 6
No. of 12 x 20 Pans (not furnished) 4 8 12 8 12
Cabinet Voltage 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1
Feed Wires 2 2 2 2 2
Condensing Unit Voltage 115/60/1 115/60/1 115/60/1 ------ ------
Condensing Unit Size (HP) 1/41/41/4------ ------
Total Amperes 8.0 8.3 8.6 ------ ------
Crated dim. & wts. Ht. Width Depth Cu. Ft. Lbs
One Section 34 1/456 1/436 3/443.1 320
Two Section 34 1/483 1/438 3/463.9 400
Three Section 34 1/4111 38 3/485.3 560
NOTE: If cabinet is located
directly against wall an all
around clearance of 2” is
required.
Maximum load to be placed
on top of griddle stand unit is:
GRS -1 = 450 lbs
GRS -2 = 800 lbs
GRS -3 = 1300 lbs
We reserve the right to
change specifications and
product design without
notice. Such revisions do
not entitle the buyer to
corresponding changes,
improvements, additions or
replacements for previously
purchased equipment.