Videosec RS1 User manual

● Output signal: RF(2.4GHz)
● Working voltage: 3VDC(AAA*2pcs)
● Working current: ＜5mA
● Standby current: ＜10μA
● Standby time: 2 years
Technical parameter
● Apply to single color or dual color LED controller, dimming driver or smart lamp.
● Ultra sensitive color adjustment touch wheel.
● Adopt 2.4GHz wireless technology, remote distance up to 30m.
● Each remote can match one or more receiver.
● . Battery powered (2 x AAA)
● Operate with LED indicator light.
4 Zone Dimming and CCT RF Remote Controller
Feature
User Guide
● Remote distance: 30m
● Working temperature: -30℃~55℃
● Dimension: L155×W43×H17.5mm
● Weight: 156g
Key function
Match with controller(without match key), dimming driver or smart lamp
1. Match: Switch off the power, then switch on power again,
short press on/off key or zone key 3 times on the remote quickly within 5s after power on,
the link is done once the light blinks 3 times.
2. Delete: Switch off the power, then switch on power again,
short press on/off key or zone key 5 times on the remote quickly within 5s after power on,
the unlink is done once the light blinks 5 times.
3. Multiple zone remote only use zone key to match each zone receiver.
Match with controller(with match key)
1. Match: Short press match key, within 5s, press on/off key or zone key of the remote.
2. Delete: Long press match key for 5s, delete all matched remote.
3. Multiple zone remote only use zone key to match each zone receiver.
Match guide
Operation
● When turn on light, the indicator display blue. when turn off light, the indicator display red.
● When touch the color wheel, the indicator will display the same color.
● When press or touch operation is invalid (If the light is off), the indicator display red.
● To extend battery life, no touch or press key operation after a few seconds,
the touch wheel will enter sleep state, you need press any key to make touch wheel quit sleep state.
● RS1: 4 zone dimmer remote
1
S1
2
3
4
All
I
O
I
O
I
O
I
O
I
O
S2S3
Turn off all 4 zone light
Touch brightness wheel.
(Short press multiple zone on key fastly,
will select multiple zone,
then touch wheel to adjust brightness synchronously.)
Turn on all 4 zone light
Turn off 1/2/3/4 zone light
3 scene memory,
short press recall the scene,
long press 2s save current color into S1/2/3.
4 zone recall or save synchronously.
(Long press zone on key
increase zone brightness.)
(Long press zone off key
decrease zone brightness.)
Turn on 1/2/3/4 zone light
I
I
I
I
I
S1
1
2
3
4
All O
O
O
O
O
S2S3
Turn off all 4 zone light
Touch color temperature wheel.
(Short press multiple zone on key fastly,
will select multiple zone,then touch wheel
to adjust color temperature synchronously.)
Turn on all 4 zone light
3 scene memory,
short press recall the scene,
long press 2s save current color into S1/2/3.
4 zone recall or save synchronously.
● RS2: 4 zone color temperature remote
Turn off 1/2/3/4 zone light
(Long press zone on key
increase zone brightness.)
(Long press zone off key
decrease zone brightness.)
Turn on 1/2/3/4 zone light
Remote match with 2.4G RF controller, dimming driver or smart lamp. there are two kinds of method
to match receivers.
● Use Power-up
● Use Match key

● RS6: 4 channel dimmer remote
S1
All
I
O
I
O
I
O
I
O
I
O
S2S3
CH1
CH2
CH3
CH4
Turn off all 4 channel light
Turn on all 4 channel light
Turn off 1/2/3/4 channel lightTurn on 1/2/3/4 channel light
3 scene memory,
short press recall the scene,
long press 2s save current color into S1/2/3.
4 channel recall or save synchronously.
Touch brightness wheel.
(Short press multiple channel on key fastly,
will select multiple channel,
then touch wheel to adjust brightness synchronously.)
Note: RS6 match with 4 channel receiver only, such as V4,
each channel connect with one single color LED strip.
(Long press channel on key
increase channel brightness.)
(Long press channel off key
decrease channel brightness.)
Safety information
1. Read all instructions carefully before you begin this installation.
2. When installing battery, pay attention to the battery positive and negative polarity.
A long time without the remote control, remove the battery.
When remote distance becomes smaller and insensitive, replace the battery.
3. If no response from the receiver, please re-match the remote.
4. Gently handle remote, beware of falling.
5. For indoor and dry location use only.
Dimension
43.00 mm
155.00 mm
17.50 mm
HD
Distributor:
Euro Tech Corporation Ltd.
6724 Szeged, Hungary
Üstökös str. 12/b
Web: www.videosec.com