Vifa STOCKHOLM 2.0 User manual

STOCKHOLM 2.0
mounting wall bracket
ENGLISH

1. IN THE BAGS
• 1 x Wall bracket with built-in spirit level
(In the Stockholm main box)
• 4 x Wall plugs for concrete/ brick wall
• 4 x Screws
• 2 x Screws for mounting speaker
• 2 x Covers for screws
• 1 x Allen key
x1 x4 x4 x2 x2 x1
IMPORTANT INFORMATION
It is important when installing wall mount that the installation follow local safety codes, and safe installation
practices. In the event there is question to safe installation Vifa strongly suggests to seek the assistance of a
professional installer. Vifa does not take responsibility for improper installation of the wall mount.
WARNING NOTICE
Use the correct size and type of screws and wall anchors – taking into account the construction and
condition of the wall. Use screws and and wall plugs each with a minimum load rating of 35 kg. This
procedure is not intended for use on Dry wall installations. If you intend to hang the product on a drywall,
the wall bracket must be fastened to two vertical studs.

2. MARK THE HOLES
• Place the wall bracket in the desired position and mark
the holes with a pencil on the wall.
• Use the spirit leveller to make sure the wall bracket is
positioned horizontally.
3. DRILL HOLES AND INSERT PLUGS
• Drill the four holes with an appropriate 10 mm drill.
• Insert the wall plugs.
4. POSITION AND SCREW
• Place the wall bracket and insert the screws with
a screwdriver.
• Make sure the wall bracket is positioned horizontaly,
using the built-in spirit level on the wall bracket.
• Tighten the screws.

5. CABLE FOR STOCKHOLM
• Place the power cable and other cables in
the wall bracket.
6. MOUNT STOCKHOLM
• Lift and place the STOCKHOLM, plug in the
cables and mount screws in the bottom
- we recommend two people for this step.
• Fasten the screws - using the Allen key.
• Put on the screw covers.

For more information please visit our website at
vifa.dk
2017 10 REV.2.0