ViewZ VZ-IBX-T Series User manual

INTERACTIVE 4K MONITOR USER MANUAL
Please read this manual thoroughly before use, and keep it handy for future reference.
75", 86" and 98" PROFESSIONAL
V Z-IBX-T SERIES

2User ManualVisit the ViewZ USA website at https://www.viewzusa.com
Safety Instrucon
Installaon
Funcon
Trouble Shoong
Mounng Guide
RMA
Specicaon
RS232 (RJ-45) Pin Map
Warranty
1. Mark Indicaon & Substance
1. Monitor Buon Control
2. OSD Control and Funcon
2. Warning & Cauon
2. Interface, Resoluon & Refresh Rate
3. FCC RF INTERFERENCE STATEMENT
1. Remote Control Funcon
3
7
12
33
30
34
32
31
36
4
8
4
9
6
11
11
CONTENTS
.......................................................................................................................................................................................
.......................................................................................................................................................................................................
..............................................................................................................................................................
..........................................................................................................................................................................................
............................................................................................................................................................................................
..................................................................................................................................................................................................................
...................................................................................................................................................................................................
..............................................................................................................................................................................
........................................................................................................................................................................................................
.......................................................................................................................................................
...................................................................................................................................................................
............................................................................................................................................................................
......................................................................................................................................
..........................................................................................................................................
..............................................................................................................................................................
..........................................................................................................................................................................................................

3User Manual Visit the ViewZ USA website at https://www.viewzusa.com
1. Read all warnings.
2. Follow all instrucons to ensure longevity of monitor.
3. Do not place the monitor near water.
4. Clean only with dry cloth.
5. Do not block any venlaon openings. Install in accordance with the manufacturer’s instrucons.
6. Do not install near any heat sources such as radiators, heat registers, stoves, or other heat generang
devices.
7. Do not override the safety purpose of the polarized or grounding-type plug.
8. A polarized plug has two blades with one wider than the other.
9. A grounding type plug has two blades and a third grounding prong.
10. The wide blade or the third prong is provided for your safety.
11. If the provided plug does not t into your outlet, consult with electrician for replacement of the outlet.
12. Protect the power cord from being walked on or pinched parcularly at plugs, convenience receptacles
and the point where it connects to the monitor.
13. Only use aachment/accessories specied by the manufacturer.
14. Use only with the cart, stand, tripod, bracket or table specied by the manufacturer or sold with the
monitor. When a cart is used, use cauon when moving the cart & monitor in combinaon to avoid
injuries.
15. Unplug the monitor during lightning storms or when unused for long periods of me.
16. Refer all servicing to qualied service personnel. Servicing is required when the monitor has been
damaged in any way.
The monitor shall not be exposed to dripping or splashing and objects containing liquids such as vases shall be
placed near the monitor.
The monitor should have ample distance (e.g. 10cm) from the wall for sucient venlaon.
Important Safety Instructions
SAFETY INSTRUCTIONS

4User ManualVisit the ViewZ USA website at https://www.viewzusa.com
This symbol is intended to alert the user to the presence of uninsulated & dangerous voltage
within the monitor’s enclosure that may be of sucient magnitude to constute a risk of
electric shock to persons.
This symbol is intended to alert the user to the presence of important operang and
maintenance (servicing) instrucons in the literature accompanying the monitor.
Important Safety Instructions
Mark Indication and Substance
Warning
SAFETY INSTRUCTIONS
CAUTION : TO REDUCE THE RISK OF ELECTRICAL SHOCK,
DO NOT REMOVE COVER (OR BACK). NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL
• Do not use damaged or loose cables and plug.
• Do not pull the plug out by the wire nor touch the plug with wet hands.
• Use only a properly grounded plug and receptacle.
• Do not connect too many extension cords or plugs to one outlet.
• Do not excessively bend the plug and wire.
• Do not disconnect the power cord while it's sll plugged into the monitor.
• Do not place any heavy objects on the power cord. Damage to the cord may cause shock or re.
• Never open the monitor. There are no user-serviceable parts inside and opening will void warranty.
• Removing covers may expose you to dangerous shock hazards or other risks.
• Keep any heang devices away from the power cable and monitor.
• Do not place the monitor near water.
• Do not insert objects of any kind into the monitor's open slots, as they may touch dangerous voltage points.
• Please follow the laws and regulaons of your municipality to dispose the monitor properly.
• Do not use the monitor in high temperature, humid, dusty or oily areas.
• Do not install the monitor where it will be exposed to connual vibraon.
• Keep the plasc packaging out of children’s reach.
• If any damage is detected upon rst opening the box, contact agency from which you bought the monitor directly.
• If your monitor does not operate normally – in parcular, if there is any unusual sound or smell coming from the
monitor – unplug it immediately and contact an authorized dealer or the service center.

5User Manual Visit the ViewZ USA website at https://www.viewzusa.com
Important Safety Instructions
Caution
Available Temperature & Humidity
Dot Defect (dead pixel) of TFT
SAFETY INSTRUCTIONS
• If the connector between the plug and the pin is dusty or dirty, clean it properly using a dry cloth.
• Make sure to unplug the power cord before cleaning the monitor.
• Make sure to leave a gap between monitor and wall.
• Do not drop the monitor when moving it.
• Place your monitor in a locaon with low humidity and minimal dust.
• Install the monitor base on a showcase or shelf so that the end of the base does not protrude from the
showcase or shelf.
• Do not place the monitor on an unstable or small surface area.
• Do not install inside a vehicle.
• Disconnect the plug from the outlet during storms or lightning or if it has not been used for a long me.
• Do not try to move the monitor by pulling on the power cord.
• Do not cover the vents on the monitor.
• When moving the monitor, turn o and unplug the power cord. Make sure that all cables, including HDMI
cable and cables connected to other devices, are disconnected before moving it.
• Place the monitor out of children’s reach as they could damage it by hanging onto it.
• Operang Temperature : 32°F ~ 104°F / 0°C ~ 40°C
• Operang Humidity : 20 ~ 80% RH
ViewZ monitors are manufactured using high-end semiconductor technology with precision rangs of 99.9%
and above. However, it may be the case that certain RGB and white pixels seem darker (or enrely unlit i.e.
black).
Modern producon methods cannot guarantee an absolute fault-free monitor. To this eect, no LED
manufacturer can guarantee a defect free panel. A few isolated pixel or sub-pixel faults are considered
tolerable and dierent policies exist that govern the amount of these tolerable values.
While most pixel faults occur in isolated regions, a cluster of dead pixels or sub-pixels can somemes form for
which a separate ruling applies. A cluster is dened as an area of 5x5 pixels. ViewZ’s policy on pixel failure:
either as an isolated fault or in the form of a cluster is outlined on the website: www.viewzusa.com

6User ManualVisit the ViewZ USA website at https://www.viewzusa.com
Note
Statement
FCC RF INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protecon against harmful interference when the
equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instrucon manual, may cause harmful interference to radio communicaons. Operaon of this equipment
in a residenal area is likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.
• Reorient or relocate the receiving antenna.
• Increase the separaon between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio, TV technician for help.
• Only shielded interface cable should be used.
Finally, any changes or modicaons to the equipment by the user not expressly approved by the grantee or
manufacturer could void the users authority to operate such equipment.
► DOC COMPLIANCE NOTICE
This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set out in the
radio interference regulaon of Canadian Department of communicaons.
• VGA and XGA are the registered trademark of IBM.
• VESA is the trademark of Video Electronics Standard Associaon.
• HDMI, HDMI logo and High-Denion Mulmedia Interface (high denion mulmedia digital interface) are the
trademark or registered trademark of HDMI Licensing LLC.
If some company or product trademark is not parcularly stated, the use of trademark has been fully recognized. Do
not alter, decompile, disassemble, decode or conduct reverse engineering to the soware installed in the product, or
it can be deemed as breach of the law.

7User Manual Visit the ViewZ USA website at https://www.viewzusa.com
USER MANUAL
The following tools may be required or recommended.
Your ViewZ monitor is shipped with all proper installaon hardware and components. If there are parts missing and/or damaged,
please stop the installaon and contact ViewZ USA at (888)-998-4399.
Assembly Components - provided
Installation Tools
TFT-LED Monitor (Qty 1)
HDMI Cable (Qty 1)
110V Power Cable (Qty 1)
USB A-B Cable (Qty 1)
Stylus Touch Pen (Qty 2)
Remote Controller (Qty 1)
User Manual (Qty 1)
Wall Mount (Qty 1)
INSTALLATION
Stud Finder & Pencil Protecve Eye-wear Level Ladder Phillips & Flathead Screwdriver Automac Screwdriver Phillips & Flathead Screwdriver Bit

8User ManualVisit the ViewZ USA website at https://www.viewzusa.com
To adjust the OSD screen:
1. Press the Seng buon to enter the MENU
2. Use the stylus pen or nger to select the desired main-MENU. The selected main-MENU is highlighted
3. Use the stylus pen or nger to select the desired sub-MENU. The selected sub-MENU is highlighted
4. Change the value you wish to adjust by using the stylus pen or nger
5. Use the stylus pen or nger to conrm the adjustment on sub-MENU
6. Use the stylus pen or nger to exit the sub-MENU and go back to the main-MENU
CONTROL AND FUNCTION
1. LED Indicator
Green color: monitor on
Red color : monitor o
2. IR Receiver
3. Power
Monitor power on / o
4. Home
Move to the home menu
On Monitor, Button Control
Monitor Button Function
5. Return
Go back to the previous stage
6. Seng
Enter the MENU, save the adjustment of sub-
menu and exit the MENU
7. Up & Down
Volume up & down
qwe rty u

9User Manual Visit the ViewZ USA website at https://www.viewzusa.com
LAN1 LAN2 RS232 YPbPr AV-IN AV-OUT
AUDIO-OUT PC-ADUIO
VGA
The following image is the descripon of interface input ports
Interface Input Ports
CONNECT EXTERNAL EQUIPMENTS
1. RJ-45 IN 1 & 2
2. RS232
3. Y Pb Pr IN
4. AV IN / OUT
5. AUDIO OUT
6. PC-AUDIO IN
7. VGA IN
Interface Resolution & Refresh Rate
HDMI (2.0)
DP
VGA
Interface Input Source Max Resoluon
3840 x 2160
3840 x 2160
1920 x 1080
Refresh Rate
60Hz
60Hz
60Hz
8. HDMI IN 1 & 2
9. DP IN
10. USB IN (2.0) x 2
11. USB IN (Touch)
12. SPDIF
13. HDMI OUT
14. USB IN x 2
15. USB IN (Touch)
16. HDMI IN
17. POWER ON/OFF
18. AC 100-240V IN
w eq r t y u i ao s d f
g h j k l

10 User ManualVisit the ViewZ USA website at https://www.viewzusa.com
Features
FEATURES
• Supports 4K (3840X2160) Resolution
• Wide Viewing Angle (IPS Panel)
• Supports HDMI (2.0 & 1.4), YPbPr, AV, VGA
• Supports Touch Screen - 2Sensor Type (Infrared Touch Frame), Surface Protection (4mm Toughened Glass),
Response Time (< 15ms), Output Mode (HID Standard ), Touch Accuracy (90% ± 2mm), Theory Clicks
(Unlimited), Minimum Touch Object (≥ 6 mm)
• USB - Media Player
Video Codec - MPEG1/2, MPEG4, DivX 3.11/4.12/5.x/5, XviD, H.263, H.264, MVC, AVS, WMV3, VC1,
Motion JPEG, VP8/9, RV30/40
Video Format - MPEG, AVI, MOV, MP4, MKV, RM, 3GP, FLV, WebM, ASP), Image Format (JPEG, PNG, BMP),
Music Format - mp3, mp4, wma
• Digital & Analog Inputs
• HDMI & AV Loop-through
• Universal Wall Mounting & Auto Source Recovery
• Wall Mount / OPS Moudle is option.
Description
• Before operang the interacve 4K monitor, please make sure you fully understand relevant prerequisites such
as the specicaon or limitaon of H/W and S/W. ViewZ shall not be responsible for loss, damage or injury
caused by improper use of products.
• You are not allowed to copy, use, alter or disseminate this manual / soware / built-in media player soware in
whole or in part without prior wrien consent.
• Any and all product names, model names, labels, or company names used in this manual are the trademarks
and registered trademarks of ViewZ.
• If you have any advice or queson related to this manual, please contact our dealer, re-seller or our customer
service representaves.

11User Manual Visit the ViewZ USA website at https://www.viewzusa.com
Remote Controller
REMOTE FUNCTION
q w
e
t
r
i
s
o
y
a
u
1. POWER ON /OFF
2. SOURCE - Change the input source
3. ARROW - Menu control
4. OK - To conrm/launch current menu value
5. MENU - Enter the menu
6. HOME - Display the launcher home page
7. BACK - Retrun the previous interface/page
8. OPS- To select the OPS input source (if OPS installed)
9. WRITER - Launching the wring app
10. SCREENSHOT - Capture a screenshot of current page
11. - VOLUME - To decrease the volume
12. MUTE - Turn O the Sound (Audio Out)
13. + VOLUME - To increase the volume
Display image, sound and custom sengs can be adjusted in menu by remote controller. To adjust monitor seng value:
1. Press the 'MENU' buon to enter the menu.
2. Press the 'SOURCE' buon, then press the ◄ / ► buons to select input source.
Press the 'OK' buon to select a desired input source.
3. Press the ▲ / ▼ / ◄ / ► buons to select the desired sub-menu and change the value you wish to adjust.
4. Press the 'OK' buon to conrm / the 'MENU/BACK' buon to exit for saving adjustment value on sub-menu.
5. Press the 'MUTE' buon to on / o audio-out of monitor.
d
f

12 User ManualVisit the ViewZ USA website at https://www.viewzusa.com
Setup
Source
Quick Menu
Current Screen Whiteboard
Back
Home
Mul Window
Whiteboard
Apps
File Manager
Change the setting of monitor system
Select the input source & setup
Launch the default program
Open the whiteboard based on current scene
Go back to the previous window / step
Go back to the default page
Show the running apps
Open the whiteboard app
Show the installed app
Open the current file/folder browser
Network, Date, Language, System,
Lock, Power, Info
Screenshots, Spotlight, Calculator,
Countdown, Lock, Vote, Clean
VGA, AV, YPbPr, OPS, DP, HDMI 1-3
FUNCTION VALUE
▲/▼ MOVE ◄/►ADJUST
OK SELECT MENU RETURN
Touch SELECT
CONTROL AND FUNCTION
Home
System Setup
Source
Quick Menu
Mul window
Back to Home
Back
Current Screen
Whiteboard
Whiteboard
Apps
File Manager

13User Manual Visit the ViewZ USA website at https://www.viewzusa.com
CONTROL AND FUNCTION
Home - Whiteboard
Background Seng
Thin Pen Seng
Lasso Move
Nib Seng
More Features
Import Picture
Scky Note
Spot Light
Split Screen
Previous Step
Single / Mul Touch
Previous Page
Next Step
Save
Next Page
One Key Clear
Hide
New Page
Share Menu
Change the background color / image
Select the brush size / color / thickness
Polygonal movement of selected object
Change the touch drawing as sharpy style
Import pictures into whiteboard
Create a sticky note
Create a spot light on whiteboard
Split the current whiteboard
Moves one step back in the undo chain
Select touch method
Show the Previous saved whiteboard
Moves one step forward in the redo chain
Save the current whiteboard
Show the next saved whiteboard
Clear all content on whiteboard
Hide the menu icons
Create a new whiteboard
Share current whiteboard or quit without save
Color, Preset-Image, Custom Background
Color, Thin/Thick
Yellow, Red, Green, Blue
Two, Three
Single, Multi
Email, QRCode, Quit
FUNCTION VALUE

14 User ManualVisit the ViewZ USA website at https://www.viewzusa.com
CONTROL AND FUNCTION
Home - Apps & File Manager
When you select the 'Apps', the above window will popup on screen. You can run one of Apps
When you select the 'File Manager', the above window will popup on screen. You can run or edit one of les.

15User Manual Visit the ViewZ USA website at https://www.viewzusa.com
CONTROL AND FUNCTION
Home - Side Quick Menu
Screenshot
Spotlight
Calculator
Countdown
Lock
Vote
Clean System
Take a screenshot
Create a spot light on current screen
Launch the calculating program
Launch the countdown program
Lock the monitor
Launch a voting program
Optimize the system resources
FUNCTION VALUE

16 User ManualVisit the ViewZ USA website at https://www.viewzusa.com
CONTROL AND FUNCTION
Home - Quick Menu
When you hold touch by 2 ngers, the 'Quick Menu' will popup and you can select the desired menu to edit or run.
Current App Whiteboard
Mul Window
System Setup
Back to Home
More
Back
Sound
Brightness
Lock
Screenshot
Clean System
Source
Source
Screenshot
Lock
Sound
Brightness
Mul Window
Clean System
Current Screen Whiteboard
Back
Home
More Features
System Setup
Select the input source & setup
Take a screenshot
Lock the monitor
Control the volume
Control the brightness of monitor
Show the running apps
Optimize the system resources
Open the whiteboard based on current scene
Go back to the previous window / step
Go back to the default page
Change the setting of monitor system Network, Date, Language, System,
Lock, Power, Info
Initial Password : 888888
0 ~ 100
0 ~ 100
Countdown, Lock, Vote, Clean
VGA, AV, YPbPr, OPS, DP, HDMI 1-3
FUNCTION VALUE

17User Manual Visit the ViewZ USA website at https://www.viewzusa.com
When you run 'Current Screen Whiteboard', the above icons will popup and can make a note.
CONTROL AND FUNCTION
Current Screen Whiteboard
Stroker Size, Color
Quit
Whiteboard
Previous Step
Next Step
More Features
Save
Import Picture
Highlight
All Clear
Paintbrush Setup
Cursor
Quit the current whiteboard
Open the whiteboard app
Moves one step back in the undo chain
Moves one step forward in the redo chain
Save the current screen whtieboard
Import the picture on current screen
Make a highlight on current screen
Clear all contents on current whiteboard
Change the color & stroke size
Change the touch input as mouse input
FUNCTION VALUE
Quit
Paintbrush
Previous Step
Next Step Cursor
Whiteboard
Save Highlight
Import Picture
All Clear

18 User ManualVisit the ViewZ USA website at https://www.viewzusa.com
CONTROL AND FUNCTION
Select Input Source / Source Setup
All Source
Automac Source Jump
Source Priority
Source Lock
Boot Source
No Signal Automac
Shutdown
Select an input source
Set the automatic source switching
Set the priority of input source
* To access this function 'Automatic Source
Jump' should be 'ON'
Lock the selected input source
Choose the initial input source
Set the shutdown time under no signal
VGA, AV, YPbPr, OPS, DP,
HDMI, HDMI1, HDMI2
OPS, DP, HDMI, HDMI1, HDMI2
HDMI, HDMI1, HDMI2
ON /OFF
OPS, DP, HDMI, HDMI1, HDMI2
Set these as 1(High) to 5(Low)
VGA, AV, YPbPr, OPS, DP,
Last Source, Android, VGA, AV, YPbPr,
0, 5, 15, 30 min
FUNCTION VALUE

19User Manual Visit the ViewZ USA website at https://www.viewzusa.com
CONTROL AND FUNCTION
Display (Image)
Adjust the brightness
Adjust the difference between the lightest and darkest parts of the image
Adjust the difference between the lightest and darkest parts of the image
Adjust projected image sharpness
Adjust the color value
USER
Contrast
Brightness
Tone
Aquity
Saturaon
Standard
Lightness
Warm
Zoom Mode
Cold
SOFT
PC
Eye Pro
STANDARD
Applies user selected values
Give the white color a neutral tint
Reduce contrast and sharpness
Give the white color a reddish tint
Adjust the aspect ratio
Give the white color a blue-ish tint
Provide enhanced contrast and sharpness
Provide enhanced contrast and sharpness
Provide enhanced contrast and sharpness
Provide standard contrast and sharpness
0 ~100
0 ~100
0 ~100
0 ~100
0 ~100
16:9, 4:3
IMAGE MODE
COLOR TEMPERATURE
ZOOM MODE
VALUE
VALUE
VALUE

20 User ManualVisit the ViewZ USA website at https://www.viewzusa.com
CONTROL AND FUNCTION
Sound (Voice)
VOLUME
VOICE OUTPUT
SOUND QUALIZATION
Adjust the volume level
Built-in Device - use sound source from internal device
External Device - use sound source from external device
Adjust the balance
0 ~100
ON / OFF
ON / OFF
0 ~100
BASS
TREBLE
Adjust the bass level
Adjust the treble level
0 ~100
0 ~100
FUNCTION VALUE