Victron energy Smart Battery Sense User manual

2020-11-10 02:26 1/2
Victron Energy - https://www.victronenergy.com/live/
Smart Battery Sense manual
1. Introduction
The Smart Battery Sense is a wireless battery voltage- and temperature- sensor for Victron MPPT
Solar Chargers.
The Solar Charger uses these measurements to optimize its charge parameters. This will improve
charging-efficiency and prolong battery life.
The connection between the Smart Battery Sense and the Solar Charger(s) wireless: VE.Smart
Network, a wireless technology that is based on Bluetooth Smart.
Simple to install & configure, the Smart Battery Sense comes with an inline fuse and pre-crimped
eyelets. And adhesive tape on the back, to mount it on the battery.
System design & component selection
Check the VE.Smart Networking compatible products list for compatible Solar Chargers.
The Smart Battery Sense is not needed, nor allowed, in systems that also have a Color Control
GX or Venus GX, see FAQ Q6 for more info.
The Smart Battery Sense is not needed for installations that already have a BMV-712 with its
temperature sensor accessory.
For installations with a BMV-702 + temperature sensor accessory, consider adding a VE.Direct
Bluetooth Smart dongle instead of a Smart Battery Sense.
2. Installation
Connect the unit's two eyelets to your battery terminals and attach it directly onto the battery-body
using its self-adhesive strip.
For battery banks consisting of multiple individual batteries, connect the Smart Battery Sense unit on
any one of the batteries.
In case the supplied bat+ and bat- cables are not long enough, their length can be increased. Make
sure to use the same, or thicker, gauge cable.
4. Configuration
See this below video. Also, see the step by step procedure as documented in the ve-smart-networking
manual.

Last update: 2018-03-04
22:29 smart_battery_sense_manual https://www.victronenergy.com/live/smart_battery_sense_manual?rev=1520198972
https://www.victronenergy.com/live/ Printed on 2020-11-10 02:26
Video
5. Trouble shooting
See both the VictronConnect manual and the VE.Smart Network manual.
DISQUS
View the discussion thread.
From:
https://www.victronenergy.com/live/ - Victron Energy
Permanent link:
https://www.victronenergy.com/live/smart_battery_sense_manual?rev=1520198972
Last update: 2018-03-04 22:29