ViewSonic VFD1027w-11 User manual

- User Guide
- Guide de l’utilisateur
- Guía del usuario
VFM1027-11M
Digital Photo Frame
ViewSonic®
Model No. : VS13788
IMPORTANT: Please read this User Guide to obtain
important information on installing and using your
product in a safe manner, as well as registering your
product for future service. Warranty information
contained in this User Guide will describe your limited
coverage from ViewSonic Corporation, which is also
found on our web site at http://www.viewsonic.com in
English, or in specic languages using the Regional
selection box in the upper right corner of our website.
“Antes de operar su equipo lea cuidadosamente las
instrucciones en este manual”

ViewSonic VFD1027W-11Mi
Compliance Information
FCC Statement
This device complies with part 15 of FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy, and if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
Warning: You are cautioned that changes or modications not expressly approved by the party
responsible for compliance could void your authority to operate the equipment.
For Canada
• This Class B digital apparatus complies with Canadian ICES-003.
• Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

ViewSonic VFD1027W-11Mii
Declaration of RoHS Compliance
This product has been designed and manufactured in compliance with Directive 2002/95/EC of the
European Parliament and the Council on restriction of the use of certain hazardous substances in
electrical and electronic equipment (RoHS Directive) and is deemed to comply with the maximum
concentration values issued by the European Technical Adaptation Committee (TAC) as shown
below:
Substance Proposed Maximum
Concentration Actual Concentration
Lead (Pb) 0.1% < 0.1%
Mercury (Hg) 0.1% < 0.1%
Cadmium (Cd) 0.01% < 0.01%
Hexavalent Chromium (Cr6+)0.1% < 0.1%
Polybrominated biphenyls (PBB) 0.1% < 0.1%
Polybrominated diphenyl ethers (PBDE) 0.1% < 0.1%
Certain components of products as stated above are exempted under the Annex of the RoHS
Directives as noted below:
Examples of exempted components are:
1. Mercury in compact uorescent lamps not exceeding 5 mg per lamp and in other lamps not
specically mentioned in the Annex of RoHS Directive.
2. Lead in glass of cathode ray tubes, electronic components, uorescent tubes, and electronic
ceramic parts (e.g. piezoelectronic devices).
3. Lead in high temperature type solders (i.e. lead-based alloys containing 85% by weight or more
lead).
4. Lead as an allotting element in steel containing up to 0.35% lead by weight, aluminium containing
up to 0.4% lead by weight and as a cooper alloy containing up to 4% lead by weight.

ViewSonic VFD1027W-11Miii
Copyright Information
Copyright © ViewSonic® Corporation, 2010. All rights reserved.
ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks
of ViewSonic Corporation.
Disclaimer:ViewSonic Corporation shall not be liable for technical or editorial errors or
omissions contained herein; nor for incidental or consequential damages resulting from
furnishing this material, or the performance or use of this product.
In the interest of continuing product improvement, ViewSonic Corporation reserves the right to
change product specications without notice. Information in this document may change without
notice.
No part of this document may be copied, reproduced, or transmitted by any means, for any
purpose without prior written permission from ViewSonic Corporation.
For Your Records
Product Name:
Model Number:
Document Number:
Serial Number:
Purchase Date:
VFD1027W-11M
ViewSonic Digital Photo Frame
VS13788
VFD1027W-11M_ENG Rev. 1B 11-10-10
__________________________________
__________________________________
Product disposal at end of product life
ViewSonic respects the environment and is committed to working and living green. Thank you
for being part of Smarter, Greener Computing. Please visit ViewSonic website to learn more.
USA & Canada: http://www.viewsonic.com/company/green/recycle-program/
Europe: http://www.viewsoniceurope.com/uk/support/recycling-information/
Taiwan: http://recycle.epa.gov.tw/recycle/index2.aspx

ViewSonic VFD1027W-11Miv
Important Safety Instructions
Always follow the basic safety precautions below when using your Digital Photo Frame. This will reduce
the risk of re, electric shock, and injury.
Warning: To reduce the risk of re or shock hazard, do not expose this product to rain or moisture.
Warning: To prevent the risk, do not remove the cover, there are no spare parts inside, refer all product
services to professional personnel.
• Digital Photo frame is for indoor use only.
• Unplug Digital Photo frame before performing care and maintenance.
• Do not block the ventilation holes on the back of Digital Photo Frame at any time.
• Keep your Multimedia Digital Photo Frame out of direct sunlight and heat source.
• Protect the power cord. Route power cords appropriately to avoid trip over by someone else or
pinched by items placed on or against them. Pay particular attention to the point where the cord
attaches to Digital Photo Frame.
• Only use the AC adapter included with the Digital Photo Frame. Using any other power adapter
will void your warranty.
• Unplug the power cord from the outlet when the unit is not in use.
Cleaning LCD Screen
Treat the screen gently. The screen is made of glass which can be scratched or damaged
To clean ngerprints or dust from the LCD screen, we recommend using a soft / nonabrasive cloth
such as a camera lens cloth to clean the LCD screen.
If you use a commercial LCD cleaning kit, do not apply the cleaning liquid directly to the LCD screen.
Clean the LCD screen with cleaning cloth moistened with the liquid.
Package Content
• Digital Photo Frame
• AC power adapter (12V, 1.5A)
• This User Guide
• Quick Start Guide
• USB cable
• Remote Control
• Stand

1ViewSonic VFD1027W-11M
Table of Contents
Introduction.........................................................................................2
Main Features.....................................................................................2
Unit Assembly.....................................................................................2
Controls..............................................................................................2
Operations..........................................................................................3
Viewing Photos in Slideshow Effect....................................................3
Main Menu..........................................................................................4
Viewing Individual Pictures.................................................................4
Copy les in the le list screen............................................................5
Feature Setup......................................................................................6
Calendar And Clock Display................................................................6

2ViewSonic VFD1027W-11M
Introduction
Congratulations on your purchase of your digital photo frame.
Before operating the unit, please read this manual carefully, and retain it for future reference.
This manual will help you use the many exciting and useful features that will make your photo
frame viewing more enjoyable. It includes a step by step guide to the basics on photo frame op-
eration including instructions on uploading and playing photos.
You will also be able to create a slideshow using multiple transition
effects or display one picture at a time.
Main Features
• Display digital picture in Hi-resolution and great quality
• Create an automatic slide show with multiple transition effects.
• Supports jpeg images up to 12 Mega Pixels.
• Accepts many memory cards including SD,MMC,MS cards, as well as USB ash drives.
• Calendar mode with slideshow.
• User friendly on screen display lets you easily access all features.
• Includes a credit card sized remote control.
Unit Assembly
Open the package and remove the foam packing. Install the digital photo frame stand at the rear
of the unit. Insert the DC jack and plug the adapter into any AC outlet.
Insert the media into the correct slot and turn power to ON position.
Controls
POWER To turn ON/OFF the set.
MENU To jump to main menu.
SETUP To enter setup menu.
EXIT To escape to previous menu.
COPY/DEL To copy or delete the selected files.
ZOOM To zoom in the photo.
To rotate the photo.
ENTER To confirm the selection or show the
tool bar when play photo.
Up key. To move the icon up.
Down key. To move the icon down.
Left key. To move the icon to left.
Right key. To move the icon to right.
VIEW To view the photo in thumbnail mode.
SLIDESHOW To run slideshow mode.

3ViewSonic VFD1027W-11M
Operation
Photos can be viewed directly from your memory card or you can copy les to the device that
you want to store.
For instructions on copy les, please see the “Copy le in the le list screen” section on page 5.
Viewing Photo in Slideshow Mode
The digital picture frames is compatible with the following memory cards:
Secure Digital card (SD)
Multi Media Card (MMC)
Memory Stick (MS)
Insert the memory card with the front label facing away from you. Do not force the memory card
into the memory slot, if you are unable to insert the memory card easily, you may have inserted it
the wrong way. Reverse it and try again.
Note:
The digital picture frame will only recognize digital picture stored in jpeg format. Digital picture
stored in other formats will be ignored by the device.
Make sure you have at least one picture stored on the memory card. The frame will not function
properly without a stored picture.
You can also use a USB ash drive. It operated the same way as the memory cards. Simply
insert the ash drive into the USB host plug on the side of the frame.
The slideshow of your photos will begin to play automatically. The slideshow will play your photos
in the order which they are listed on your memory card. You can rearrange them using a PC.
To select and view an individual picture, please see “ Viewing Individual Pictures” on page 4.

4ViewSonic VFD1027W-11M
Main menu
When the digital Picture Frame is turned on, you will see the MENU screen.
There are one memory card slot and one USB port are on the board. If there is a device is in-
serted in these slot, the corresponding icon will be shown, otherwise it will be hidden.
Viewing Individual Pictures
Select the desired media on the main menu. If a media card is used, it will appear as an addi-
tional icon. Select the “ Photo” option from the menu and press “ENTER”.
A photo thumbnail list will appear. Use the UP/DOWN, LEFT/RIGHT
arrows to highlight the desired photo.
When the desired photo is highlighted, press ENTER to view it in full screen. The photo will show
up in full screen and remain still in pause mode. Press ENTER to begin slideshow mode.
While a slideshow is playing or a picture is on display, press the
ENTER button. The following display menu will appear.

5ViewSonic VFD1027W-11M
The option icons displayed are as follows:
Previous
Play the previous picture in the picture list.
Play or Pause
Play or pause the current slideshow.
Next
Play the next picture in the picture list.
Rotate
Use the rotate function to change the picture orientation to either portrait or landscape.
Stop
Stop slideshow and return to the photo thumbnail list.
Zoom
Increase the picture size by 2,4,8 or 16 times.
Copy les in the le list screen
If the user wants to do copy, press the MENU button to select FILE icon. When the sub-menu is
on, use the UP/DOWN cursor to select the le and press the RIGHT button to conrm the selec-
tion, then press the COPY/DEL button, the screen will show user COPY/ DELETE information in
the right. Use the UP/DOWN cursor to select COPY and press ENTER to conrm, then user also
use the UP/DOWN cursor to select the device and press the RIGHT to conrm that you want to
store the copy le. After copying it, it will show
“Finished”. Press the ENTER to turn off the submenu and go back to the le list.