ViewSonic PD1233T User manual

PD1233
PD1233T
Pen Display
User Guide
Model No. VS18287
P/N: PD1233 | PD1233T
IMPORTANT: Please read this User Guide to obtain important information on installing and using your product in
a safe manner, as well as registering your product for future service. Warranty information contained in this User
Guide will describe your limited coverage from ViewSonic®Corporation, which is also found on our web site at
http://www.viewsonic.com in English, or in specific languages using the Regional selection box in the upper right
corner of our website.

2
Thank you for choosing ViewSonic®
As a world-leading provider of visual solutions, ViewSonic® is dedicated to exceeding
the world’s expectations for technological evolution, innovation, and simplicity.
At ViewSonic®, we believe that our products have the potential to make a positive
impact in the world, and we are confident that the ViewSonic® product you have
chosen will serve you well.
Once again, thank you for choosing ViewSonic®!

3
Safety Precautions
Please read the following Safety Precauons before you start using the device.
• Keep this user guide in a safe place for later reference.
• Read all warnings and follow all instructions.
• Allow at least 4" (10 cm) clearance around the device to ensure proper
ventilation.
• Place the device in a well-ventilated area. Do not place anything on the device
that prevents heat dissipation.
• Do not use the device near water. To reduce the risk of fire or electric shock, do
not expose the device to moisture.
• Avoid exposing the device to direct sunlight or other sources of sustained heat.
• Do not install near any heat sources such as radiators, heat registers, stoves, or
other devices (including amplifiers) that may increase the temperature of the
device to dangerous levels.
• Use a soft, dry cloth to clean the external housing. Please see the "Maintenance"
section for more information.
• Oil may collect on the screen if you touch it. Please see the "Maintenance"
section for more information.
• Do not touch the screen surface with sharp or hard objects, as it may cause
damage to the screen. Only use the supplied pen, or fingers for models that
support touch input.
• When moving the device, be careful not to drop or bump the device on
anything.
• Do not place the device on an uneven or unstable surface. The device may fall
over resulting in an injury or a malfunction.
• Do not place any heavy objects on the device or connection cables.
• If smoke, an abnormal noise, or a strange odor is present, immediately turn the
device off and call your dealer or ViewSonic®. It is dangerous to continue using
the device.
• When connecting to a power outlet, DO NOT remove the grounding prong.
Please ensure grounding prongs are NEVER REMOVED.
• Protect the power cord from being treaded upon or pinched, particularly at the
plug, and at the point where it emerges from the equipment. Ensure that the
power outlet is located near the equipment so that it is easily accessible.
• Only use attachments/accessories specified by the manufacturer.
• Disconnect the device if it is not going to be used for a long period of time.

4
Contents
Safety Precautions....................................................... 3
Introduction ................................................................ 6
Package Contents ...................................................................................................6
Product Overview...................................................................................................7
Making Connections.................................................... 8
Installing Drivers and Software...............................................................................8
Pen Display Driver ................................................................................................... 8
Connecting the Pen Display....................................................................................9
Using the Display....................................................... 10
Using the Pen Tether............................................................................................10
Using the Touch Function (PD1233T only) ...........................................................11
Adjustable Stand Legs...........................................................................................12
Changing to Portrait Orientation........................................................................... 13
Setting the Display Area .......................................................................................14
Pen Input Area Mapping.......................................................................................15
Appendix................................................................... 17
Specifications........................................................................................................17
Display................................................................................................................... 17
Product Dimensions .............................................................................................18
Pen ........................................................................................................................ 18
Troubleshooting ...................................................................................................19
Pen ........................................................................................................................ 19
Maintenance.........................................................................................................20
General Precautions.............................................................................................. 20
Cleaning the Screen............................................................................................... 20
Cleaning the Case.................................................................................................. 20
Replacing a Pen Nib..............................................................................................21

5
Regulatory and Service Information .......................... 22
Compliance Information.......................................................................................22
FCC Compliance Statement................................................................................... 22
Industry Canada Statement................................................................................... 22
CE Conformity for European Countries ................................................................. 22
Declaration of RoHS2 Compliance......................................................................... 23
Indian Restriction of Hazardous Substances ......................................................... 24
Product Disposal at End of Product Life................................................................ 24
Copyright Information ..........................................................................................25
Customer Service .................................................................................................. 26
Limited Warranty .................................................................................................. 27
Mexico Limited Warranty...................................................................................... 30

6
Introduction
Package Contents
Download Driver / Télécharger le pilote / Descargar controlador / 椃↓䣉ⷍ᳉巇
https://www.viewsonicglobal.com/public/products_download/software/pendisplay/PenDisplayDriver.zip
PD1233
Pen Display
Quick Start Guide
Guide de démarrage rapide
Guía rápida de inicio
⺩廝‣搾ㄉ⁈

2
3
ViewSonic Pen Display Website: https://www.viewsonic.com/viewsign/products
Customer service contact information: USA- [email protected] / China- [email protected] / Global- [email protected]wsonic.com
Choose direction / Choisissez le sens / Elija la dirección / ㏷婈倱㙴僅䨄ⵥ㑷⋏
Install PenDisplayDriver
Installer PenDisplayDriver
Instalar PenDisplayDriver
⭰壄3HQ'LVSOD\樬⊼䧲⻶
ViewSonic Mini HDMI 3 in 1 cable
Câble Mini HDMI 3 en 1 ViewSonic
Cable ViewSonic Mini HDMI 3 en 1
9LHZ6RQLF0LQL+'0,⏯䷁
Power Adapter
Adaptateur secteur
Adaptador de alimentación
曢㹷ᾂㆰ♏
*Red
*Rouge
*Rojo
*䯃儰
Download Driver / Télécharger le pilote / Descargar controlador / 椃↓䣉ⷍ᳉巇
https://www.viewsonicglobal.com/public/products_download/software/pendisplay/PenDisplayDriver.zip
PD1233
Pen Display
Quick Start Guide
Guide de démarrage rapide
Guía rápida de inicio
⺩廝‣搾ㄉ⁈

2
3
ViewSonic Pen Display Website: https://www.viewsonic.com/viewsign/products
Customer service contact information: USA- [email protected] / China- [email protected] / Global- [email protected]wsonic.com
Choose direction / Choisissez le sens / Elija la dirección / ㏷婈倱㙴僅䨄ⵥ㑷⋏
Install PenDisplayDriver
Installer PenDisplayDriver
Instalar PenDisplayDriver
⭰壄3HQ'LVSOD\樬⊼䧲⻶
ViewSonic Mini HDMI 3 in 1 cable
Câble Mini HDMI 3 en 1 ViewSonic
Cable ViewSonic Mini HDMI 3 en 1
9LHZ6RQLF0LQL+'0,⏯䷁
Power Adapter
Adaptateur secteur
Adaptador de alimentación
曢㹷ᾂㆰ♏
*Red
*Rouge
*Rojo
*䯃儰
Pen Display Mini HDMI 3 in 1
cable Pen Replacement Pen nib x 3
Pen tether Nib removal tool Screwdriver AC/DC Power
Adapter 5V/2A
Download Driver / Télécharger le pilote / Descargar controlador / 椃↓䣉ⷍ᳉巇
https://www.viewsonicglobal.com/public/products_download/software/pendisplay/PenDisplayDriver.zip
PD1233
Pen Display
Quick Start Guide
Guide de démarrage rapide
Guía rápida de inicio
⺩廝‣搾ㄉ⁈

2
3
ViewSonicPen Display Website: https://www.viewsonic.com/viewsign/products
Customerservice contact information: USA- [email protected] / China- [email protected] / Global- [email protected]
Choose direction / Choisissez le sens / Elija la dirección / ㏷婈倱㙴僅䨄ⵥ㑷⋏
InstallPenDisplayDriver
InstallerPenDisplayDriver
InstalarPenDisplayDriver
⭰壄3HQ'LVSOD\樬⊼䧲⻶
ViewSonicMini HDMI 3 in 1 cable
CâbleMini HDMI 3 en 1 ViewSonic
CableViewSonic Mini HDMI 3 en 1
9LHZ6RQLF0LQL+'0,⏯䷁
PowerAdapter
Adaptateursecteur
Adaptadorde alimentación
曢㹷ᾂㆰ♏
*Red
*Rouge
*Rojo
*䯃儰
Quick Start Guide
NOTE: The contents included in your package may vary depending on your


7
Product Overview
1
1
2
3
4
5
6
7
8
8
8
9
9
9
10
7
7
1
1
2
3
4
5
6
7
8
8
8
9
9
9
10
7
7
1. Mini HDMI Port 2. Pen Tether
Anchor Point
3. Pen Holder 4.
Points
5. Display Screen/
Touch Screen¹
6. Security Lock
Slot
7. Adjustable
Stand Leg
8. Pen 9. Pen Holder

Point
10.
Leg
Touch screen only available on PD1233T.

8
Making Connecons
Installing Drivers and Soware
System Requirements:

PC I/O: USB 2.0/above
Video Input: HDMI



Pen Display Driver

pen.
1. 
2. 
NOTE: 


99
Connecng the Pen Display
1. 
Main USB A
Connector
HDMI
Secondary USB A
Connector
Top Boom
2. Connect the Mini HDMI end of the Mini HDMI 3 in 1 cable to the Mini HDMI Port
of the device.
Main USB A
Connector
HDMI
Secondary USB A
Connector
3. Connect the Main USB A cable and HDMI cable to the PC. The Secondary USB A
cable can be connected to a fully powered USB port on the computer, or to an AC
outlet using the supplied power adapter.
Main USB A
Connector
HDMI
Secondary USB A
Connector
NOTE: 

please connect the Secondary USB A cable (shown in red) to the power
adapter and plug the adapter into an AC outlet to ensure that there is
enough power for the pen display.

10
Using the Display
Using the Pen Tether
The Pen TetherPen and to the available anchor point.

11
Using the Touch Funcon (PD1233T only)



• 
removed and plugged in again, or the computer resumes from Sleep Mode.
• 
• 
the screen, do the following:
1. Open: Control Panel > Hardware and Sound > Tablet PC Sengs.
2. Select Calibraon.
3. 

1212
Adjustable Stand Legs
There are three (3) adjustable stand legs on the pen display. This allows for a


Landscape Portrait

1313
Changing to Portrait Orientaon

must be unscrewed, rotated, and screwed back into place.
pen holder is also rotated.
NOTE: 

1414
Seng the Display Area

be adjusted.

• Go to: Start > Sengs > System > Display, or
• Right Click on the Desktop and select Display sengs.

• Display orientaon is set to Landscape or Portrait (depending on your
preference), and
• Mulple displays is set to Extend these displays.

1515
Pen Input Area Mapping
To set the proper pen input area,
1. Open Pen Display Manager either by going to: Start > ViewSonic > Pen Display
Manager

the widget or by right-clicking the ViewSign Console icon in the system tray and

2. Select the Mapping tab.
3. Select the preferred Orientaon, and the correct Monitor.

16
4. Select the Pen tab to adjust Tip Feel and check the Current Pressure.
NOTE: Tip Feel alters how much actual pressure it takes to achieve maximum
pressure.
• 
levels.
• Firm - more force is needed to see changes in pen pressure.

17
Appendix
Specicaons
Display
Item Category Specicaons
LCD
Type
FHD 1920 x 1080,

0.1335 mm x 0.1335 mm pixel pitch
Surface
Treatment 
Input Signal Video Sync Separate Sync
HDMI (v. 1.4): fh:31.5-94 kHz, fv:60-75 Hz

Recommended 1920 x 1080 @60Hz
Supported
• 1920 x 1080 @60Hz
• 1680 x 1050 @ 60Hz
• 1440 x 900 @ 60Hz
• 1280 x 1024 @ 60Hz
• 1024 x 768 @ 60Hz
• 800 x 600 @ 60Hz
• 720 x 400 @ 70Hz
• 640 x 480 @ 60Hz
Touch
(for PD1233T only) Type Supported 
Power Input Voltage USB (5V/2A) or AC
Display Area Full Scan (H x V) 256.32 x 144.18 mm (10.09” x 5.68”)


Temperature 0° C to 50° C (32° F to 122° F)
Humidity 20% to 80% (non-condensing)
 Temperature -20° C to 60° C (-4° F to 140° F)
Humidity 10% to 90% (non-condensing)
Dimensions Physical
(W x H x D)
287 x 185.6 x 14.3 mm
(11.29” x 7.3” x 0.56”)
Wall Mount Dimensions 75 x 75 mm
Weight Physical 0.7 kg (1.54 lbs)
Power

On 7.26W (Typical)
Standby < 1W

1818
Product Dimensions
287 mm
185.6 mm
14.3 mm
129.95 mm
9.2 mm
Pen
Item Specicaons
Model EMP-001
Type 
Power Supply 
 5080 LPI (lines per inch)
Pressure Levels 2048
Report Rate Average 250 PPS (points per second)
Pen Tilt Angle +/- 45°
OS Supported 

19
Troubleshoong

using the monitor.
Problem or Issue Possible Soluons
No picture on the
display
• Ensure the USB cable is connected properly at both
ends.
• Ensure the HDMI cable is connected properly at
both ends.
• Ensure USB A connectors are connected directly to
the PC - not to an external hub.
• Try another USB port on the computer.
• Ensure the computer is powered on.
• Ensure all drivers are installed and updated (if
applicable).
• Make sure the secondary USB-A connector is
connected to the PC or to an AC outlet (via the

Display interference • Check if other nearby electrical devices are causing
interference.
The display is not clear
• 
• 

display unclear.
• 
skin oil.
Pen
Problem or Issue Possible Soluons
The pen is not working
• 
does not work please restart the computer.
• Reinstall the pen driver (if applicable).
The pen nib is too
short, or not making
proper contact with the
display
• 
please replace the pen nib.
The cursor is not
moving correctly
• 
• Ensure the USB cable is connected properly at both
ends.

20
Maintenance
General Precauons
• 
• Never spray or pour any liquid directly onto the screen or case.
• Handle the display with care.
Cleaning the Screen
• 

• 

screen.
Cleaning the Case
• 
• 

the surface.
Disclaimer
• ViewSonic® does not recommend the use of any ammonia or alcohol-based
cleaners on the display screen or case. Some chemical cleaners have been
reported to damage the screen and/or case of the monitor.
• 
alcohol-based cleaners.