Viking PP-250 User manual

QUICK START GUIDE
VIKING Electronics, Inc.
KSee Product Manual for complete installation and programming instructions.
1.0 Out-of-Box
1.1 Verify that you have received all of the parts listed
1.2 Download the product manual
1. Go to www.vikingelectronics.com and
enter PP-250 in the search box
2. Under Documents click Product Manual
to open and download the PDF
Scan the QR code to
open and download
the product manual
- OR -
PP-250
250 Watt / 70V
Paging Power Amplifier
january 22, 2021
X 1 Terminal Strip 4 Pin
Right Angle Removable
X 1 Terminal Strip 3 Pin
Right Angle Removable
X 1 Bit slotted 2.5 mm
X 1 PP-250
X 1 Y Power Cord
INPUT LEVEL: Input Level control and LED to show activity and audio level
BASS: Low frequency tone control
TREBLE:High frequency tone control
VOLUME: Volume control and LED level indicator for setting Peak Limiting
POWER:LED indicating power is on (winks off to indicate an overload condition)
250 Watt Paging Power Amplifier INPUTLEVELBASSVOLUMETREBLEPOWER VIKING MODEL PP-250
2.0 Features Overview
Use included slotted bit to adjust tamper resistant front panel pots.

3.0 Connections
Due to the dynamic nature of the product design, the information contained in this document is subject to change without notice. Viking Electronics, and its affiliates and/or subsidiaries
assume no responsibility for errors and omissions contained in this information. Revisions of this document or new editions of it may be issued to incorporate such changes.
See the Product Manual for complete installation and programming instructions.
Questions? Call Viking Product Support: 715-386-8666
PP-250 Quick Start Guide ZF304301 REV A
+ SPEAKERS+
25V
70V
25V
4 5 6 7 +
MODEL PP-250VIKING
250 WATT PAGING POWER AMPLIFIER LINE INPUT1 2 3 AC POWER INPUT(BOTH REQUIRED)AC POWER INPUT:
Connect to 100V to 240V AC power using the included “Y” power cordLINE INPUTAnalog line level input SHIELDAnalog groundSPEAKERS: Connect up to two hundred fifty (250) 70V or 25V speakers and/or paging horns