Videsur-electronic VSD1CH-K2 User manual

1
SD Card Recorder
VSD1CH-K2
Instructions
GuangdongVidesurElectronic Co.,Limited
2009-07-02 Ver1.1

2
Function:
lCartoon style, intruders can not easy be found, D.I.Y users
to install, easy to operate.
lCan play on yourcomputer and storerecorded video. And
simultaneously record the time and date.
lImmediately after boot isturned intothe smart”working
condition, when the detected object when the work will start
automatically.
lMemory using SD or TF card, maximum support 8GB.
lHigh compression ratio of video storage format. In the
2GB card can store 24 hours (in the test conditions).
lImage storage based on FIFO”principle. Automatically
overwrite the old data.And maintain data in real-time
update.
lImage clarity, resolution VGA (640x48).
lWith infrared night visiondevice can be in theevening
to work.
lAC Adapter with power supply. To ensure that the work can
continue.
lCan be widely used in home security,traffic monitoring.
Security offices and shops.

3
ProductMap:
Instructions
* The Machine Instructions:
1. Insert SD or TF card into socket.
2. Slide power switch to "on" position.
3. After boot, the state of the bodywill be shining alight
at this time if the camera monitoring of objects within the
scope of activities, the statusindicator will be made every
certain period of time(about 10s)flashes once, otherwise
the indicator will be extinguished,and there is anobject
until the next activity will shine.
4. If you need to watch the data which Was recorded on SD/TF
card through the PC, please turn off the machine power to
remove the SD or TF Card, then connect to computer.

4
5. You can use the IPVIEW to playbackdata which Was recorded
on SD/TF card, Pleaserefer tothe next section describes.
*PC Instructions:
1.Put the distributionof theCD into the computer CD-ROME.
2. Copy the IPViewer.exe to the desktop. At this point the
screen will appear on the following icon:
3Double-click the icon, the following interface will appear:
Instructionsareasfollows:

5
HowtoPlay
Connect SD/TF Card with a computer.
Running IPViewer.exe.
Press the " " button, Select the path of the file which
you want to play, please refer to the next map：
Steps

6

7
Time and date settings
Create a TXT file on your computer.
Input time and date inthe first lineof the TXT file.Format
is as follows:
Year WeekMonths Date hour Min Sec
00-9901-0701-1201-3100-23 00-5900-59
For example:09050619135611 Means：2009，Friday，June 19，
13:56:11.

8
Note:
1. Can not have spaces.
2. Typing must proceed fromthe first line of the firstword
in the TXT file.
3. The TXT file name must be TIME.TXT, all the letters must
be uppercase. And storethe TXTfilein the SD-DVRfolder.
4. When this SDcard is placedin the machine, the timeand
date will be automatically updated,TIME.EXE will also be
automatically deleted
Battery
1. The machine using alithium battery. It’senough to make
the machine work 4.5hours Under normal conditions.
2. When the battery will be exhausted, Recorded image will
appear on the spots and the horizontal line, At this time,
please recharge the battery.
3.For safety considerations, be sure to use our matching
charger. Charging time is about 3 hours.
Specifications：
Video Format: Motion Jpeg, resolution: VGA (640*480)
Frame rate:5FPS/S
Motion detection function of the image: The machine will
record under the condition of an object movement. Delay of
about 10s.
Storage mode: SD Card,( Maximumsupport 32GB) The following
SD Card 2G Pleaseuse formatFAT16 file format; SD Card2G
above please use the FAT16 file format.

9
Power：7V lithium battery or 5V Adapter.
Power consumption：3.7V/150mA (working state) 3.7V/110Ma
(standby state).
With RTC function：Andtime anddate shown on thevideo
shooting.
Time：1G SD card can record 10 hours or more (Intelligent
mode).
Data automatically replace function：When the memory card
deposit will be automatically deleted upon expiry of the
earliest recorded content.
FrequentlyAskedQuestions
Can not boot?
Please check the battery charge. ACpower adapter can be
used to check it.
spots or horizontal line in the image?
When the battery runs out this situation will arise, Please
charge to the battery in time.
After booting the machine status indicators flash three
times without any reaction?
This shows that the machineis not inserted SD /TF Card,
or SD/TF Card is broken.
Time is not accurate?
Please follow the instructions inthe instructions to
adjust.
In the night vision mode, the image is black and white?
Opening night vision mode, in order to eliminate
unnecessary interference, the machine will automatically
remove the color in orderto ensureimage quality. In the
light will be strong enough to restore color.