vipp 911 Operation manual

Vipp911/912/913
MIRROR
installation anD care instructions

installation GuiDe
VERTICALLY
Vipp911/912/913
MIRROR
Please use correct wall anchors and screws matching both the weight of the mirror and
the wall type.
care instructions
POWDER-COATED SURFACES
Keep powder-coated surfaces clean and dry. Use a lint-free cleaning cloth or a soft brush
with warm water and a mild detergent.
TIPS FOR STAINS
Grease stains: Use alcohol or glass cleaner to remove grease stains. Then follow the
guide for maintenance above.
Lime stains on the black (rough) surface: Use a mild descaler suitable for painted sur-
faces. Use a lint-free cleaning cloth. Rinse with clean water and finally wipe with a dry
cloth.
GLASS SURFACES
Use a lint-free cleaning cloth with spray based glass cleaner.
installation GuiDe
HORISONTALLY
Vipp911/912/913
MIRROR
Please use correct wall anchors and screws matching both the weight of the mirror and
the wall type. The total weight of each mirror type is listed below:
Drill holes for the mounting brackets. Mount the brackets with anchors and screws.
Adjust the height of the brackets with a spirit level. Place the mirror against the wall
and slide it downwards until the mirror frame locks properly onto both brackets. If you
can pull the mirror outwards without detaching it from the brackets, the mounting is
complete and durable.
WEIGHT
VIPP911: 7,5 kg/16.5 lbs
VIPP912: 13,5 kg/29,8 lbs
VIPP913: 20 kg/44 lbs
Please follow the installation guide on
the previous page.
7 cm/2.8 in
7 cm/2.8 in
35 cm/13.8 in
3 cm/1.2 in
3 cm/1.2 in
2,5 cm / 1.0 in
2,5 cm / 1.0 in
VIPP913 = 172 cm/67.7 in
VIPP912 = 112 cm/44.0 in
VIPP911 = 52 cm/20.5 in