Viking Designer DFBB536 User manual

Viking Range Corporation
111 Front Street
Greenwood, Mississippi 38930 USA
[phone]
For product information,
call 1-888-VIKING1 (845-4641)
or visit the Viking Web site at
vikingrange.com
F20634A EN (022309J)
Viking Installation Guide
Custom FrontModels
All Refrigerator/Freezer/
Side-by-Side/Bottom-Mount
UL
C
UL

3
2
Table of Contents
Warnings & Important Information ____________________________________________________________________3
Bottom-Mount
Dimensions and Specifications (36”) __________________________________________________________4
Cutout Dimensions (36”) ____________________________________________________________________6
Anti-Tip Dimensions (36”) ___________________________________________________________________7
Overlay Dimensions (36”) ___________________________________________________________________8
Custom Grille Dimensions (36”) ______________________________________________________________9
Side-By-Side
Dimensions (42”) _________________________________________________________________________11
Dimensions (48”) ________________________________________________________________________12
Specifications (42” and 48”) ________________________________________________________________13
Cutout Dimensions (42”) __________________________________________________________________14
Anti-Tip Dimensions (42”) _________________________________________________________________15
Cutout Dimensions (48”) ___________________________________________________________________16
Anti-Tip Dimensions (48”) __________________________________________________________________17
Overlay Dimensions (42”) __________________________________________________________________18
Overlay Dimensions (48”) __________________________________________________________________19
Custom Grille Dimensions (42”) ____________________________________________________________20
Custom Grille Dimensions (48”) ____________________________________________________________21
All Refrigerator/Freezer
Dimensions & Specifications (30” and 36”) ___________________________________________________22
Cutout Dimensions (30”) ___________________________________________________________________24
Anti-Tip Dimensions (30”) __________________________________________________________________25
Cutout Dimensions (36”) ___________________________________________________________________26
Anti-Tip Dimensions (36”) __________________________________________________________________27
Dimensions (Dual 30”) _____________________________________________________________________28
Dimensions (Dual 30” and 36”) _____________________________________________________________29
Dimensions (Dual 36”) _____________________________________________________________________30
Specifications (Dual) _______________________________________________________________________31
Cutout Dimensions (Dual 30”) ______________________________________________________________32
Anti-Tip Dimensions (Dual 30”) _____________________________________________________________33
Cutout Dimensions (Dual 30” and 36”) ______________________________________________________34
Anti-Tip Dimensions (Dual 30” and 36”) _____________________________________________________35
Cutout Dimensions (Dual 36”) ______________________________________________________________36
Anti-Tip Dimensions (Dual 36”) _____________________________________________________________37
Overlay Dimensions (30” & 36”) ____________________________________________________________38
Custom Grille Dimensions (30”)_____________________________________________________________39
Custom Grille Dimensions (36”)_____________________________________________________________40
Custom Grille Dimensions (Dual 30”) ________________________________________________________41
Custom Grille Dimensions (Dual 30” and 36”) ________________________________________________42
Custom Grille Dimensions (Dual 36”) ________________________________________________________43
Cabinet Information _______________________________________________________________________________44
Custom Side Panel Dimensions _____________________________________________________________________46
Custom Panel General Information __________________________________________________________________47
Ice and Water Dispenser Bezel Removal______________________________________________________________47
Custom Door Panel Installation – (Refrigerator or Freezer) ______________________________________________49
Ica and Water Dispenser Bezel Installation ____________________________________________________________52
Custom Panel Hinge Cutout ________________________________________________________________________54
Custom Grille Installation ___________________________________________________________________________54
General Information _______________________________________________________________________________56
Unpacking & Moving ______________________________________________________________________58
Installation ________________________________________________________________________________________59
Hinge Adjustment_________________________________________________________________________60
Kickplate Installation_______________________________________________________________________62
Door Stop Adjustment_____________________________________________________________________63
Water Filter Installation ____________________________________________________________________64
Water Filter System Specifications___________________________________________________________65
Final Installation __________________________________________________________________________66
Performance Checklist _____________________________________________________________________________67
Control Panels ____________________________________________________________________________________68
Service & Registration______________________________________________________________________________70
IMPORTANT – Please Read and Follow
• Make sure that incoming voltage is the same as
unit rating. An electric rating plate specifying
voltage, frequency, wattage, amperage, and
phase is attached to the product.
• To reduce the risk of fire, electrical shock, or injury
to persons, installation work and electrical wiring
must be done by a qualified technician in
accordance with all applicable codes and
standards, including fire-rated construction.
• The installer should leave these instructions with
the consumer who should retain them for local
inspector’s use and for future reference.
It is your responsibility to:
• Comply with installation specifications and
dimensions.
• Properly install unit.
• Remove any moldings or decorative panels that
prevent the unit from being serviced.
• Make sure that you have these materials (not
provided with your unit), which are necessary for
proper installation
• 1/4” (6 mm) copper tubing with shutoff valve
• 6 – #8 x 3” (7.6 cm) wood screws (longer
screws may be required)
• 1– Saddle valve (DO NOT use self-piercing
feature of the valve)
• Assure that floor will support unit, door panels
and contents (approximately 1200 pounds
[540 kg]).
• Provide a properly grounded electrical outlet.
• Assure that location will permit appliance doors
to open a minimum of 90˚.
WARNING
TIP OVER HAZARD
Appliance is top heavy
and tips easily when not
co pletely installed. Keep
doors closed until appliance
is co pletely installed and secured per
installation instructions.
Use two or ore people to ove and
install appliance. Failure to do so can
result in death or serious injury.
ELECTRICAL SHOCK
HAZARD
Disconnect power or turn
power disconnect switch to
OFF position before re oving top grille.
Failure to do so can result in death or
electric shock.
Most of the unit’s weight is at the top. Extra care is needed when oving the unit to prevent
tipping. Use cardboard shipping aterial or plywood under unit until it is installed in the
operating position to protect floor surface.
WARNING
Your safety and the safety of others is
very i portant.
We have provided any i portant safety
essages in this anual and on your
appliance. ALWAYS read and obey all
safety essages.
This is the safety alert sy bol. This
sy bol alerts you to hazards that
can kill or hurt you and others.
All safety essages will be preceded
by the safety alert sy bol and the word
“DANGER” or “WARNING.”
These words ean:
Hazards or unsafe practices
which WILL result in severe personal
injury or death
DANGER
Hazards or unsafe practices
which COULD result in severe personal
injury or death
All safety essages will identify the
hazard, tell you how to reduce the chance
of injury, and tell you what can happen if
the instructions are not followed.
WARNING

Specifications (Bottom-Mount)
51-7/8”
(131.8 cm)
23-1/16”
(58.6 cm)
3-1/2”
(8.9 cm)
82-7/8”
(210.5cm)
min.
to
84-1/16”
(213.5cm)
max.
Measurement varies
(locallysupplied hardware)
23-13/16”
(60.5cm)
24-3/4”
(62.9 cm)
35”
(98.9cm)
36”
(91.4 cm)
Dimensions (Bottom-Mount)
5
4
3 ” Bottom-Mount
Description DFBB53
Overall width 36” (91.5 cm)
Overall height (from bottom) 82-3/4” (210.2 cm) min. to 84-1/16” (213.5 cm) max.
Overall depth (from rear) To front edge of side trim 23-13/16” (60.5 cm)
To front of top grille 24-3/4” (62.9 cm)
To front edge of door trim 24” (61.0 cm)
Cutout width 36” (91.5 cm)
Cutout height 82-7/8” (210.5 cm) min. to 84-1/16” (213.5 cm) max.
Cutout depth 24” (61.0 cm) min.*
Electrical requirements 115 volt, 60 Hz, 15 amp dedicated circuit; 3-wire cord with
grounded 3-prong plug attached to product
Maximum amp usage 9.9 amps
Inlet water requirements 1/4” copper tubing inlet waterline; minimum 20 psi;
maximum 120 psi
Overall interior dimensions
Refrigerator 15.2 cu. ft. (431 liters)
Freezer 5.1 cu. ft. (145 liters)
Total capacity 20.3 cu. ft. (576 liters)
Maximum panel weight Fresh food 45 lbs. (20.4 kg) Freezer 20 lbs. (9.0 kg)
Approximate shipping weight 500 lbs. (227.3 kg)
*Note: Full overlay models fit flush in 25” (63.5 cm) deep cabinet openings. They can be installed in standard
24” (61.0 cm) deep openings. The door faces and top grille will protrude 3/4” (1.9 cm) into the room.
36” Bottom-Mount

7
6
9”
(22.9 cm)
73-3/8”
(186.4cm)
82-7/8”
(210.5cm)min.
anti-tipboard&
openingheight
84-1/16”
(213.5cm)max.
anti-tipboard&
openingheight
36”
(91.5cm)
24”
(61.0cm)
Electric Outlet Location
Water Line Entry Area
36”
(91.5cm)
6-3/4”
(17.1cm)
7-5/8”
(19.4cm)
3”
(7.6cm)
5/8”
(1.5cm)
5/8”
(1.5cm)
10-1/2”
(26.7cm)
5/8”
(1.5cm)
10-3/4”
(27.3cm)
1”
(2.5cm)
3-5/8”
(9.2cm)
Optionalfloor
waterlineentry
Seeanti-tipboardinstallation
6”
(15.2cm)
9”
(22.9cm)
Cutout Dimensions (Bottom-Mount)
36” Bottom-Mount
One 2”x 4” mounting board
1-1/2” (3.8 cm) x 3-1/2” (8.9 cm)
Note: If unit is installed deeper than 24” (61.0 cm),
then shim behind the mounting board by the difference.
Note: Top of unit must be placed firmly under anti-tip board.
Bottom of anti-tip board is 3-7/8” (9.8 cm) below opening height.
Anti-Tip Location
79-3/8”
(201.6cm)min.
tobottomof
anti-tipboard
80-1/2”
(204.6cm)max.
tobottomof
anti-tipboard
29”
(73.7cm)
3-1/2”
(8.9cm)
1-1/2”
(3.8cm)
Anti-Tip Dimensions (Bottom-Mount)
36” Bottom-Mount
One 2”x4” mounting board 1-1/2” (3.8 cm) x 3-1/2” (8.9 cm)
Note: If unit is installed deeper than 24” (61.0 cm), then
shim behind the mounting board by the difference.
Bottom of anti-tip board is 3-7/8” (9.8 cm) below the opening height.
Note: Top of unit must be placed firmly under anti-tip board.

Reverse dimensions
for other end.
1/2”
(1.27cm)
1-1/2”
(3.81cm)
1/4”Radius
(.64cm)
2-3/4”
(6.98cm)
1/2”
(1.27cm)
3/4”
(1.90cm)
1/2”
(1.27cm)
1/8”
(.31cm)
1/2”
(1.27cm)
1/4”Radius
1/4” Radius
(1.2cm) (1.2 cm)
1/4”Radius
(.64cm)
7/8”
(2.22cm)
1/2”
(1.27cm)
34”
(86.36cm)
34”
(86.36cm)
3/4”
(1.90cm)
1/2”
(1.27cm)
3/4”
(1.90cm)
3-3/4”
(9.52cm)
3-3/4”
(9.52cm)
3-5/8”
(9.20cm)
33-15/16”
(86.20cm)
3”
(7.62cm)
3”
(7.62cm)
3/4”
(1.90cm)
35-1/2”
(90.17cm)
1/2”
(1.27cm)
3-1/8”
(7.93cm)
Optionalhingecover
32-3/16”
(81.75cm)
5-17/32”
(14.10cm)
4-11/64”
(10.59cm)
30-27/32”
(78.34cm)
3-25/32”
(9.60cm)
27/32”
(.84cm)
9/16”
(1.42cm)
1/4”
(.635cm)
16.5˚
20.0˚
2-1/8”
(5.4cm)
Custom Grille Dimensions (Bottom-Mount)
35-1/4”
(89.5cm)
23-1/16”
(58.6cm)
3/4”
(1.9cm)
35-1/4”
(89.5cm)
32-1/4”tonotch
(81.9cm)
5/8”
(1.6cm)
51-7/8”
(131.8cm)
51-1/4”
(130.2cm)
3/4”
(1.9cm)
Note: Cornernotchisforleft
hingedoor.Reverseforrighthinge.
Seepage54forcutoutinstructions.
1-13/16”
(4.60 cm)
5/8”
5/8”
(1.6cm)(1.6 cm)
3”
(7.62 cm)
3/32”
(.24cm)
5/8”
5/8”
(1.6cm)
Note: Inset shown
upside down.
Overlay Dimensions (Bottom-Mount)
9
8
36” Custom Panels 36” Custom Grille
Note: Panel overlays must be dry, solid, straight
one-piece panels. The use of multiple panel
pieces to achieve the dimensions is not
recommended.

Dimensions (Side-By-Side)
325/32”
(9.60cm)
27/32”
(.84cm)
9/16”
(1.42cm)
1/4”
(.635cm)
16.5˚
20.0˚
Note: This part should be
located at the center of the
grille. If desired, two per grille
can be used by dividing the
length of the grille into thirds.
1/2”
(1.27cm)
1-1/2”
(3.81cm)
1/4”Radius
(.64cm)
2-3/4”
(6.98cm)
1/2”
(1.27cm)
3/4”
(1.90cm)
3/8”
(0.38 cm)
1/2”
(1.27 cm)
R 3/32”
(0.09 cm)
3/4”
(1.90 cm)
3/4”
(1.90 cm)
3/4”
(1.90 cm)
13/32”
(1.03 cm)
9/16”
(1.43 cm)
1/8”
(.32 cm)
Grille support
2-7/8”
(7.30cm)
1”
(2.54cm)
1/2”
(1.27cm)
1/8”
(.31cm)
1/2”
(1.27cm)
1/4”Radius1/4” Radius
(1.2cm)
(1.2 cm)
1/4”Radius
(.64cm)
Reverse dimensions
for other end.
7/8”
(2.22cm)
1/2”
(1.27cm)
1/2”
(1.27cm)
3-1/8”
(7.93cm)
Optionalhingecover
1/2”
(1.27cm)
3-5/8”
(9.20cm)
3/4”
(1.90cm)
3/4”
(1.90cm)
3-3/4”
(9.52cm)
3-3/4”
(9.52cm)
3”
(7.62cm)
3”
(7.62cm)
3/4”
(1.90cm)
71-1/2”
(181.61cm)
70”
(177.80cm
69-15/16”
(177.64cm)
70”
(177.80cm)
68-3/64”
(172.83cm)
66-27/32”
(169.78cm)
4-11/64”
(11.27cm)
5-17/32”
(14.04cm)
30-27/32”
(78.34cm)
32-3/16”
(81.75cm)
40-11/64”
(102.03cm)
41-25/64”
(10 5.13cm)
Custom Grille Dimensions (Bottom-Mount)
11
10
Dual 36” Custom Grille
42” Side-By-Side
75-15/16”
(192.9cm)
3-1/2”
(8.9cm)
82-7/8”
(210.5cm)
min.
to
84-1/16”
(213.5cm)
max.
Measurementvaries
(locallysuppliedhardware)
23-13/16”
(60.5 cm)
24-3/4”
(62.9 cm)
41”
(104.1cm)
42”
(106.7cm)

Specifications (Side-By-Side)
75-15/16”
(192.9 cm)
3-1/2”
(8.9 cm)
82-7/8”
(210.5 cm)
min.
to
84-1/16”
(213.5 cm)
max.
23-13/16”
(60.5 cm)
24-3/4”
(62.9 cm)
47”
(119.4cm)
48”
(121.9cm)
Measurement varies
(locallysuppliedhardware)
Dimensions (Side-By-Side)
13
12
42” Side-By-Side
Description DFSB542 DFSB542D
Overall width 42” (106.7 cm)
Overall height (from bottom) 82-3/4” (210.2 cm) min. to 84-1/16” (213.5 cm) max.
Overall depth (from rear) To front edge of side trim 23-13/16” (60.5 cm)
To front of top grille 24-3/4” (62.9 cm)
To front edge of door trim 24” (61.0 cm)*
Cutout width 42” (106.7 cm)
Cutout height 82-7/8” (210.5 cm) min. to 84-1/16” (213.5 cm) max.
Cutout depth 24” (61.0 cm) min.*
Electrical requirements 115 volt, 60 Hz, 15 amp dedicated circuit; 3-wire cord with
grounded 3-prong plug attached to product
Maximum amp usage 9.9 amps
Inlet water requirements 1/4” copper tubing inlet waterline; 1/4” copper tubing inlet waterline;
minimum 20 psi; maximum 120 psi minimum 35 psi; maximum 120 psi
Overall interior dimensions
Refrigerator 15.0 cu. ft. (425 liters) 14.5 cu. ft. (411 liters)
Freezer 9.0 cu. ft. (255 liters) 8.6 cu. ft. (244 liters)
Total capacity 24.0 cu. ft. (680 liters) 23.1 cu. ft. (654 liters)
Maximum panel weight Fresh food 40 lbs. (18.1 kg) Freezer 35 lbs. (15.9 kg)
Approximate shipping weight 525 lbs. (236.2 kg)
48” Side-By-Side
Description DFSB548 DFSB548D
Overall width 48” (121.9 cm)
Overall height (from bottom) 82-3/4” (210.2 cm) min. to 84-1/16” (213.5 cm) max.
Overall depth (from rear) To front edge of side trim 23-13/16” (60.5 cm)
To front of top grille 24-3/4” (62.9 cm)
To front edge of door trim 24” (61.0 cm)*
Cutout width 48” (121.9 cm)
Cutout height 82-7/8” (210.5 cm) min. to. 84-1/16” (213.5 cm) max
Cutout depth 24” (61.0 cm) min.*
Electrical requirements 115 volt, 60 Hz, 15 amp dedicated circuit; 3-wire cord with
grounded 3-prong plug attached to product
Maximum amp usage 9.9 amps
Inlet water requirements 1/4” copper tubing inlet waterline; 1/4” copper tubing inlet waterline;
minimum 20 psi; maximum 120 psi minimum 35 psi; maximum 120 psi
Overall interior dimensions
Refrigerator 18.5 cu. ft. (524 liters) 17.9 cu. ft. (507 liters)
Freezer 8.9 cu. ft. (252 liters) 8.5 cu. ft. (241 liters)
Total capacity 27.4 cu. ft. (776 liters) 26.4 cu. ft. (748 liters)
Maximum panel weight Fresh food 50 lbs. (22.7 kg) Freezer 35 lbs. (15.9 kg)
Approximate shipping weight 650 lbs. (292.5 kg)
*Note: Full overlay models fit flush in 25” (63.5 cm) deep cabinet openings. They can be installed in standard
24” (61.0 cm) deep openings. The door faces and top grille will protrude 3/4” (1.9 cm) into the room.
48” Side-By-Side

15
14
One 2”x 4” mounting board
1-1/2” (3.8 cm) x 3-1/2” (8.9 cm)
Note: If unit is installed deeper than 24” (61.0 cm), then shim
behind the mounting board by the difference.
Bottom of anti-tip board is 3-7/8” (9.8 cm) below opening height.
Note: Top of unit must be placed firmly under anti-tip board.
Anti-Tip Location
79-3/8”
(201.6cm)min.
tobottomof
anti-tipboard
80-1/2”
(204.6cm)max.
tobottomof
anti-tipboard
35”
(88.9cm)
3-1/2”
(8.9cm)
1-1/2”
(3.8cm)
Anti-Tip Dimensions (Side-By-Side)
9”
(22.9 cm)
73-3/8”
(186.4cm)
82-7/8”
(210.5cm)min.
anti-tipboard&
openingheight
84-1/16”
(213.5cm)max.
anti-tipboard&
openingheight
42”
(106.7cm)
24”
(61.0cm)
Electric Outlet Location
Water Line Entry Area
42”
(106.7cm)
6-3/4”
(17.1cm)
7-5/8”
(19.4cm)
3”
(7.6cm)
5/8”
(1.5cm)
5/8”
(1.5cm)
10-1/2”
(26.7cm)
5/8”
(1.5cm)
10-3/4”
(27.3cm)
1”
(2.5cm)
3-5/8”
(9.2cm)
Optional floor
water line entry
Seeanti-tipboardinstallation
6”
(15.2cm)
9”
(22.9cm)
Cutout Dimensions (Side-By-Side)
42” Side-By-Side 42” Side-By-Side
One 2”x4” mounting board 1-1/2” (3.8 cm) x 3-1/2” (8.9 cm)
Note: If unit is installed deeper than 24” (61.0 cm), then shim behind
the mounting board by the difference.
Bottom of anti-tip board is 3-7/8” (9.8 cm) below the opening height.
Note: Top of unit must be placed firmly under anti-tip board.

17
16
One 2”x 4” mounting boards
1-1/2” (3.8 cm) x 3-1/2” (8.9 cm)
Note: If unit is installed deeper than 24” (61.0 cm), then shim
behind the mounting board by the difference.
Bottom of anti-tip board is 3-7/8” (9.8 cm) below opening height.
Note: Top of unit must be placed firmly under anti-tip board.
Anti-Tip Location
79-3/8”
(201.6cm)min.
tobottomof
anti-tipboard
80-1/2”
(204.6cm)max.
tobottomof
anti-tipboard
41”
(104.1cm)
3-1/2”
(8.9cm)
1-1/2”
(3.8cm)
Anti-Tip Dimensions (Side-By-Side)
9”
(22.9 cm)
73-3/8”
(186.4cm)
82–7/8”
(210.5cm)min.
anti-tipboard&
openingheight
84–1/16”
(213.5cm)max.
anti-tipboard&
openingheight
48”
(121.9cm)
24”
(61.0cm)
Electric Outlet Location
Water Line Entry Area
47-1/2”
(120.7cm)
6-3/4”
(17.1cm)
7-5/8”
(19.4cm)
3”
(7.6cm)
5/8”
(1.5cm)
5/8”
(1.5cm)
10-1/2”
(26.7cm)
5/8”
(1.5cm)
10-3/4”
(27.3cm)
1”
(2.5cm)
3-5/8”
(9.2cm)
Optional floor
water line entry
Seeanti-tipboardinstallation
6”
(15.2cm)
9”
(22.9cm)
Cutout Dimensions (Side-By-Side)
48” Side-By-Side 48” Side-By-Side
One 2”x4” mounting board 1-1/2” (3.8 cm) x 3-1/2” (8.9 cm)
Note: If unit is installed deeper than 24” (61.0 cm), then shim behind
the mounting board by the difference.
Bottom of anti-tip board is 3-7/8” (9.8 cm) below the opening height.
Note: Top of unit must be placed firmly under anti-tip board.

28-5/16”
(71.9cm)
75-1/2”
(191.8cm)
3/4”
(1.9cm)
18-11/16”
(47.5cm)
3/4”
(1.9cm)
28-5/16”
(71.9cm)
75-1/2”
(191.8cm)
3/4”
(1.9cm)
18-11/16”
(47.5cm)
31-5/8”
(80.3cm)
10-11/16”
(21.7cm)
12-3/8”
(31.4cm)
3/4”
(1.9cm)
3-5/32”
(8.0cm)
Overlay Dimensions (Side-By-Side)
22-13/16”
(57.9cm)
75-1/2”
(191.8cm)
3/4”
(1.9cm)
3/4”
(1.9cm)
18-3/16”
(46.2cm)
22-13/16”
(57.9cm)
75-1/2”
(191.8cm)
3/4”
(1.9cm)
18-3/16”
(46.2cm)
31-5/8”
(80.3cm)
10-11/16”
(21.7cm)
12-3/8”
(31.4cm)
3/4”
(1.9cm)
3-5/32”
(8.0cm)
Overlay Dimensions (Side-By-Side)
19
18
42” Custom Panels
42” Custom Panels
with Dispenser
48” Custom Panels
48” Custom Panels
with Dispenser
Note: Panel overlays must be dry, solid, straight one
piece panels. The use of multiple panel pieces to
achieve the dimensions is not recommended.
Note: Panel overlays must be dry, solid, straight one
piece panels. The use of multiple panel pieces to
achieve the dimensions is not recommended.

1/2”
(1.27cm)
1/8”
(.31cm)
1/2”
(1.27cm)
1/4”Radius 1/4” Radius
(1.2cm)
(1.2 cm)
1/4”Radius
(.64cm)
Reverse dimensions
for other end.
7/8”
(2.22cm)
1/2”
(1.27cm)
2-1/8”
(5.39cm)
3-1/8”
(7.94cm)
3-5/8”
(9.20cm)
1-3/8”
(3.49cm)
3/8”
(.95cm)
3/8”Radius
3/8” Radius
(.95cm) (.95 cm)
3/8”Radius
(.95cm)
47-1/2”
(120.65cm)
1/2”
(1.27cm)
3-1/8”
(7.93cm)
Optionalhingecover
46”
(116.84cm)
1/2”
(1.27cm)
3-5/8”
(9.20cm)
45-15/16”
(116.68cm)
46”
(116.84cm)
3/4”
(1.90cm)
3/4”
(1.90cm)
3-3/4”
(9.52cm)
3-3/4”
(9.52cm)
3”
(7.62cm)
3”
(7.62cm)
3/4”
(1.90cm)
30-27/32”
(78.34cm)
32-3/16”
(81.75cm)
11-17/32”
(29.28cm)
10-11/64”
(15.84cm)
1/2”
(1.27cm)
1-1/2”
(3.81cm)
1/4”Radius
(.64cm)
2-3/4”
(6.98cm)
1/2”
(1.27cm)
3/4”
(1.90cm)
Custom Grille Dimensions (Side-By-Side)
1/2”
(1.27cm)
1-1/2”
(3.81cm)
1/4”Radius
(.64cm)
2-3/4”
(6.98cm)
1/2”
(1.27cm)
3/4”
(1.90cm)
1/2”
(1.27cm)
1/8”
(.31cm)
1/2”
(1.27cm)
1/4”Radius
1/4” Radius
(1.2cm)
(1.2 cm)
1/4”Radius
(.64cm)
Reverse dimensions
for other end.
7/8”
(2.22cm)
1/2”
(1.27cm)
2-1/8”
(5.39cm)
3-1/8”
(7.94cm)
3-5/8”
(9.20cm)
1-3/8”
(3.49cm)
3/8”
(.95cm)
3/8”Radius 3/8” Radius
(.95cm) (.95 cm)
3/8”Radius
(.95cm)
41-1/2”
(105.41cm)
1/2”
(1.27cm)
3-1/8”
(7.93cm)
Optionalhingecover
40”
(101.60cm)
40”
(101.60cm)
3/4”
(1.90cm)
3/4”
(1.90cm)
3-1/4”
(9.52cm)
3-3/4”
(9.52cm)
1/2”
(1.27cm)
3-5/8”
(9.20cm)
39-15/16”
(101.44cm)
3”
(7.62cm)
3”
(7.62cm)
3/4”
(1.90cm)
24-27/32”
(63.10cm)
26-3/16”
(66.51cm)
5-17/32”
(14.04cm)
4-11/64”
(10.60cm)
Custom Grille Dimensions (Side-By-Side)
21
20
42” Custom Grille 48” Custom Grille

35”
(88.9cm)
23-13/16”
(60.4 cm)
24-3/4”
(62.9 cm)
82-7/8”
(210.5 cm)
min.
to
84-15/16”
(213.5 cm)
max.
82-7/8”
(210.5cm)
min.
to
84-1/16”
(213.5cm)
max.
75-15/16”
(192.9cm)
3-1/2”
(8.9cm)
75-15/16”
(192.9 cm)
3-1/2”
(8.9 cm)
36”
(91.5cm)
Measurementvaries
(locallysupplied hardware)
Measurementvaries
(locallysupplied hardware)
30”
(76.2cm)
29”
(73.7cm)
23-13/16”
(60.4cm)
24-3/4”
(62.9 cm)
Dimensions (All Refrigerator/Freezer)
22 23
Specifications (All Refrigerator/Freezer)
30” All Refrigerator/Freezer
Description DFFB530 DFRB530
Overall width 30” (76.2 cm)
Overall height (from bottom) 82-3/4” (210.2 cm) min. to 84-1/16” (213.5 cm) max.
Overall depth (from rear) To front edge of side trim 23-13/16” (60.5 cm)
To front of top grille 24-3/4” (62.9 cm)
To front edge of door trim 24” (61.0 cm)
Cutout width 30” (76.2 cm)
Cutout height 82-7/8” (210.5 cm) min. to 84-1/16” (213.5 cm) max.
Cutout depth 24” (61.0 cm) min.*
Electrical requirements 115 volt, 60 Hz, 15 amp dedicated circuit; 3-wire cord with
grounded 3-prong plug attached to product
Maximum amp usage 9.9 amps
Inlet water requirements 1/4” copper tubing inlet
waterline; minimum 20 psi; N/A
maximum 120 psi
Overall interior dimensions
total capacity 15.9 cu. ft. (450 liters) 18.2 cu. ft. (516 liters)
Maximum panel weight 50 lbs. (22.7 kg)
Approximate shipping weight 425 lbs. (193.2 kg)
3 ” All Refrigerator/Freezer
Description DFFB53 DFRB53
Overall width 36” (91.5 cm)
Overall height (from bottom) 82-3/4” (210.2 cm) min. to 84-1/16” (213.5 cm) max.
Overall depth (from rear) To front edge of side trim 23-13/16” (60.5 cm)
To front of top grille 24-3/4” (62.9 cm)
To front edge of door trim 24” (61.0 cm)
Cutout width 36” (91.5 cm)
Cutout height 82-7/8” (210.5 cm) min. to 84-1/16” (213.5 cm) max.
Cutout depth 24” (61.0 cm) min.*
Electrical requirements 115 volt, 60 Hz, 15 amp dedicated circuit; 3-wire cord with
grounded 3-prong plug attached to product
Maximum amp usage 9.9 amps
Inlet water requirements 1/4” copper tubing inlet
waterline; minimum 20 psi; N/A
maximum 120 psi
Overall interior dimensions
total capacity 19.1 cu. ft. (541 liters) 22.8 cu. ft. (646 liters)
Maximum panel weight 60 lbs. (27.2 kg)
Approximate shipping weight 500 lbs. (227.3 kg)
30” All Refrigerator/Freezer
36” All Refrigerator/Freezer
*Note: Full overlay models fit flush in 25” (63.5 cm) deep cabinet openings. They can be installed in standard
24” (61.0 cm) deep openings. The door faces and top grille will protrude 3/4” (1.9 cm) into the room.

One 2”x 4” mounting board
1-1/2” (3.8 cm) x 3-1/2” (8.9 cm)
Note: If unit is installed deeper than 24” (61.0 cm), then shim
behind the mounting boards by the difference.
Bottom of anti-tip board is 3-7/8” (9.8 cm) below opening height.
Note: Top of unit must be placed firmly under anti-tip board.
Anti-Tip Location
79-3/8”
(201.6cm)min.
tobottomof
anti-tipboard
80-1/2”
(204.6cm)max.
tobottomof
anti-tipboard
23”
(58.4cm)
3-1/2”
(8.9cm)
1-1/2”
(3.8cm)
9”
(22.9 cm)
73-3/8”
(186.4cm)
82-7/8”
(210.5cm)min.
anti-tipboard&
openingheight
84-1/16”
(213.5cm)max.
anti-tipboard&
openingheight
30”
(76.2cm)
24”
(61.0cm)
Electric Outlet Location
Water Line Entry Area
Note: Shown for All Freezer only.
30”
(76.2cm)
6-3/4”
(17.1cm)
7-5/8”
(19.4cm)
3”
(7.6cm)
5/8”
(1.5cm)
5/8”
(1.5cm)
10-1/2”
(26.7cm)
5/8”
(1.5cm)
10-3/4”
(27.3cm)
1”
(2.5cm)
3-5/8”
(9.2cm)
Optional floor
water line entry
Seeanti-tipboardinstallation
6”
(15.2cm)
9”
(22.9cm)
25
24
Cutout Dimensions (All Refrigerator/Freezer)
30” All Refrigerator/Freezer
Anti-Tip Dimensions (All Refrigerator/Freezer)
30” All Refrigerator/Freezer
One 2”x4” mounting board 1-1/2” (3.8 cm) x 3-1/2” (8.9 cm)
Note: If unit is installed deeper than 24” (61.0 cm), then shim behind
the mounting board by the difference.
Bottom of anti-tip board is 3-7/8” (9.8 cm) below the opening height.
Note: Top of unit must be placed firmly under anti-tip board.

One 2”x 4” mounting board
1-1/2” (3.8 cm) x 3-1/2” (8.9 cm)
Note: If unit is installed deeper than 24” (61.0 cm), then shim
behind the mounting boards by the difference.
Bottom of anti-tip board is 3-7/8” (9.8 cm) below opening height.
Note: Top of unit must be placed firmly under anti-tip board.
Anti-Tip Location
79-3/8”
(201.6cm)min.
tobottomof
anti-tipboard
80-1/2”
(204.6cm)max.
tobottomof
anti-tipboard
29”
(73.7cm)
3-1/2”
(8.9cm)
1-1/2”
(3.8cm)
9”
(22.9 cm)
73-3/8”
(186.4cm)
82-7/8”
(210.5cm)min.
anti-tipboard&
openingheight
84-1/16”
(213.5cm)max.
anti-tipboard&
openingheight
36”
(91.5cm)
24”
(61.0cm)
Electric Outlet Location
Water Line Entry Area
Note: Shown for All Freezer only.
36”
(91.5cm)
6-3/4”
(17.1cm)
7-5/8”
(19.4cm)
3”
(7.6cm)
5/8”
(1.5cm)
5/8”
(1.5cm)
10-1/2”
(26.7cm)
5/8”
(1.5cm)
10-3/4”
(27.3cm)
1”
(2.5cm)
3-5/8”
(9.2cm)
Seeanti-tipboardinstallation
6”
(15.2cm)
9”
(22.9cm)
Optional floor
water line entry
27
26
Cutout Dimensions (All Refrigerator/Freezer)
36” All Refrigerator/Freezer
Anti-Tip Dimensions (All Refrigerator/Freezer)
36” All Refrigerator/Freezer
One 2”x4” mounting board 1-1/2” (3.8 cm) x 3-1/2” (8.9 cm)
Note: If unit is installed deeper than 24” (61.0 cm), then shim behind
the mounting board by the difference.
Bottom of anti-tip board is 3-7/8” (9.8 cm) below the opening height.
Note: Top of unit must be placed firmly under anti-tip board.

75-15/16”
(192.9 cm)
3-1/2”
(8.9 cm)
30”
(76.2 cm)
29”
(73.7cm)
29-1/2”
(74.9 cm)
1”
(2.54cm)
between units
35”
(88.9cm)
82-7/8”
(210.5 cm)
min.
to
84-15/16”
(213.5 cm)
max.
36”
(91.5cm)
Measurement varies
(locally suppliedhardware)
23-13/16”
(60.5 cm)
24-3/4”
(62.9 cm)
35-1/2”
(90.2 cm)
Dimensions (All Refrigerator/Freezer)
23-13/16”
(60.5cm)
24-3/4”
(62.9cm)
82-7/8”
(210.5 cm)
min.
to
84-15/16”
(213.5 cm)
max.
Measurementvaries
(locallysupplied hardware)
30”
(76.2 cm)
29”
(73.7cm)
75-15/16”
(192.9cm)
3-1/2”
(8.9cm)
30”
(76.2cm)
29”
(73.7cm)
29-1/2”
(74.9cm)
29-1/2”
(74.9 cm)
1”
(2.54 cm)
between units
Dimensions (All Refrigerator/Freezer)
29
28
Dual 30” All Refrigerator/Freezer Dual 30” & 36” All Refrigerator/Freezer

Specifications (All Refrigerator/Freezer)
75-15/16”
(192.9 cm)
3-1/2”
(8.9 cm)
1”
(2.54 cm)
between units
35”
(88.9 cm)
82-7/8”
(210.5cm)
min.
to
84-15/16”
(213.5cm)
max.
36”
(91.5cm)
Measurement varies
(locallysuppliedhardware)
23-13/16”
(60.5cm)
24-3/4”
(62.9cm)
35-1/2”
(90.2 cm)
35-1/2”
(90.2cm)
35”
(88.9 cm)
36”
(91.5cm)
Dimensions (All Refrigerator/Freezer)
31
30
Dual All Refrigerator/Freezer
Description (2) 30” Units (1) 3 ” & (1) 30” Unit (2) 3 ” Units
Overall width 60” (152.4 cm) 66” (167.6 cm) 72” (182.9 cm)
Overall height (from bottom) 82-3/4” (210.2 cm) min. to 84-1/16” (213.5 cm) max.
Overall depth (from rear) To front edge of side trim 23-13/16” (60.5 cm)
To front of top grille 24-3/4” (62.9 cm)
To front edge of door trim 24” (61.0 cm)
Cutout width 60” (152.4 cm) 66” (167.6 cm) 72” (182.9 cm)
Cutout height 82-7/8” (210.5 cm) min. to 84-1/16” (213.5 cm) max.
Cutout depth 24” (61.0 cm) min.*
Electrical requirements (2) 115 volt, 60 Hz, 15 amp dedicated circuit; 3-wire cord with
grounded 3-prong plug attached to product
Maximum amp usage 9.9 amps per unit
Inlet water requirements 1/4” copper tubing inlet waterline; minimum 20 psi;
(All Freezer only) maximum 120 psi
Overall interior dimensions
30” freezer 15.9 cu. ft. (450 liters)
30” refrigerator 18.2 cu. ft. (516 liters)
36” freezer 19.1 cu. ft. (541 liters)
36” refrigerator 22.8 cu. ft. (646 liters)
Maximum panel weight 30” freezer or refrigerator 50 lbs. (22.7 kg)
36” freezer or refrigerator 60 lbs. (27.2 kg)
Approximate shipping weight 30” freezer or refrigerator 425 lbs. (193.2 kg)
36” freezer or refrigerator 500 lbs. (227.3 kg)
Dual 36” All Refrigerator/Freezer
*Note: Full overlay model fit flu h in 25” (63.5 cm) deep cabinet opening . They can be in talled in tandard
24” (61.0 cm) deep opening . The door face and top grille will protrude 3/4” (1.9 cm) into the room.

79-3/8”
(201.6cm)min.
tobottomof
anti-tipboard
80-1/2”
(204.6cm)max.
tobottomof
anti-tipboard
One 2”x 4” mounting board per unit
1-1/2” (3.8 cm) x 3-1/2” (8.9 cm)
Note: If unit is installed deeper than 24” (61.0 cm), then shim
behind the mounting boards by the difference.
Bottom of anti-tip board is 3-7/8” (9.8 cm) below opening height.
Note: Top of unit must be placed firmly under anti-tip board.
Anti-Tip Location
23”
(58.4cm)
3-1/2”
(8.9cm)
1-1/2”
(3.8cm)
23”
(58.4cm)
9”
(22.9cm)
73-3/8”
(186.4cm)
82-7/8”
(210.5cm)min.
anti-tipboard&
openingheight
84-1/16”
(213.5cm)max.
anti-tipboard&
openingheight
60”
(152.4cm)
24”
(61.0cm)
Electric outlet location
Water Line Entry Area
Note: Cutout opening shown with All Freezer model on left.
Reverse water line entry if All Freezer model is on right.
60”
(152.4cm)
6-3/4”
(17.1cm)
7-5/8”
(19.4cm)
3”
(7.6cm)
5/8”
(1.5cm)
5/8”
(1.5cm)
10-1/2”
(26.7cm)
5/8”
(1.5cm)
10-3/4”
(27.3cm)
3-5/8”
(9.2cm)
1”
(2.5cm)
Optional floor
water line entry
Seeanti-tipboardinstallation
6”
(15.2cm)
9”
(22.9cm)
33
32
Cutout Dimensions (All Refrigerator/Freezer)
Dual 30” All Refrigerator/Freezer
Anti-Tip Dimensions (All Refrigerator/Freezer)
Dual 30” All Refrigerator/Freezer
One 2”x4” mounting board per unit 1-1/2” (3.8 cm) x 3-1/2” (8.9 cm)
Note: If unit is installed deeper than 24” (61.0 cm), then shim behind
the mounting board by the difference.
Bottom of anti-tip board is 3-7/8” (9.8 cm) below the opening height.
Note: Top of unit must be placed firmly under anti-tip board.

79-3/8”
(201.6 cm) min.
to bottomof
anti-tipboard
80-1/2”
(204.6 cm) max.
to bottomof
anti-tipboard
One 2”x 4” mounting board per unit
1-1/2” (3.8 cm) x 3-1/2” (8.9 cm)
Note: If unit is installed deeper than 24” (61.0 cm), then shim
behind the mountingboards by the difference.
Bottom of anti-tip board is3-7/8” (9.8 cm) below opening height.
Note: Top of unit must be placedfirmly under anti-tip board.
Note: Dimensions shown for 36”All Freezer/All Refrigerator model on the left.
Reverse mounting boards if units are installed on the right.
Anti-Tip Location
29”
(73.7 cm)
3-1/2”
(8.9 cm)
1-1/2”
(3.8 cm)
23”
(58.4 cm)
9”
(22.9cm)
73-3/8”
(186.4cm)
82-7/8”
(210.5cm)min.
anti-tipboard&
openingheight
84–1/16”
(213.5cm)max.
anti-tipboard&
openingheight
66”
(167.6cm)
24”
(61.0cm)
Electric Outlet Location
Water Line Entry Area
Note: Cutout opening shown with All Freezer model on left.
Reverse water line entry if All Freezer model is on right.
66”
(167.6cm)
6-3/4”
(17.1cm)
7-5/8”
(19.4cm)
3”
(7.6cm)
5/8”
(1.5cm)
5/8”
(1.5cm)
10-1/2”
(26.7cm)
5/8”
(1.5cm)
10-3/4”
(27.3cm)
3-5/8”
(9.2cm)
1”
(2.5cm)
Optional floor
water line entry
Seeanti-tipboardinstallation
6”
(15.2cm)
9”
(22.9cm)
35
34
Cutout Dimensions (All Refrigerator/Freezer)
Dual 30” & 36” All Refrigerator/Freezer
Anti-Tip Dimensions (All Refrigerator/Freezer)
Dual 30” & 36” All Refrigerator/Freezer
One 2”x4” mounting board per unit 1-1/2” (3.8 cm) x 3-1/2” (8.9 cm)
Note: If unit is installed deeper than 24” (61.0 cm), then shim behind
the mounting board by the difference.
Bottom of anti-tip board is 3-7/8” (9.8 cm) below the opening height.
Note: Top of unit must be placed firmly under anti-tip board.
Note: Dimensions shown for 36” All Freezer/All Refrigerator model
on the left. Reverse mounting boards if untis are installed on the right.

79-3/8”
(201.6cm)min.
tobottomof
anti-tipboard
80-1/2”
(204.6cm)max.
tobottomof
anti-tipboard
One 2”x 4” mounting board per unit
1-1/2” (3.8 cm) x 3-1/2” (8.9 cm)
Note: If unit is installed deeper than 24” (61.0 cm), then shim
behind the mounting boards by the difference.
Bottom of anti-tip board is 3-7/8” (9.8 cm) below opening height.
Note: Top of unit must be placed firmly under anti-tip board.
Anti-Tip Location
29”
(73.7cm)
3-1/2”
(8.9cm)
1-1/2”
(3.8cm)
29”
(73.7cm)
Anti-Tip Dimensions (All Refrigerator/Freezer)
9”
(22.9cm)
73-3/8”
(186.4cm)
82-7/8”
(210.5cm)min.
anti-tipboard&
openingheight
84-1/16”
(213.5cm)max.
anti-tipboard&
openingheight
72”
(182.9cm)
24”
(61.0cm)
Electric Outlet Location
Water Line Entry Area
Note: Cutout opening shown with All Freezer model on left.
Reverse water line entry if All Freezer model is on right.
72”
(182.9cm)
6–3/4”
(17.1cm)
7-5/8”
(19.4cm)
3”
(7.6cm)
5/8”
(1.5cm)
5/8”
(1.5cm)
10-1/2”
(26.7cm)
5/8”
(1.5cm)
10-3/4”
(27.3cm)
3-5/8”
(9.2cm)
1”
(2.5cm)
Optional floor
water line entry
Seeanti-tipboardinstallation
6”
(15.2cm)
9”
(22.9cm)
Cutout Dimensions (All Refrigerator/Freezer)
37
36
Dual 36” All Refrigerator/Freezer Dual 36” All Refrigerator/Freezer
One 2”x4” mounting board per unit 1-1/2” (3.8 cm) x 3-1/2” (8.9 cm)
Note: If unit is installed deeper than 24” (61.0 cm), then shim behind
the mounting board by the difference.
Bottom of anti-tip board is 3-7/8” (9.8 cm) below the opening height.
Note: Top of unit must be placed firmly under anti-tip board.

1/2”
(1.27cm)
1-1/2”
(3.81cm)
1/4”Radius
(.64cm)
2-3/4”
(6.98cm)
1/2”
(1.27cm)
3/4”
(1.90cm)
1/2”
(1.27cm)
1/8”
(.31cm)
1/2”
(1.27cm)
1/4”Radius1/4” Radius
(1.2cm)
(1.2 cm)
1/4”Radius
(.64cm)
Reverse dimensions
for other end.
7/8”
(2.22cm)
1/2”
(1.27cm)
2-1/8”
(5.39cm)
3-1/8”
(7.94cm)
3-5/8”
(9.20cm)
1-3/8”
(3.49cm)
3/8”
(.95cm)
3/8”Radius
3/8” Radius
(.95cm) (.95 cm)
3/8”Radius
(.95cm)
29-1/2”
(74.93cm)
1/2”
(1.27cm)
3-1/8”
(7.93cm)
Optionalhingecover
1/2”
(1.27cm)
3-5/8”
(9.20cm)
27-15/16”
(70.96cm)
28”
(71.12cm)
28”
(71.12cm)
3/4”
(1.90cm)
3/4”
(1.90cm)
3-3/4”
(9.52cm)
3-3/4”
(9.52cm)
3”
(7.62cm)
3”
(7.62cm)
3/4”
(1.90cm)
26-3/16”
(66.51cm)
5-17/32”
(14.10cm)
4-11/64”
(10.59cm)
24-27/32”
(63.10cm)
Custom Grille Dimensions (All Refrigerator/Freezer)
35-1/4”
(89.5cm)
75-1/2”
(191.8cm)
3/4”
(1.9 cm)
29-1/4”
(74.3cm)
75-1/2”
(191.8 cm)
3/4”
(1.9 cm)
Overlay Dimensions (All Refrigerator/Freezer)
39
38
30” Custom Panels
36” Custom Panels
30” Custom Grille
Note: Hardware placement can vary depending
on single or dual installation.
Note: Panel overlays must be dry, solid, straight
one piece panels. The use of multiple panel
pieces to achieve the dimensions is not
recommended.