8
GROUNDING INSTRUCTIONS
General – This air mo er shall be grounded while in use to protect the operator from electrical
shock. The machine is pro ided with a three – conductor cord and a three – contact grounding
type attachment plug to fit the proper grounding type receptacle.
The green (or green & yellow) conductor in the cord is the grounding wire. Ne er connect this wire to
anything other than the grounding pin of the attachment plug.
Make sure that all the safety functions are normal, and ensure that the actual operation oltage is in
accordance with the required oltage rate.Make sure that the machine is connected to an outlet
ha ing the same configuration as the plug. No adapter should be used with this machine.
This machine is intended for commercial use only. It is constructed for use in an indoor en ironment
and is not intended for any other use.
BASIC OPERATION
1)Check the machine for any obstructions in fan prior to operation.
• If an item blocks the intakes of the air mo er, this will hurt the performance of the machine,
and could cause the motor to o erheat.
2)Adjust machine to desired position for operation by pulling it back to its preset height
adjustments.(Air blower drying direction without stretching rod is referred to “
F1
F1F1
F1
”;Air blower drying
direction with stretching rod is referred to “
F2
F2F2
F2
”,)
3)Plug power cord into a grounded outlet.
• Do not use an extension cord in conjunction with the standard power cord.
4)This machine has 3 power settings. Turn the power knob to the desired speed.
• Low = 1 Med = 2 High = 3.
5)To stop the machine at any time, simply turn the power knob to the “off” position.
• Ne er stick any object into the air inlet ents or the air outlet ent.
NOTE: The Air Mo er has an onboard circuit breaker. If the auxiliary outlet o erloads, the circuit
breaker will trip. If the breaker trips, unplug the units and press the circuit breaker reset button. Plug
the units back into the power source and turn on the switch.
ENGLISH OPERATING INSTRUCTIONS
