Viessmann Vitodens 200-W System Instruction manual

Technical Data Manual
VITODENS
r
200-W
5683 717 - 03 09/2014
Model Nos. and pricing: see Price List
For Natural Gas and Liquid Propane Gas
Gas-fired wall-mounted condensing boiler
12 to 285 MBH (3.5 to 83.5 kW)
Multi-boiler installation 480 to 2280 MBH
for models 45, 60 and 80
Product may not be exactly as shown
Vitodens 200-W
Series B2HA, Models 19, 28, 35, 45, 60 and 80
Gas-Fired Wall-Mounted Condensing Boiler
with modulating MatriX cylinder burner for
room air independent operation (using a
direct vent system) or room air dependent
operation.
H

Vitodens 200-W, B2HA 19 to 80 Technical Data
5683 717 - 03
2
Product Information
Vitodens 200-W
2
Equipped with the industry’s first intelligent combustion
management system and powerful control technology,
the new generation Vitodens 200-W gas-fired wall-mount
condensing boiler delivers unparalleled performance,
reliability and comfort.
The benefits at a glance:
■Best value in its class with new industry-leading
technology and the most standard features.
■Highest Efficiency up to 98% at full modulation and up
to 93.3% A.F.U.E.
■Lasting performance with industry-leading Viessmann
made SA240 316 Ti stainless steel Inox-Radial heat
exchanger constructed to CSA B51 and ASME Section IV.
■Low Emission Combustion with Viessmann made
stainless steel MatriX cylinder burner. Factory calibrated.
■Fast Installation and Reduced Maintenance with Lambda
Pro, industry-first intelligent combustion management
system: Adjusts automatically to gas type and quality.
No fuel conversion kit required.
■Powerful and User-friendly
Viessmann Vitotronic on-board multi-function outdoor
reset boiler and system control for multi-temperature
space and DHW heating.
■Expanded Application Range with increased capacity
up to 285 MBH (83 kW). Multi-boiler installation up to
2280 MBH (668 kW) with up to 8 boilers (models B2HA
45, 60, 80).
■Greater Venting Flexibility with increased vent length
up to 180 ft. (55 m) and multiple venting options.
- Horizontal or vertical sealed combustion coaxial
venting (field supplied).
- Horizontal, vertical or hybrid sealed combustion
double-pipe venting (field supplied).
- Horizontal or vertical single-wall venting (field
supplied).
■Compact, Esthetic Product Design and zero clearance
to combustibles.
■Extremely Quiet Operation; quieter than most
refrigerators.
■True High-Altitude Operation up to 10,000 ft. (3,000 m)
with simple electronic adjustment.
■Efficiency up to 98% through intensive condensation.
The flue gas temperature is only approximately 9-27º F
(5-15º C) above boiler return temperature (see chart
below).

Vitodens 200-W, B2HA 19 to 80 Technical Data
3
5683 717 - 03
Product Information
3
Cross-Section
Product may not be exactly as shown
The flue gas temperature is only approximately 9-27º F
(5-15º C) above boiler return temperature (see chart
below).
AInox-Radial heat exchanger made from stainless steel
– for high operational reliability and a long service life.
Large heating output in the smallest of spaces
B Modulating MatriX cylinder burner for extremely
clean combustion and quiet operation
CVariable speed combustion fan for quiet and
economical operation
DGas and water connections
EDigital boiler control unit
Delivered condition
Wall mounted gas condensing boiler with Inox-Radial heat
exchanger, modulating MatriX cylinder burner for natural
gas and LPG, plus wall mounting bracket. Vitotronic 200
for weather-compensated operation. Preset for operation
with natural gas. Fully plumbed and wired. White epoxy-
coated casing.
Vitodens 200-W B2HA 19, 28, 35, 45, 60, 80

Vitodens 200-W, B2HA 19 to 80 Technical Data
5683 717 - 03
4
Technical Data
Technical Data
4
Boiler Model No. 200-W B2HA 19 28 35 45 60 80
Natural Gas / Liquid Propane Gas
CSA input
CSA output/DOE *1
heating capacity
Net AHRI rating *2
MBH
kW
MBH
kW
MBH
kW
12-67
3.5-20
10.9-61
3.2-18
53
15.5
19-100
5.5-29
17.4-91.2
5-27
79.3
23.2
19-125
5.5-37
17.4-114
5-33
99
29
60-160
17.5-47
55-146
16-43
127
37
60-212
17.5-62
55-194
16-57
169
49.5
104-285
30-83
95-260
28-76
226
66.2
Heat exchanger surface area ft.2
m2
10.89
1.01
10.89
1.01
10.89
1.01
15.76
1.46
15.76
1.46
28.88
2.68
Min. gas supply pressure
Natural gas
Liquid propane gas
“w.c.
“w.c.
4
10
4
10
4
10
4
10
4
10
4
10
Max. gas supply pressure *3
Natural gas
Liquid propane gas
“w.c.
“w.c.
14
14
14
14
14
14
14
14
14
14
14
14
A.F.U.E. % 93.3 93.3 93.3 92.0 92.0 92.0
Weight lbs
kg
101
46
106
48
106
48
155
72
155
72
194
88
Boiler water content USG
L
0.87
3.27
0.87
3.27
0.87
3.27
1.9
7.0
1.9
7.0
3.4
12.8
Boiler max. flow rate *4 GPM
L/h
6.2
1400
6.2
1400
6.2
1400
15.4
3500
15.4
3500
25
5700
Max. operating pressure
at 210º F (99º C)
psig
bar
45
3
45
3
45
3
60
4
60
4
60
4
Boiler water temperature
- Adjustable high limit (AHL) range
space heating (steady state)
DHW production
- Fixed high limit (FHL)
ºF
ºC
ºF
ºC
ºF (ºC)
68 to 165
20 to 74
165
74
210 (99)
68 to 165
20 to 74
165
74
210 (99)
68 to 165
20 to 74
165
74
210 (99)
68 to 165
20 to 74
165
74
210 (99)
68 to 165
20 to 74
165
74
210 (99)
68 to 176
20 to 80
176
80
210 (99)
Boiler connections
Boiler heating supply and return
Pressure relief valve
Drain valve
Boiler supply/return for
indirect-fired DHW storage tank
(field supplied)
Gas valve connection
NPTM”
NPTF”
(male
thread)
NPT”
NPTF”
¾
¾
¾
¾
¾
¾
¾
¾
¾
¾
¾
¾
¾
¾
¾
1b
¾
¾
1b
1
1b
¾
¾
1b
1
1b
¾
¾
1b
1
*1 Output based on 140º F (60º C), 120º F (49º C) system supply/return temperature.
*2 Net AHRI rating based on piping and pick-up allowance of 1.15.
*3 If the gas supply pressure exceeds the maximum gas supply pressure value, a separate gas pressure regulator
must be installed upstream of the heating system.
*4 See “Waterside Flow” starting on page 10 in this manual.

Vitodens 200-W, B2HA 19 to 80 Technical Data
5
5683 717 - 03
Technical Data
5
Technical Data
Boiler Model No. 200-W B2HA 19 28 35 45 60 80
Dimensions
Overall depth
Overall width
Overall height
inches
mm
inches
mm
inches
mm
14
360
17¾
450
41
1040
14
360
17¾
450
41
1040
14
360
17¾
450
41
1040
15
380
19
480
405/8
1031
15
380
19
480
405/8
1031
21
530
19
480
43½
1105
Flue gas *5
Temperature (at boiler return
temperature of 86º F (30º C)
- at rated full load
- at rated partial load
Temperature (at boiler return
temperature of 140º F (60º C)
ºF (ºC)
ºF (ºC)
ºF (ºC)
113 (45)
95 (35)
154 (68)
113 (45)
95 (35)
154 (68)
113 (45)
95 (35)
154 (68)
95 (35)
91 (33)
149 (65)
104 (40)
95 (35)
158 (70)
95 (35)
91 (33)
149 (65)
Max. condensate flow rate *6
with natural gas and
TS/TR=122/86º F (50/30º C) USG/h
L/h
0.66
2.5
0.97
3.7
1.21
4.6
1.55
5.9
2.0
7.9
2.77
10.5
Condensate connection *7 hose
nozzle
Ø in ¾-1¾-1¾-1¾-1¾-1¾-1
Boiler flue gas connection *8 Ø
in (mm) 23/8(60) 23/8(60) 23/8(60) 3¼(80) 3¼(80) 43/8(110)
Combustion air supply
connection (coaxial)
outer
Ø in (mm) 4 (100) 4 (100) 4 (100) 5 (125) 5 (125) 6 (150)
Sound Rating
- at maximum input
- at minimum input
dB
dB 41
35
48
36
51
36
56
39
67
39
56
38
*5 Measured flue gas temperature with a combustion air temperature of 68° F (20° C).
*6 Based on maximum input rate.
*7 Requires 1 inch (25 mm) tubing. See the Installation Instructions of the Vitodens 200-W, B2HA for details.
*8 For side wall vent installations (coaxial system):
Do not exceed max. equivalent length specified in the Installation Instructions of the Vitodens 200-W, B2HA
Venting System.
Do not attempt to common-vent Vitodens 200-W with any other appliance.
Side wall co-axial vent installation must include Viessmann protective screen!
For details refer to the Installation Instructions for the Vitodens 200-W, B2HA Venting System.
For information regarding other Viessmann System Technology componentry, please reference documentation
of respective product.
Note: For high altitude installation at 10,000 ft. the input for model B2HA 19-80 will have an altitude
de-ration of 21%.

Vitodens 200-W, B2HA 19 to 80 Technical Data
5683 717 - 03
6
Dimensional Information
Models 200-W, B2HA 19, 28, 35
6
Legend
ABoiler Supply
BGas Connection, ¾” NPTF
C Boiler Return
D Recommended height (single boiler system)
E Condensate drain
FCombustion air intake (left or right)
G Combustion air intake (through co-axial)

Vitodens 200-W, B2HA 19 to 80 Technical Data
7
5683 717 - 03
Dimensional Information
7
Models 200-W, B2HA 45, 60
Legend
ABoiler Supply
BGas Connection, 1” NPTF
C Boiler Return
D Recommended height (single boiler system)
E Condensate drain

Vitodens 200-W, B2HA 19 to 80 Technical Data
5683 717 - 03
8
Dimensional Information
Model B2HA 80
8
Legend
ABoiler Supply
BGas Connection, 1” NPTF
C Boiler Return
D Recommended height (single boiler system)
E Condensate drain

Vitodens 200-W, B2HA 19 to 80 Technical Data
9
5683 717 - 03
Minimum Clearances
9
Recommended Minimum Service Clearances
Minimum Clearances to Combustibles
AL= Alcove
CL= Closet
*1 Refer to the Installation Instructions of the Vitodens
200-W, B2HA Venting System for details.
Note:The Vitodens boiler has passed the zero inches
vent clearance to combustibles testing requirements
dictated by the Harmonized Standard ANSI Z21.13.
CSA 4.9.2000 and therefore is listed for zero
clearance to combustibles when vented with a
single wall special venting system (AL-29-4C
material). The zero inches vent clearance to
combustibles for the Vitodens boiler supercedes
the clearance to combustibles listing that appears
on the special venting system label.
Top Front Rear Left Right Vent
pipe *1
0 0 AL, CL 0000

Vitodens 200-W, B2HA 19 to 80 Technical Data
5683 717 - 03
10
Waterside Flow
Waterside Flow (primary circuit)
Supply head pressure (water)
Flow rate
Supply head pressure (water)
Flow rate
Supply head pressure (water)
Flow rate
Pressure drop (primary circuit) for
Vitodens 200-W, B2HA 45, 60
For sizing an on-site circulation system.
Max. flow rate 15.4 USGPM (3500 L/h)
Pressure drop (primary circuit) for
Vitodens 200-W, B2HA 80
For sizing an on-site circulation system.
Max. flow rate 25 USGPM (5700 L/h)
The Vitodens 200-W, B2HA is designed for closed loop,
forced circulation hot water heating systems only. Use
standard friction loss method for pipe sizing. Observe
boiler maximum and minimum flow rate limitations. If
system flow rate exceeds boiler maximum flow rate
(as stated above), falls below the minimum flow rate
or if system flow rate is unknown, Viessmann strongly
recommends the installation of a low-loss header.
An alternative method may be used, such as primary
secondary piping using closely spaced tees.
A low-loss header offers additional benefits not provided
by a pair of closely spaced tees. Viessmann therefore
strongly recommends and prefers the use of a low-loss
header over closely spaced tees. See pages 32 and 33
for low-loss header information. Once the low-loss header
is connected, the built-in low-loss header logic of the
Vitodens 200-W boiler ensures the required t across the
system through the sensory communication between the
low-loss header and the boiler.
Pressure drop (primary circuit) for
Vitodens 200-W, B2HA 19, 28, 35
For sizing an on-site circulation system.
Max. flow rate: 6.2 GPM (1400 L/h)