Place the installation CD in the CD drive and the
installation should start automatically.
If the installation doesn’t start automatically, go
to Start > Run…
Enter “D:\MLsetup.exe” and press “Enter”
(assuming “D” is the letter of your CD drive).
Follow the instructions on the screen to complete
the installation.
From your desktop, double click on the following icon
to launch the application.
The application window initially shows “No Device
Detected”.
Insert the SIM card into the SIM card slot of your USB
modem and connect the USB modem to your
computer using the provided USB cable.
After your computer has successfully detected the
USB modem, the application window will show
“Ready” as shown in the figure below.
You may be prompted to enter the PIN code if the
PIN code request is activated on your SIM card.
To create a 3G connection profile, click on
and select “Profile Manager” from the pop-up
menu.
From the “Profile Manager” window, click on
button “New” to start the “Profile Wizard”.
Follow the instructions in the “Profile Wizard”
to create the profile. You may also need the
following information from your service
provider: APN, PDP Type, Username and
Password.
