Vintage Vibe Wurly 200A User manual
200 & 200A
Wurlitzer Vari Vibe Installation
MODEL 200 VINTAGE AMPLIFIER.........................PAGE 2
MODEL 200A VINTAGE AMPLIFIER.....................PAGE 3
VINTAGE VIBE CLASSIC 200 AMP.......................PAGE 4
VINTAGE VIBE 200A AMP ................................PAGE 5
1
TABLE OF CONTENTS
2
MODEL 200 VINTAGE AMPLIFIER
1. Unplug piano from wall outlet and ensure all voltage is drained from circuit before installation.
3. Remove R42* (1K)
4. Replace R45 (15K)1.2K resistor.
5. Replace R36 (8.2K)3.9K resistor.
1 (slate)
13 (orange)
3
MODEL 200A VINTAGE AMPLIFIER
1. Unplug piano from wall outlet and ensure all voltage is drained from circuit before installation.
R15 (680K)
R32
4
1. Unplug piano from wall outlet and ensure all voltage is drained from circuit before installation.
3. Remove R26 (1K)
4. Replace R21 (15K)1.2K resistor.
5. Replace R25 (8.2K)3.9K resistor.
G
H
R38 (10
Ω
)
1. Unplug piano from wall outlet and ensure all voltage is drained from circuit before installation.
R1 (680K)
R30
5
Other manuals for Wurly 200A
1
This manual suits for next models
1
Table of contents
Other Vintage Vibe Amplifier manuals
