Victrola Vsg-160 User manual

Model: VSG-160

Instruction Manual

Bluetooth Headphones

PLEASE READ THIS INSTRUCTION MANUAL CAREFULLY BEFORE USE

AND KEEP IT FOR FUTURE REFERENCE.

SPECIFICATIONS

SPEAKER .............................................................................................40mm

BLUETOOTH VERSION ............................................................................ 4.1

IMPEDANCE...................................................................................... 32 Ohm

SENSITIVITY............................................................107+/-3dB (1KHz. 1mW)

FREQUENCY RESPONSE ........................................................20Hz~20KHz

MAXIMUM POWER INPUT.................................................................30 mW

AUX INPUT ..........................................................................................3.5mm

CHARGE TIME ....................................................................................... 4 hrs

WORKING HOURS.................................................................... Over 4 hours

BATTERY CAPACITY ........................................................................250mAh

RATED VOLTAGE ............................................................USB DC 5V 150mA

AUDIO CABLE.........................................................3.5mm Gold Plated Plug

ACCESSORIES INCLUDED...........................................................................

Please note: As a result of continual improvements, the design and

specifications of this product are subject to change without notice.

Bluetooth is a registered trademark of Bluetooth SIG, Inc.

Other trademarks and trade names are those of their respective owners.

Made in China.

�Bluetooth Headphones

�Instruction Manual

�Charging Cable

�3.5mm AUX Cable

SAFETY INSTRUCTIONS

Please be sure to read the following instructions before using the

Bluetooth Headphones:

1. The device is not intended for use by persons (including children) with

reduced physical, sensory or mental capacity. Persons who have not read

the manual, unless they have received explanations by a person

responsible for their safety and supervision, should not use this device.

Children should be monitored to ensure that they do not play with the device.

3. The device should always be readily accessible. 

4. The device should not be exposed to dripping or splashing water. 

5. Always leave a minimum distance of 10 cm around the unit to ensure

sufficient ventilation. 

Open flame sources, such as candles, should not be placed on top of the device.

7. The device is intended for use only in a temperate climate. 

8. At full volume, prolonged listening to the portable audio device may

damage the user’s hearing and cause hearing trouble (temporary or

permanent deafness, hearing drone, tinnitus, hyperacusis). 

9. It is recommended not to listen to the device at high audio volume and

no more than one hour per day at medium audio volume. 

10. The battery can’t be replaced by the user, but only by the maker of this

product, the after sales department or a qualified person.  

11. SWITCH OFF IN RESTRICTED AREAS: Switch the device off where the

use of the device is not allowed or where there is a risk of causing

interference or danger, for example on board an aircraft, near medical

equipment, fuel, chemicals or blasting sites.

12. ROAD SAFETY COMES FIRST: Check the current laws and regulations

regarding the use of this device in the areas where you drive. Do not

handle the device when driving. Concentrate fully on driving. 

13. Radio signals could affect some of the car’s electronic systems such as

the audio stereo and alarm systems. 

14. INTERFERENCE: All wireless devices are susceptible to interference

which may affect their performance. 

15. All our devices conform to international standards and regulations, and if

need be national ones, with a view to limiting user exposure to

electromagnetic fields. These standards and regulations were adopted

after the completion of extensive scientific research. This research

established no link between the use of the mobile headset and any

adverse effects on health if the device is used in accordance with

standard practices.

AUTHORIZED PERSONNEL

1. Only qualified people are authorized to install or repair this product.

2. Only use batteries, chargers and other accessories which are compatible

with this equipment. Do not connect incompatible products.

KEEP THE EQUIPMENT DRY



1. This equipment is not water proof. Keep it dry.



KEEP OUT OF REACH OF CHILDREN



1. Keep your device in a safe place, out of the reach of young children.

The device contains small parts that may present a choking hazard.

Please be sure to read the following instructions before using the

Bluetooth Headphones:

1. The device is not intended for use by persons (including children) with

reduced physical, sensory or mental capacity. Persons who have not read

the manual, unless they have received explanations by a person

responsible for their safety and supervision, should not use this device.

Children should be monitored to ensure that they do not play with the device.

3. The device should always be readily accessible. 

4. The device should not be exposed to dripping or splashing water. 

5. Always leave a minimum distance of 10 cm around the unit to ensure

sufficient ventilation. 

Open flame sources, such as candles, should not be placed on top of the device.

7. The device is intended for use only in a temperate climate. 

8. At full volume, prolonged listening to the portable audio device may

damage the user’s hearing and cause hearing trouble (temporary or

permanent deafness, hearing drone, tinnitus, hyperacusis). 

9. It is recommended not to listen to the device at high audio volume and

no more than one hour per day at medium audio volume. 

10. The battery can’t be replaced by the user, but only by the maker of this

product, the after sales department or a qualified person.  

11. SWITCH OFF IN RESTRICTED AREAS: Switch the device off where the

use of the device is not allowed or where there is a risk of causing

interference or danger, for example on board an aircraft, near medical

equipment, fuel, chemicals or blasting sites.

12. ROAD SAFETY COMES FIRST: Check the current laws and regulations

regarding the use of this device in the areas where you drive. Do not

handle the device when driving. Concentrate fully on driving. 

13. Radio signals could affect some of the car’s electronic systems such as

the audio stereo and alarm systems. 

14. INTERFERENCE: All wireless devices are susceptible to interference

which may affect their performance. 

15. All our devices conform to international standards and regulations, and if

need be national ones, with a view to limiting user exposure to

electromagnetic fields. These standards and regulations were adopted

after the completion of extensive scientific research. This research

established no link between the use of the mobile headset and any

adverse effects on health if the device is used in accordance with

standard practices.

AUTHORIZED PERSONNEL

1. Only qualified people are authorized to install or repair this product.

2. Only use batteries, chargers and other accessories which are compatible

with this equipment. Do not connect incompatible products.

KEEP THE EQUIPMENT DRY



1. This equipment is not water proof. Keep it dry.



KEEP OUT OF REACH OF CHILDREN



1. Keep your device in a safe place, out of the reach of young children.

The device contains small parts that may present a choking hazard.

FUNCTIONS

POWERING HEADPHONES ON & OFF 

1. Press and hold Power Button ( ) to power ON or OFF.

NOTE: Powering ON: LED will illuminate PURPLE then flash BLUE,

Powering OFF: LED will illuminate PURPLE, then turn off.

2. Listen for audible tone.

(LED will not illuminate when Headphones are off.)

To Change the Audio Track:

1. Press and hold (+) to go to the next track.

2. Press and hold (-) to restart current track. Press and hold (-) again

to go to previous track.

3. Quickly press the Power Button ( ) to pause current track.

Volume:

1. Press (+) button incrementally to increase volume.

2. Press (-) button incrementally to decrease volume.

Microphone

Volume Up/

Next Track

Volume Down/

Previous Track

Aux-In Port

Charging/

Micro USB

Power/

Play/Pause/

Answer/End Call

LED Indicator

CHARGING THE BATTERY

1. Connect USB cable to general USB Power Supply.

2. Connect charger to the outlet.

3. When the charger is connected to the headset, the LED indicator light

will remain lit RED. The Headphones will be fully charged in 4 (four)

hours. The LED indicator will turn BLUE and remain lit.

4. Once fully charged, disconnect the charger from the headphones and

outlet. The headset is now ready for use.

NOTE: The fully charged battery has power for around 5 hours of talk

time, 4.5 hours music play time, and up to 200+ hours of standby time.

However, both talk and standby times may vary when used with

different mobile phones or other compatible Bluetooth devices, usage

settings, usage styles, and environments. When the battery power is

low, the headset will give a "Low Battery" alert every 20 seconds and

the red indicator light will start to flash. When using the headphones

with an iPhone, an additional battery meter will be shown with the

remaining battery capacity displayed on your phone.

CAUTION:

The built-in rechargeable battery is not replaceable. Do not remove or

replace it, do not throw in the trash or in a ﬁre. Do not dispose device in

standard garbage disposal sites. Dispose of device at available Battery

Recycling Sites after fully discharging battery. Not doing so may violate

local disposal laws and regulations. Please refer to local regulations for

proper battery disposal.

PAIRING THE HEADPHONES TO BLUETOOTH

AUX-IN FUNCTION

PHONE CALL FUNCTION

1. Use the included 3.5mm AUX-IN cable to connect the Headphones

with an audio device such as an MP3/MP4 player, smartphone

or tablet.

2. Your Audio device (MP3/MP4 player, smartphone or tablet) controls the

music playback.

3. Adjust the volume on your device.

NOTE: Volume controls on the headphone will be deactivated when

using the AUX-IN function.

Answer: Press the Answer button ( ) quickly to answer the incoming call.

Reject: Press and hold Answer button ( ) for 2 seconds to reject the

incoming call.

End a call: Press the Answer button ( ) quickly to end a call.

Re-dial last number: At standby status, double press Answer Button ( )

to re-dial the last number.

Before using the headset for the first time, you must pair the unit with a

Bluetooth enabled device. Pairing is a one-time process and is required

only for the first connection with the mobile phone.

Keep headphones within a 33 ft (10 m) range of a Bluetooth enabled device.

2. Press and hold the Power/Play button ( ) for about 5 seconds until the

indicator light will flash red and blue intermittently. The device is now in

pairing mode.

3. Find the Bluetooth settings of your mobile phone and search for

available Bluetooth devices.

4. Choose “VSG-160” from the list of available Bluetooth devices.

5. If required, enter the PIN code “0000” and confirm the entry. Once the

pairing process is successful, the headphones will connect to your

device automatically. The indicator light will flash blue every 5 seconds

when the headset is in standby mode.

IMPORTANT INFORMATION

CALIFORNIA PROP 65 WARNING

"WARNING" This product contains chemicals known to the State of

California to cause birth defects or other reproductive harm. For more

information on these regulations and a list of chemicals, log on the

following website address: http://www.oehha.ca.gov/prop65.html

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject

to the following two conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the

limits for Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful

interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and the receiver.

- Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

INDUSTRY CANADA

This device complies with Industry Canada license-exempt RSS

standard(s). Operation is subject to the following two conditions: (1) this

device may not cause interference, and (2) this device must accept any

interference, including interference that may cause undesired operation of

the device.

le présent appareil est conforme aux CNR d’Industrie Canada applicables

aux appareils radio exempts de licence. L’exploitation est autorisée aux

deux conditions suivates: (1) I’appareil ne doit pas produire de brouillage, et

(2) I’utilisateur de l’appareil doit accepter tout brouillage radioélectriue subi,

même si le brouillae est suscetible d’en comromettre le fonctionnement.

WARRANTY

Victrola is a registered trademark of Innovative Technology Electronics LLC.

Innovative Technology Electronics LLC.

Limited Warranty: 90 Days Labor, One Year Parts

Innovative Technology Electronics LLC. (IT) warrants the product to be free from

“Defects” in materials under normal use for a period of “One Year” from the date of the

original purchase. The Warranty is “Not” transferable. IT agrees, within the initial “90

Day” period, to repair or replace the product if it is determined to be defective at “No

Charge”. It is further agreed that IT will cover the cost to repair or replace damaged

“Parts” only for a total period of “One Year” from the date of the original purchase. The

warranty does not cover cosmetic damage, antennas, AC cords, cabinets, headbands,

ear-pads, or damage due to line power surges, connection to improper voltage supply

or settings, misuse, mishandling, accident, acts of God or attempted repair by an

unauthorized service agent.

To obtain service, the purchaser MUST present an original sales receipt / proof of

purchase. Please contact us at www.ithomeproducts.com to request an RMA

(Return Material Authorization) number to return products for service or

replacement. Returns without an RMA number on the package will be refused and

returned to sender. Upon receipt of the returning item and our full inspection (IT) may

issue a replacement to customer for the same item or of one that has equivalent value

and features. To return an item, supply full name, return address, phone number, item

purchased, receipt of purchase and reason for return to obtain RMA number.

All returns must be in the original packaging or reasonable substitute to prevent

damage. Customer “Must” include full name, shipping address and telephone number

inside of package. No return will be shipped back to a PO Box or APO address.

Please include your check or money order in the amount of:

• USD $5.00 for items $10.00 to $39.99 (Price Paid Per Unit)

• USD $10.00 for items $40.00 to $99.99. (Price Paid Per Unit)

• USD $16.00, for items $100.00 and up. (Price Paid Per Unit)

• Shipping fees are non-refundable

to be payable to Innovative Technology Electronics LLC. (for handling and return

shipping charges) (IT) will not be responsible for delays or unprocessed claims

resulting from a purchaser’s failure to provide any / all of the necessary information.

Send all inquiries or RMA request via our website

www.ithomeproducts.com/support.

Innovative Technology Electronics LLC.

1 Channel Drive

Port Washington, NY 11050

Toll free: 1-877-483-2497

Website for support: www.ithomeproducts.com/support

There are no express warranties except as listed above.

REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE

EXCLUSIVE REMEDY OF THE CUSTOMER, (IT) SHALL NOT BE LIABLE FOR ANY

INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR

IMPLIED WARRANTY ON THIS PRODUCT EXCEPT TO THE EXTENT PROHIBITED BY

APPLICABLE LAW. ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS

FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO

THE DURATION OF THIS WARRANTY.

Some states do not allow the exclusion or limitation of incidental or consequential

damages, or limitations on how long an implied warranty lasts, so the above

exclusions or limitations may not apply to you. This warranty gives you specific legal

rights and you may also have other rights, which vary from state to state.